ISUTAMI BEARINGS
en
POS Rod Ends
E-catalog
ISUTAMI BEARINGS

POS Rod Ends

POS Rod Ends
Rod ends bearings are spherical sliding contact area, large inclination Angle, but also because most joint bearings take special processing methods, such as surface phosphating, galvanized, chrome or external sliding surface lining, gaskets, spraying, etc..Therefore has the big load ability and the anti-impact ability, and has the anti-corrosion, the wear-resisting, from adjusts the center, the lubrication is good or from the lubrication does not have the lubrication dirt pollution the characteristic, even if the installment dislocation can also work normally.Therefore, the joint bearings are widely used in low speed swing motion, tilt motion and rotation motion.Spherical plain bearings and rod end joint bearings have a variety of designs and have different combinations of sliding contact surfaces.Each design and combination has unique properties that make it particularly suitable for certain applications.
POS Rod Ends
Rod ends bearings are spherical sliding contact area, large inclination Angle, but also because most joint bearings take special processing methods, such as surface phosphating, galvanized, chrome or external sliding surface lining, gaskets, spraying, etc..Therefore has the big load ability and the anti-impact ability, and has the anti-corrosion, the wear-resisting, from adjusts the center, the lubrication is good or from the lubrication does not have the lubrication dirt pollution the characteristic, even if the installment dislocation can also work normally.Therefore, the joint bearings are widely used in low speed swing motion, tilt motion and rotation motion.Spherical plain bearings and rod end joint bearings have a variety of designs and have different combinations of sliding contact surfaces.Each design and combination has unique properties that make it particularly suitable for certain applications.

POS Rod Ends Size Chart

Rod Ends POS

Ends No. Dimensions Basic Load Rating α
Weight
(kg)
d B dk C1 d2 d3 h l1 l2 l7 Cr(KN) Cor(KN)
POS5 5 8 11.1 6 18 M5*0.80 33 20 41 * 3.3 3.9 13 0.013
POS6 6 9 12.7 6.75 20 M6*1.00 36 22 45 * 4.3 5.2 13 0.02
POS8 8 12 15.8 9 24 M8*1.25 42 25 53 * 6.8 8.2 14 0.038
POS10 10 14 19.1 10.5 28 M10*1.50 48 29 61 * 10 15 13 0.071
M10*1.25
POS12 12 16 22.2 12 32 M12*1.75 54 33 69 * 13 19 13 0.12
M12*1.25
POS14 14 19 25.4 13.5 36 M14*2.00 60 36 77 * 17 24 16 0.17
M14*1.50
POS16 16 21 28.6 15 42 M16*2.00 66 40 85 * 21 29 15 0.23
M16*1.50
POS18 18 23 31.8 16.5 46 M18*1.50 72 44 93 23 26 34 15 0.31
POS20 20 25 34.9 18 50 M20*1.50 78 47 101 25 31 40 14 0.4
POS22 22 28 38.1 20 54 M22*1.50 84 51 109 27 38 50 15 0.49
POS25 25 31 42.9 22 60 M24*2.00 94 58 124 29 47 57 15 0.65
POS28 28 35 47.6 25 66 M27*2.00 103 62 136 33 59 77 15 0.949
POS30 30 37 50.8 25 70 M30*2.00 110 66 145 39 63 77 17 0.87
POS35 35 43 57.2 28 80 M26*2.00 125 77 165 42 90 116 17 1.1

POS Rod Ends Features

Rod ends bearing outer packing is clear, usually has its own professional design external packaging design, and arrange production with the conditions of the factory production, so the packing is very clear from the line to the color piece, unequivocally, on the part of the packaging and specifically to protect their intellectual property unique design.Whether the steel seal is clear, bearing body will be printed with the brand name, label, etc.The font is very small, is the factory to produce most of the use of steel printing technology, and in the heat treatment before the pressure, so the font is small, but deep, very clear.But the typeface is fuzzy, because the printing technology is rough, the typeface floats in the surface, some even may easily wipe with the hand.If there is any noise, the left hand holds the inner sleeve of the bearing and the right hand rotates the jacket to hear if there is any noise.Due to the backward production conditions, manual workshop operation, in the production process will inevitably be mixed with sand and other impurities, hidden in the bearing body, so in the rotation of the noise will be issued.This is the biggest difference from strictly enforcing production standards and operating with machines.Whether the surface is muddy with oil, which should be paid special attention to when buying Rod ends bearings.As the anti-rust technology on the bearing body rust prevention treatment is very easy to leave a thick grease, stick in the hand thick, almost can't see the traces of anti-rust oil, bearing smell has a taste, must be under the anti-rust oil, just can't see it.Whether the chamfering is uniform or not, the so-called chamfering of bearing, that is, the intersection of transverse and vertical surfaces, is not satisfactory in these corner parts due to the limitations of production technology.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China