ISUTAMI BEARINGS
en
PHS Rod Ends
E-catalog
ISUTAMI BEARINGS

PHS Rod Ends

PHS Rod Ends
Rod ends bearing is a spherical sliding bearing, which is composed of an inner ring with a spherical sliding sphere contact surface, an inner ring with an inner sphere and an outer ring with an inner sphere, and can bear a large load.According to its different types and structures, it can bear the radial load, the axial load or the combined load in the radial direction.Generally used for low speed swing motion, but also in a certain Angle range for tilt motion, when the supporting shaft and shaft shell hole is not concentricity is large, still can work normally.Self-lubricating joint auxiliary bearing should be used in water conservancy, professional machinery and other industries.
PHS Rod Ends
Rod ends bearing is a spherical sliding bearing, which is composed of an inner ring with a spherical sliding sphere contact surface, an inner ring with an inner sphere and an outer ring with an inner sphere, and can bear a large load.According to its different types and structures, it can bear the radial load, the axial load or the combined load in the radial direction.Generally used for low speed swing motion, but also in a certain Angle range for tilt motion, when the supporting shaft and shaft shell hole is not concentricity is large, still can work normally.Self-lubricating joint auxiliary bearing should be used in water conservancy, professional machinery and other industries.

PHS Rod Ends Size Chart

Rod Ends PHS

Ends No. Dimensions Basic Load Rating α
Weight
(kg)
d B dk C1 d2 d3 h1 l3 l4 l5 l7 w d4 d5 Cr(KN) Cor(KN)
PHS5 5 8 11.1 6 16 M5*0.80 27 14 35 4 8 9 9 11 3.3 4.1 13 0.016
PHS6 6 9 12.7 6.75 18 M6*1.00 30 14 39 5 9 11 10 13 4.3 5.3 13 0.026
PHS8 8 12 15.8 9 22 M8*1.25 36 17 47 5 11 14 12.5 16 6.8 8.5 14 0.044
PHS10 10 14 19.1 10.5 26 M10*1.50 43 21 56 6.5 13 17 15 19 10 11 13 0.072
M10*1.25
PHS12 12 16 22.2 12 30 M12*1.75 50 24 65 6.5 15 19 17.5 22 13 14 13 0.108
M12*1.25
PHS14 14 19 25.4 13.5 34 M14*2.00 57 27 74 8 16 22 21 25 17 20 16 0.161
M14*1.50
PHS16 16 21 28.6 15 38 M16*2.00 64 33 83 8 17.5 24 22 27 21 25 15 0.225
M16*1.50
PHS18 18 23 31.8 16.5 42 M18*1.50 71 36 92 10 19.5 27 25 31 26 30 15 0.296
PHS20 20 25 34.9 18 46 M20*1.50 77 40 100 10 21.5 30 27.5 34 31 35 14 0.385
PHS22 22 28 38.1 20 50 M22*1.50 84 43 109 12 23 32 30 37 38 43 15 0.488
PHS25 25 31 42.9 22 60 M24*2.00 94 48 124 12 29.5 36 33.5 42 47 65 15 0.749
PHS28 28 35 47.6 25 66 M27*2.00 103 53 136 12 32.5 41 37 46 59 77 15 0.949
PHS30 30 37 50.8 25 70 M30*2.00 110 56 145 15 34 41 40 51 63 86 17 1.13
PHS35 35 43 57.2 28 76 M36*2.00 125 56 165 15 42 50 46 56 90 116 17 1.6

PHS Rod Ends Features

Rod ends bearings to check the appearance of bearings to determine whether they meet the standards we require.Rod ends bearings should be inspected under astigmatism lamps for appearance, cracks, etc.All kinds of mechanical scars, such as abrasion, scratch, compression, collision and so on, will cause poor bearing installation, causing off-load and stress concentration, resulting in the decline of rotary accuracy and service life.Rust, black leather and pitting, the latter two are easy to store water and dirt defects, most likely to develop into rust.And corrosion is the source of poor installation, early wear and fatigue, serious corrosion will make the bearing scrapped.All kinds of cracks, such as raw material cracks, forging cracks, heat treatment cracks and grinding cracks, etc., these cracks will become a stress concentration source and expand rapidly in the later running process of the bearing, causing the bearing fracture, which has a great impact on the service life and work safety of the bearing.As a matter of fact, for the important USES of Rod ends bearings, the bearing factory has conducted 100% magnetic or radiographic inspection on the components.Peeling and folding, these two kinds of defects local and matrix metal bonding is not strong, and the surrounding often exists decarbonization or poor carbon phenomenon, the material is easy to collapse, pressure concave or wear, on the life and precision of the bearing is very unfavorable.The riveting or welding quality of the cage, mainly observe whether the rivet head deviation, skew, relaxation, lack of meat, whether the welding position is correct, welding spot is too large or too small, whether the welding is not strong or excessive welding caused by the phenomenon of stuck rolling body.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China