ISUTAMI BEARINGS
en
Eccentric Collar Locking Bearing
E-catalog
ISUTAMI BEARINGS

Eccentric Collar Locking Bearing

Eccentric Collar Locking Bearing
Eccentric Collar Locking Bearing outer spherical Bearing with Eccentric bush at the top wire performance similar.Spherical bearings are suitable for a variety of equipment and parts of simple occasions, such as agricultural machinery, transport systems or construction machinery.

Eccentric Collar Locking Bearing the following series is also available for choice: with vertical outer spherical ball Bearing, square seat belt outside the spherical Bearing, insert ball Bearing units with rhombic block, belt round convex outer spherical ball Bearing, insert ball Bearing units with ring seat, with sliding block insert ball Bearing, insert ball Bearing units with suspension seat, with hanging outside the spherical ball Bearing, insert ball Bearing units with adjustable diamond hill, with stamping outer spherical ball Bearing, insert ball Bearing units with other cities.
Eccentric Collar Locking Bearing
Eccentric Collar Locking Bearing outer spherical Bearing with Eccentric bush at the top wire performance similar.Spherical bearings are suitable for a variety of equipment and parts of simple occasions, such as agricultural machinery, transport systems or construction machinery.

Eccentric Collar Locking Bearing the following series is also available for choice: with vertical outer spherical ball Bearing, square seat belt outside the spherical Bearing, insert ball Bearing units with rhombic block, belt round convex outer spherical ball Bearing, insert ball Bearing units with ring seat, with sliding block insert ball Bearing, insert ball Bearing units with suspension seat, with hanging outside the spherical ball Bearing, insert ball Bearing units with adjustable diamond hill, with stamping outer spherical ball Bearing, insert ball Bearing units with other cities.

Eccentric Collar Locking Bearing Products


Eccentric Collar Locking Bearing Features

Eccentric Collar Locking Bearing was used to loosen the Locking screw at the Eccentric Bearing sleeve with an inner hexagon wrench at the time of dismantling, and then the Eccentric Bearing sleeve was loosened by inserting a small iron bar into the counterbore at the Eccentric cover sleeve against the rotation direction of the shaft.Loosen the bolts holding the bearing seat.Remove the bearing along with the bearing housing from the shaft.Note before removing the bearing housing at one end of the shaft.The bearing seat bolt on the other end of the shaft shall be loosened to avoid damage caused by mutual locking of the two ends of the bearing.Before installing the bearing on the shaft, the fixing pin of the bearing jacket must be removed first, and the surface of the shaft neck shall be polished smooth and clean, and the shaft neck shall be coated with oil, rust prevention and lubrication.Grease the mating surface of the bearing seat and the bearing, and load the bearing into the bearing seat.Then the assembled bearing is sleeved on the shaft together with the bearing seat.Push to the desired location for installation.Do not tighten the bolts to fix the bearing housing, but allow the bearing housing to rotate.Also install the other end of the same shaft bearing and seat, will turn the shaft several times, so that the bearing itself automatically find the right position.Then tighten the bearing seat bolts.Install eccentric sleeve.Firstly, put the eccentric sleeve on the eccentric step of the bearing inner sleeve and tighten it by hand in the direction of rotation.Then insert the small iron rod into or against the counterbore on the eccentric sleeve.Strike a small iron bar with a hand hammer along the axis of rotation.Make the eccentric sleeve set firmly, and finally lock the hexagon socket screw on the eccentric sleeve.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China