ISUTAMI BEARINGS
en
Flange Cartridge Mounted Bearing Unit
E-catalog
ISUTAMI BEARINGS

Flange Cartridge Mounted Bearing Unit

Flange Cartridge Mounted Bearing Unit
ISUTAMI flange cartridge mounted bearing unit, also known as 4-bolt round flange mounted bearing unit, is the combination of a flange housing and an insert outer spherical bearing. It is used when the bearing mounting surface is perpendicular to the shaft. The bearings are usually with rubber sealing rings on both sides for dust-proof effect. The inner ring of the bearing is also precision machined and rounded for installation with the shaft. The housing flange of the bearing unit is distributed with four precision grounded fixing holes for installing the entire bearing unit. The dimensions of the inner ring and housing in the bearing unit are shown in inch or metric unit.
Flange Cartridge Mounted Bearing Unit
ISUTAMI flange cartridge mounted bearing unit, also known as 4-bolt round flange mounted bearing unit, is the combination of a flange housing and an insert outer spherical bearing. It is used when the bearing mounting surface is perpendicular to the shaft. The bearings are usually with rubber sealing rings on both sides for dust-proof effect. The inner ring of the bearing is also precision machined and rounded for installation with the shaft. The housing flange of the bearing unit is distributed with four precision grounded fixing holes for installing the entire bearing unit. The dimensions of the inner ring and housing in the bearing unit are shown in inch or metric unit.

Flange Cartridge Mounted Bearing Unit Products


Flange Cartridge Mounted Bearing Unit Features

The round flange housing of flange cartridge mounted bearing unit supplied by ISUTAMI is usually one-piece, made of cast iron or thermoplastic. The surface of the cast iron is nickel plated or coated with other anti-corrosive materials to extend the service life. The housing has a built-in grease nipple to help with bearing lubrication, and also to prevent problems such as internal wear of the bearing.

The bearing housing is a solid base, wide inner bore, double contact seal, side steel plate tail can be dust-proof, full self-alignment, with grease fittings for adding lubricant. The inner ring of the unit is divided into two types: set screw type and eccentric lock type according to the ways that the shaft is mounted. Two set screws 120°apart in inner ring lock unit securely to shaft, and the eccentric locking collar unit provides locking for one-way applications. Styles include:

UCFCS Series - Normal duty, Wide inner ring, Set screw locking;
UCFC Series - Normal duty, Wide inner ring, Set screw locking;
HCFC Series - Normal duty, Wide inner ring, Eccentric collar lock.

In addition, ISUTAMI can also design and produce unconventional products according to customer's drawings.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China