ISUTAMI BEARINGS
DIN71802 Axial Joint Similar
E-catalog
ISUTAMI BEARINGS

DIN71802 Axial Joint Similar

DIN71802 Axial Joint Similar
ISUTAMI ball joint is installed between the ball head and the connecting rod body to realize the mechanical connection between the ball head and the connecting rod body and the transmission of power. The driving force of the ball head part can drive the connecting rod part to move through the ball head connecting rod.An important part of the connector is the pull rod of the ball head housing and the ball head of the steering shaft in the housing. The ball head is hinged with the edge of the axle hole of the ball head housing through the ball head seat at the front of the housing. The ball head seat and the steering spindle are embedded in the hole surface groove of the ball head housing, which can reduce the wear of the ball head and improve the tensile strength of the spindle.
DIN71802 Axial Joint Similar
ISUTAMI ball joint is installed between the ball head and the connecting rod body to realize the mechanical connection between the ball head and the connecting rod body and the transmission of power. The driving force of the ball head part can drive the connecting rod part to move through the ball head connecting rod.An important part of the connector is the pull rod of the ball head housing and the ball head of the steering shaft in the housing. The ball head is hinged with the edge of the axle hole of the ball head housing through the ball head seat at the front of the housing. The ball head seat and the steering spindle are embedded in the hole surface groove of the ball head housing, which can reduce the wear of the ball head and improve the tensile strength of the spindle.

DIN71802 Axial Joint Similar Size Chart

Axial Joint Similar DIN71802

Part NO Dimensions(mm) F in N Weight(kg)
d1
h9
d2 a la l3 e
SQZ8 8 M5 22 19.2 9 10.2 30.0 0.0152
SQZ10 10 M6 25 23.5 11 11.5 40.0 0.0252
SQZ13 13 M8 30 29.5 13 14 60.0 0.0531
SQZ16 16 M10 35 36.0 16 15.5 80.0 0.1038
SQZ19 19 M14*1.5 45 48.0 20 21.5 100.0 0.2209

DIN71802 Axial Joint Similar Features

The distortion caused by thermal effect in process system of ball joint, such as the error caused by thermal deformation of machine tool, cutter and workpiece.In the machining process, reasonable location relationship between tool and workpiece machining surface, surface machining precision can meet the processing requirements, otherwise will not be able to meet the processing requirements, the machining accuracy analysis is to analyze and research machining accuracy does not meet the requirements of various factors, namely the possibility of various original errors, and take effective technical measures to overcome, to improve the machining accuracy.In machining, machine tools, fixtures, workpieces and tools constitute a complete system, known as the process system.Due to the structure and state of the process system itself, the operation process and the physical and mechanical phenomena in the processing process, the relative position of the tool and the workpiece deviation caused by various factors is called the original error.It can still, zoom in or out to reflect the workpiece, so that the workpiece processing error and affect the accuracy of parts processing.Part of the original error is related to the cutting process.Part of the original error is related to the initial state of the process system itself.These two errors are affected by environmental conditions, operator's technical level and other factors.The original error related to the initial state of the process system, the principle error is the error existing in the principle of the processing method.Process system geometric errors, relative position of workpiece and tool in the static error, such as tool and fixture manufacturing error, adjustment error and installation error.The relative position of the workpiece and the tool in the state of motion error, such as the machine tool spindle rotation error, guide rail error, transmission chain transmission error.The original error related to the cutting process, the deformation caused by the force effect of the process system, such as the deformation of the process system, the production and disappearance of the internal stress of the workpiece, etc.Distortion caused by thermal effect of process system, such as thermal deformation of machine tools, cutting tools and workpieces.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China