ISUTAMI BEARINGS
en
Ball Joint
E-catalog
ISUTAMI BEARINGS

Ball Joint

Ball Joint
The ball joint with the edge of the axle hole of the ball head shell through the ball head seat at the front end. The ball head and the steering spindle are embedded in the groove of the inner hole of the ball head seat, which can reduce the wear of the ball head and improve the tensile strength of the spindle.The ball head ball connection is an important part of the connector, its role is installed between the ball head and the connecting rod body, to achieve the mechanical connection between the ball head and the connecting rod body and the transmission of power, the driving force of the ball head part can drive the connecting rod part to move through the ball head connecting rod.
Ball Joint
The ball joint with the edge of the axle hole of the ball head shell through the ball head seat at the front end. The ball head and the steering spindle are embedded in the groove of the inner hole of the ball head seat, which can reduce the wear of the ball head and improve the tensile strength of the spindle.The ball head ball connection is an important part of the connector, its role is installed between the ball head and the connecting rod body, to achieve the mechanical connection between the ball head and the connecting rod body and the transmission of power, the driving force of the ball head part can drive the connecting rod part to move through the ball head connecting rod.

Ball Joint Products


Ball Joint Advantages

Ball joint connecting rod solves the problem of single structure of ball joint rod in existing technology.The main advantages are in the ball head connecting rod, including the ball and socket end and the straight rod end, the ball and socket end is composed of the connecting part and the ball part fixed as a whole, one end of the straight rod end is fixedly connected with the connecting part, and the ball part is internally opened with a hollow cavity.A first convex shaft and a second convex shaft are also fixedly connected on the end of the ball and socket, and the first convex shaft and the second convex shaft are located on the same side of the ball and socket end and extend in the opposite direction.As a preferred embodiment, the connecting part is cylindrical, the end of the straight rod end is inserted into the end of the connecting part, and the connection between the straight rod end and the connecting part is circumferentially welded and fixed.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China