ISUTAMI BEARINGS
en
Linear Bearing Inch
E-catalog
ISUTAMI BEARINGS

Linear Bearing Inch

Linear Bearing Inch
ISUTAMI inch linear bearing is a series of the precision part, so it has high requirements in use. Even if a high-performance inch linear bearing system is used, if it is used improperly, it will not achieve the desired performance and it will easily damage the bearing. Therefore, pay attention to the following when using linear bearings. Keeping the inch linear bearings and their surroundings clean, even if small dust is not visible to the bearings, it will increase the wear, vibration, and noise of the linear bearings. Be careful when using and installing, do not allow strong stamping, do not allow the direct impact of the hammer bearing, and do not allow pressure to be transmitted through the rolling elements.
Linear Bearing Inch
ISUTAMI inch linear bearing is a series of the precision part, so it has high requirements in use. Even if a high-performance inch linear bearing system is used, if it is used improperly, it will not achieve the desired performance and it will easily damage the bearing. Therefore, pay attention to the following when using linear bearings. Keeping the inch linear bearings and their surroundings clean, even if small dust is not visible to the bearings, it will increase the wear, vibration, and noise of the linear bearings. Be careful when using and installing, do not allow strong stamping, do not allow the direct impact of the hammer bearing, and do not allow pressure to be transmitted through the rolling elements.

Linear Bearing Inch Products


Linear Bearing Inch Features

Use suitable and accurate installation tools, use special tools whenever possible, and avoid fabrics and short fibers as much as possible. In order to prevent the corrosion of the linear bearing, directly take the linear bearing by hand, fully wash the sweat on the hand, and apply high-quality mineral oil before the operation, especially in the rainy season and summer to pay attention to rust prevention. Linear special bearings can achieve a long design life under special operating conditions. In particular, in rolling surfaces such as rails and rolling parts, the lubricant film should be effectively isolated to adequately limit surface damage caused by contaminants. In fact, under ideal conditions, the life of a permanent bearing is achievable.

The life of a rolling bearing is measured by the number of revolutions. If the linear inch bearing exceeds the life value, initial fatigue damage (peeling or defects) should occur on any bearing ring or rolling element. However, whether in the laboratory test or in actual use, the working conditions can be clearly seen, and the actual bearing life is very different. In addition, the bearing "life" has several different definitions, one of which is the so-called "work-life", which means that a bearing in real life can be worn before damage, the damage is usually not caused by fatigue, but by wear, corrosion, seal damage and other reasons.

  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China