ISUTAMI BEARINGS
en
Linear Shaft
E-catalog
ISUTAMI BEARINGS

Linear Shaft

Linear Shaft
ISUTAMI linear shaft is widely used in packing machines, packing machines, filling machines, wrapping package machine, sealing machine, labeling machine, washing machine, drying machine, sterilization machine, strapping machine, machine, multi-function packaging machinery, packaging materials, packaging containers manufacturing machinery, and complete its auxiliary packaging machinery packaging operations.Solid shaft and hollow shaft and have a wide range of USES, in the actual work, but also a specific case of specific analysis, reasonable choice of section shape and size.
Linear Shaft
ISUTAMI linear shaft is widely used in packing machines, packing machines, filling machines, wrapping package machine, sealing machine, labeling machine, washing machine, drying machine, sterilization machine, strapping machine, machine, multi-function packaging machinery, packaging materials, packaging containers manufacturing machinery, and complete its auxiliary packaging machinery packaging operations.Solid shaft and hollow shaft and have a wide range of USES, in the actual work, but also a specific case of specific analysis, reasonable choice of section shape and size.

Linear Shaft Products


Linear Shaft Features

Assuming that the diameter of the outer circle is the same, the material is the same, and the heat treatment is the same, the bending and torsional resistance of the linear shaft is higher than that of the hollow shaft.

If the sectional area is the same, the material is the same, the heat treatment is the same, the hollow shaft bending and torsion resistance is higher.However, if the wall is too thin, although the inertia moment and bending section modulus are very high, for the case of bending moment, the compressive stress may cause local instability failure in the compression area.

The heat treatment conditions mentioned above have no effect on stiffness, but have an effect on strength.
If the diameter is the same, then whether bending, torsion or tension resistance, is stronger than hollow solid.
If the weight is the same, it depends on the specific shape of the section. A hollow shaft with a diameter of 100mm can also have higher bending resistance than a linear shaft with a diameter of 10mm if the wall thickness is well controlled.

Many ISUTAMI linear shaft are used in engineering, that is because the material selection is not purely based on strength, but on the so-called specific strength and specific stiffness.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China