ISUTAMI BEARINGS
en
Bearing Storage
ISUTAMI BEARINGS

Bearing Storage

 Bearings with special anti-corrosion coatings are available, but most bearings are not manufactured from corrosion resistant materials. When handling and storing bearings, care must be taken to ensure that they will not rust or corrode. Even a small amount of moisture or chemical left on an unprotected bearing by a glove or hand can result in a small etched area, which may initiate bearing fatigue.

New and remanufactured Bearings shall be shipped with a protective coating, are typically covered in a protective paper or other wrapping, and are shipped in a carton or crate. When receiving a new or remanufactured bearing, do not remove it from its packaging until ready to install in the application.

Do not store bearings directly on concrete floors, where water can condense and collect on the bearing. .Store the bearings on a pallet or shelf, in an area where the bearings will not be subjected to high humidity or sudden and severe temperature changes that may result in condensation forming.

Always put oiled paper or, if not available, plastic sheets between rollers and cup races of tapered roller bearings or other type bearings.
Related News
  • Bearing Standards

    Bearing Standards

    August 30, 2018ABMA: American Bearing Manufacturers Association The American Bearing Manufacturers Association (ABMA), formerly the Anti Friction Bearing Manufacturers Association, plays an important leadership role...view
  • US To Keep Antidumping Duties On Tapered Roller Bearings From China

    US To Keep Antidumping Duties On Tapered Roller Bearings From China

    August 30, 2018The United States determined Tuesday it would continue to slap antidumping duties against tapered roller bearings from China.Revoking the current antidumping duty order on imports of Chinese tapered r...view
  • Indian Bearing Industry: High In Demand

    Indian Bearing Industry: High In Demand

    August 30, 2018The Indian Bearing industry has grown steadily over the past few years. The industrial segment has evolved rapidly since the time of industrial revolution and is regarded as the main hub of modern mac...view
  • Characteristics of Tapered Roller Bearings

    Characteristics of Tapered Roller Bearings

    April 4, 2019Before buying tapered roller bearings, it is necessary to know the relevant knowledge of original crime stick bearings. This paper will introduce the characteristics and classification of tapered roll...view
  • What Are ABEC Ratings?

    What Are ABEC Ratings?

    August 30, 2018The ABEC scale is an industry accepted standard for the tolerances of a ball bearing. It was developed by the Annular Bearing Engineering Committee (ABEC) of the American Bearing Manufacturers Associa...view
  • The Method of Minimizing the Noise of Tapered Roller Bearing

    The Method of Minimizing the Noise of Tapered Roller Bearing

    April 4, 2019Bearing is essential for mechanical operation. It is imperative to buy tapered roller bearings. But bearing is one of the sources of mechanical noise. After buying tapered roller bearings, how can we ...view
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China