ISUTAMI BEARINGS
en
Ball Bearings 1600 Series
E-catalog
Product Inquiry

Ball Bearings 1600 Series

Ball Bearings 1600 Series
The common lubricating oil of ISUTAMI is mineral lubricating oil and synthetic lubricating oil.Mineral lubricants are generally added with additives such as rust prevention, oxidation resistance and extreme pressure resistance.Synthetic lubricants are expensive and have properties such as radiation resistance, oxidation resistance, flame resistance, high temperature resistance and low temperature resistance.

Ball Bearings 1600 Series Size Chart

Product Number Bore Dia (d) Outer Dia(D) Width(B) Dynamic Load Static Load
Rating Rating
Cr(N) Cor(N)
1601 3/16 11/16 1/4 491 194
1601 2RS 3/16 11/16 1/4 491 194
1601 ZZ 3/16 11/16 1/4 491 194
1602 1/4 11/16 1/4 491 194
1602 2RS 1/4 11/16 1/4 491 194
1602 ZZ 1/4 11/16 1/4 491 194
1603 5/16 7/8 9/32 747 317
1603 2RS 5/16 7/8 9/32 747 317
1603 ZZ 5/16 7/8 9/32 747 317
1604 3/8 7/8 9/32 747 317
1604 2RS 3/8 7/8 9/32 747 317
1604 ZZ 3/8 7/8 9/32 747 317
1605 5/16 29/32 5/16 935 390
1605 2RS 5/16 29/32 5/16 935 390
1605 ZZ 5/16 29/32 5/16 935 390
1606 3/8 29/32 5/16 935 390
1606 2RS 3/8 29/32 5/16 935 390
1606 ZZ 3/8 29/32 5/16 935 390
1607 7/16 29/32 5/16 935 390
1607 2RS 7/16 29/32 5/16 935 390
1607 ZZ 7/16 29/32 5/16 935 390
1614 3/8 1-1/8 3/8 1047 465
1614 2RS 3/8 1-1/8 3/8 1047 465
1614 ZZ 3/8 1-1/8 3/8 1047 465
1615 7/16 1-1/8 3/8 1047 465
1615 2RS 7/16 1-1/8 3/8 1047 465
1615 ZZ 7/16 1-1/8 3/8 1047 465
1616 1/2 1-1/8 3/8 1047 465
1616 2RS 1/2 1-1/8 3/8 1047 465
1616 ZZ 1/2 1-1/8 3/8 1047 465
1620 7/16 1-3/8 7/16 1525 747
1620 2RS 7/16 1-3/8 7/16 1525 747
1620 ZZ 7/16 1-3/8 7/16 1525 747
1621 1/2 1-3/8 7/16 1525 747
1621 2RS 1/2 1-3/8 7/16 1525 747
1621 ZZ 1/2 1-3/8 7/16 1525 747
1622 9/16 1-3/8 7/16 1525 747
1622 2RS 9/16 1-3/8 7/16 1525 747
1622 ZZ 9/16 1-3/8 7/16 1525 747
1623 5/6 1-3/8 7/16 1525 747
1623 2RS 5/6 1-3/8 7/16 1525 747
1623 ZZ 5/6 1-3/8 7/16 1525 747
1628 5/8 1-5/8 1/2 2109 1150
1628 2RS 5/8 1-5/8 1/2 2109 1150
1628 ZZ 5/8 1-5/8 1/2 2109 1150
1630 3/4 1-5/8 1/2 2109 1150
1630 2RS 3/4 1-5/8 1/2 2109 1150
1630 ZZ 3/4 1-5/8 1/2 2109 1150
1633 5/8 1-3/4 1/2 2109 1150
1633 2RS 5/8 1-3/4 1/2 2109 1150
1633 ZZ 5/8 1-3/4 1/2 2109 1150
1635 3/4 1-3/4 1/2 2109 1150
1635 2RS 3/4 1-3/4 1/2 2109 1150
1635 ZZ 3/4 1-3/4 1/2 2109 1150
1638 3/4 2 9/16 3150 1785
1638 2RS 3/4 2 9/16 3150 1785
1638 ZZ 3/4 2 9/16 3150 1785
1640 7/8 2 9/16 3150 1785
1640 2RS 7/8 2 9/16 3150 1785
1640 ZZ 7/8 2 9/16 3150 1785
1641 1 2 9/16 3150 1785
1641 2RS 1 2 9/16 3150 1785
1641 ZZ 1 2 9/16 3150 1785
1652 1-1/8 2-1/2 5/8 2880 1890
1652 2RS 1-1/8 2-1/2 5/8 2880 1890
1652 ZZ 1-1/8 2-1/2 5/8 2880 1890
1654 1-1/4 2-1/2 5/8 2880 1890
1654 2RS 1-1/4 2-1/2 5/8 2880 1890
1654 ZZ 1-1/4 2-1/2 5/8 2880 1890
1657 1-1/4 2-9/16 11/16 3369 2251
1657 2RS 1-1/4 2-9/16 11/16 3369 2251
1657 ZZ 1-1/4 2-9/16 11/16 3369 2251
1658 1-5/16 2-9/16 11/16 3369 2251
1658 2RS 1-5/16 2-9/16 11/16 3369 2251
1658 ZZ 1-5/16 2-9/16 11/16 3369 2251

Ball Bearings 1600 Series Features

Bearing rated loads that meet the requirements must take into account all forces to be borne by the device and the corresponding time at which each force ACTS on the bearing during its given period.The bearing may be subject to various conditions or working conditions statistics.The bearing load unit was N, the speed unit was r/min, and the effective action time percentage was expressed in each case within the predetermined life time of the bearing.These can be reduced to equivalent loads P, and then, in each case, equivalent loads are determined in the appropriate way.

It is important to note that the bearing bears heavy loads, but working conditions such as non-movement are particularly dangerous because of the small indentation of the capacity of the rolling body and the ring, which creates a strong impact, as if the automobile tires had rolled over the potholes.This kind of small indentation like sinkhole can quickly develop into pitting in the working process, which will result in bearing failure.The other condition is the opposite, high speed but low load.At this time, if no preloading is applied, the rolling body will slide heavily on the roll path, which will lead to rapid overheating, breakdown of lubricant and permanent damage.An important load often neglected in bearing selection is the radial force and axial force generated by the device itself.The weight of the bearing, the tension of other parts, and even the weight of the shaft are important forces to be added to the total load.

LEAVE_MESSAGE_PROMPT

  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China