ISUTAMI BEARINGS
en
GEG-E Radial Spherical Plain Bearings
E-catalog
ISUTAMI BEARINGS

GEG-E Radial Spherical Plain Bearings

GEG-E Radial Spherical Plain Bearings
ISUTAMI spherical plain bearing is a spherical sliding bearing, its sliding contact surface is an inner spherical surface and an outer spherical surface, movement can be in any Angle of rotation swing, lubrication and self-lubrication.Joint bearing has the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self-aligning and good lubrication.GEG - E radial spherical plain bearings, single slit outer ring, oil groove, with seals on both sides.It can bear radial load and small axial load in either direction.
GEG-E Radial Spherical Plain Bearings
ISUTAMI spherical plain bearing is a spherical sliding bearing, its sliding contact surface is an inner spherical surface and an outer spherical surface, movement can be in any Angle of rotation swing, lubrication and self-lubrication.Joint bearing has the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self-aligning and good lubrication.GEG - E radial spherical plain bearings, single slit outer ring, oil groove, with seals on both sides.It can bear radial load and small axial load in either direction.

GEG-E Radial Spherical Plain Bearings Size Chart

Radial Spherical Plain Bearings GEG-E

Bearing No. Dimensions Basic Load Rating Weight
d D B C dk rs r1s αo Dynamic Static (kg)
min min C(KN) Co(KN)
GEG6E 6 16 9 5 13 0.3 0.3 21 5.5 27 0.006
GEG8E 8 19 11 6 16 0.3 0.3 21 8.1 40 0.014
GEG10E 10 22 12 7 18 0.3 0.3 18 10 53 0.021
GEG12E 12 26 15 9 22 0.3 0.3 18 16 84 0.033

GEG-E Radial Spherical Plain Bearings Feature

When the rod end joint bearing is running, the bearing part is allowed to have a certain temperature. When you touch the housing of the mechanism with your hand, it is normal not to feel hot. On the contrary, it indicates that the bearing temperature is too high.The bearing temperature is too high, the quality of the lubricating oil does not meet the requirements or deterioration, the viscosity of the lubricating oil is too high.The assembly is too tight, the bearing assembly is too tight, the bearing seat ring rotates on the shaft or in the shell, the load is too large, the rod end joint bearing cage or the rolling body is broken and so on.The rod end joint bearing is allowed to have a slight running noise in the work. If the noise is too loud or there is abnormal noise or crash sound, it indicates that the bearing is faulty.Check whether the actual load and speed of the bearing are different from the original calculation, and whether the bearing type is correct.Understand the abnormal phenomena during and near the damage, especially the appearance and evolution of noise and heat.Pay attention to check the power supply and the adjacent mechanical components of the rod end joint bearing for any abnormal phenomena during this period.Analyze the type of noise, pitch, and frequency of the interference rhythm.Note when the temperature suddenly increased, etc., and note the power supply and other parts of the machine.Make clear the configuration characteristics and mating characteristics of the rod end joint bearing in the main engine, judge whether it is properly configured, and record the position of the ring relative to the shell and relative to the direction of load.Make the shaft together with the damaged bearing to run several turns by hand to experience the weight of the operation, and then push the shaft back and forth several times along the axis to feel the tightness of the shaft along the axis, and measure the deflection of the shaft if necessary;Check the bearing parts, find out the lubrication, the situation and pollution situation, whether the lubricant brand and sealing way is wrong, pay attention to in temperature, bearing temperature is more than the temperature of lubricant used, key check the oil level, whether the oil seal clearance leakage, and moisture, dust or other foreign material whether has invaded rod end joint bearing, for oil system has fault, feeling the existence of have an effect on bearing vibration source.Debris or particle source, water source or fluid pollution source, current source that can flow through the rod end joint bearing;According to the inspection, it can be used to determine whether the bearing damage is caused by fretting corrosion, wear, corrosion or electrical corrosion.When the bearing is disassembled and inspected, the failure and damage reason of the rod end joint bearing can be judged according to the damage condition of the bearing.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China