ISUTAMI BEARINGS
en
UCPAPL200 Plastic Mounted Bearing
E-catalog
ISUTAMI BEARINGS

UCPAPL200 Plastic Mounted Bearing

UCPAPL200 Plastic Mounted Bearing
Plastic Mounted is widely used in medical, food and chemical machinery. Fully ensure the close coordination between the bearing and the bearing seat, prevent the bearing and the bearing seat will have impact during the vibration process, and the bearing seat will be subjected to fluctuating cyclic stress. Under certain special operating conditions, Plastic Mounted Bearing can obtain a longer life than conventional computing, especially under light load. These special operating conditions are the surface damage that may result when the rolling surface is effectively separated from and limited by a lubricating film. In fact, under ideal conditions, permanent bearing life is possible.
UCPAPL200 Plastic Mounted Bearing
Plastic Mounted is widely used in medical, food and chemical machinery. Fully ensure the close coordination between the bearing and the bearing seat, prevent the bearing and the bearing seat will have impact during the vibration process, and the bearing seat will be subjected to fluctuating cyclic stress. Under certain special operating conditions, Plastic Mounted Bearing can obtain a longer life than conventional computing, especially under light load. These special operating conditions are the surface damage that may result when the rolling surface is effectively separated from and limited by a lubricating film. In fact, under ideal conditions, permanent bearing life is possible.

UCPAPL200 Plastic Mounted Bearing Products

UCPAPL200 Plastic Mounted Bearing Size Chart

Plastic Mounted Bearing UCPAPL200

Bearing No. Bore Dia Boundary Dimensions(mm)
Housing Weight
(Kg)
Bull.fiss.
Bolt Size
in. mm a b h m w Bi n
UCPAPL201 1/2 12 33.3 34.5 66 50.8 72.8 31 12.7 0.13 M8
UCPAPL202 9/16  5/8 15 33.3 34.5 66 50.8 72.8 31 12.7 0.13 M8
UCPAPL203 11/16 17 33.3 34.5 66 50.8 72.8 31 12.7 0.13 M8
UCPAPL204 3/4 20 33.3 34.5 66 50.8 72.8 31 12.7 0.13 M8
UCPAPL205 16/16  7/18  15/16  1 25 36.5 39.5 735 50.8 76.2 34 14.3 0.15 M10
UCPAPL206 1-1/16  1-1/8  1-3/16  1-1/4 30 42.9 42.5 84 76.2 101 38.1 15.9 0.24 M10
UCPAPL207 1-1/4  1-5/16  1-3/8   1-7/16 35 47.6 47.5 95 82.6 110 42.9 17.5 0.28 M10
UCPAPL208 1-1/2  1-9/16 40 49.2 48 100.5 88.9 120 49.2 19 0.39 M12
UCPAPL209 1-5/8  1-11/16  1-3/4 45 54 54 107 95.3 124 49.2 19 0.47 M12
UCPAPL210 1-13/16  1-7/8  1-15/16  2 50 57.2 54 115 101.6 135 51.6 19 0.56 M16

UCPAPL200 Plastic Mounted Bearing Features

The lubricating oil used by Plastic Mounted Bearing always has a certain operating temperature. When the temperature is too high, it will deteriorate and lose its lubricating effect, making the Bearing burn because of the high temperature. In addition, the poor quality of the lubricating oil itself or the operation of the oil is not timely, will also cause bearing temperature rise or abnormal sound. The rotor of the running equipment must move and statically balance before it is Mounted, so the Plastic Mounted Bearing will not pose any problem. However, some rotors are corroded by the medium or worn by solid impurities in the process of operation, or the shaft is bent, which will lead to unbalanced centrifugal force. As a result, the bearing will be heated, vibrated, and the raceway will be seriously worn and even destroyed.

Plastic Mounted Bearing during operation, regular inspection by the regulation, if fever, noise, vibration, etc., to stop using the search reason, eliminate the fault, Bearing such as found serious fatigue spalling, oxidation corrosion, wear and tear of pit, crack, hardness reduced to HRC < 60, or when there is too much noise can't adjust, should be replaced in a timely manner. If the inspection, replacement is not timely, it will cause serious damage to the bearing or even the rotor, thus affecting the normal production. In addition, improper bearing disassembly and vibration caused by loose anchor bolts of equipment will also lead to bearing raceway and rolling body indentation and cracking of bearing inner and outer seat rings.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China