ISUTAMI BEARINGS
Metric Single Split Shaft Collar
E-catalog
ISUTAMI BEARINGS

Metric Single Split Shaft Collar

Metric Single Split Shaft Collar
The metric single split shaft collar is a cylindrical mechanical part on the rotating shaft, which is an integral part of the sliding bearing.Generally speaking, the metric single split shaft collar and bearing block adopt interference fit, and adopt clearance fit with the shaft.The metric single split shaft collar is generally used with the bearing. The metric single split shaft collar is the sleeve, and the bearing is the part that can fix and reduce the friction coefficient of the load in the process of mechanical transmission.The common thing between the bush and the bearing is that both bear the load of the shaft.And the difference between the two is the overall structure of the shaft sleeve, rotation is the relative motion between the shaft and the shaft sleeve;While the bearing is split, the rotation is the relative movement of the inner and outer rings of the bearing itself.But in essence, the bush is actually a kind of sliding bearing.The bearing bush is equivalent to the outer ring of the sliding bearing. The bearing sleeve is integral and moves relative to the shaft, while the bearing bush is fragmentary and rotates relative to the shaft.
Metric Single Split Shaft Collar
The metric single split shaft collar is a cylindrical mechanical part on the rotating shaft, which is an integral part of the sliding bearing.Generally speaking, the metric single split shaft collar and bearing block adopt interference fit, and adopt clearance fit with the shaft.The metric single split shaft collar is generally used with the bearing. The metric single split shaft collar is the sleeve, and the bearing is the part that can fix and reduce the friction coefficient of the load in the process of mechanical transmission.The common thing between the bush and the bearing is that both bear the load of the shaft.And the difference between the two is the overall structure of the shaft sleeve, rotation is the relative motion between the shaft and the shaft sleeve;While the bearing is split, the rotation is the relative movement of the inner and outer rings of the bearing itself.But in essence, the bush is actually a kind of sliding bearing.The bearing bush is equivalent to the outer ring of the sliding bearing. The bearing sleeve is integral and moves relative to the shaft, while the bearing bush is fragmentary and rotates relative to the shaft.

Metric Single Split Shaft Collar Size Chart

Metric Single Split Shaft Collar

Part Bore (mm) O.D. (mm) Width (mm) Screw Weight (oz)
1MSC-03 3 16 9 M3 x 8 0.4
1MSC-04 4 16 9 M3 x 8 0.4
1MSC-05 5 16 9 M3 x 8 0.4
1MSC-06 6 16 9 M3 x 8 0.4
1MSC-07 7 18 9 M3 x 8 0.5
1MSC-08 8 18 9 M3 x 8 0.5
1MSC-09 9 24 9 M3 x 8 0.8
1MSC-10 10 24 9 M3 x 10 0.8
1MSC-12 12 28 11 M4 x 12 1.3
1MSC-13 13 30 11 M4 x 14 1.5
1MSC-14 14 30 11 M4 x 14 1.5
1MSC-15 15 34 13 M5 x 16 2.2
1MSC-16 16 34 13 M5 x 16 2.1
1MSC-17 17 36 13 M5 x 16 2.6
1MSC-18 18 36 13 M5 x 16 2.5
1MSC-19 19 40 15 M6 x 16 3.6
1MSC-20 20 40 15 M6 x 16 3.5
1MSC-21 21 42 15 M6 x 16 3.9
1MSC-22 22 42 15 M6 x 16 3.8
1MSC-23 23 45 15 M6 x 16 4.5
1MSC-25 25 45 15 M6 x 16 4.3
1MSC-26 26 48 15 M6 x 16 4.9
1MSC-30 30 54 15 M6 x 18 6.1
1MSC-35 35 57 15 M6 x 18 6.2
1MSC-36 36 57 15 M6 x 18 6.1
1MSC-40 40 60 15 M6 x 18 6
1MSC-42 42 73 19 M8 x 25 13.5
1MSC-45 45 73 19 M8 x 25 12.9
1MSC-48 48 78 19 M8 x 25 14.8
1MSC-50 50 78 19 M8 x 25 13.8
1MSC-54 54 82 19 M8 x 25 14.9
1MSC-55 55 82 19 M8 x 25 14.5
1MSC-60 60 88 19 M8 x 25 16.2
1MSC-65 65 93 19 M8 x 25 16.8
1MSC-70 70 98 19 M8 x 25 18.3
1MSC-75 75 103 19 M8 x 25 19.5
1MSC-80 80 108 19 M8 x 25 20.4

Metric Single Split Shaft Collar Features

According to the use of parts and conditions of use and environmental conditions to choose the size and precision of the specifications, with the appropriate automotive bearings is to ensure the life and reliability of the premise.The use position, the bearing is suitable to bear the radial load primarily the radial direction and the axial joint load, usually USES with two sets of bearings pairing, mainly should be used in the automobile front and rear wheel hub, the active cone gear, the differential, the reduction gear and so on the transmission position.Allowable speed: under the environment of correct installation and good lubrication, allowable speed is 0.3-0.5 times of the limit speed of automobile bearing.Under normal circumstances, 0.2 times the limit speed is the most appropriate.Strong stamping is not allowed when using and installing. The solution to the problem of defective bearing is that it is not allowed to directly hit the bearing with a hammer and transfer pressure through the rolling body.Use proper, accurate installation tools, use special tools whenever possible, and avoid cloth and staple materials at all costs.As far as possible to keep the bearings and the surrounding environment clean, automotive bearings are generally used sodium base grease even invisible to the naked eye smile dust into the bearings, will also increase the bearing wear, vibration and noise.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China