ISUTAMI BEARINGS
en
SA-C & SA-ET-2RS Rod Ends
E-catalog
ISUTAMI BEARINGS

SA-C & SA-ET-2RS Rod Ends

SA-C & SA-ET-2RS Rod Ends
Rod ends bearings are spherical sliding contact area, large inclination Angle, but also because most joint bearings take special processing methods, such as surface phosphating, galvanized, chrome or external sliding surface lining, gaskets, spraying, etc..Therefore has the big load ability and the anti-impact ability, and has the anti-corrosion, the wear-resisting, from adjusts the center, the lubrication is good or from the lubrication does not have the lubrication dirt pollution the characteristic, even if the installment dislocation can also work normally.Therefore, the joint bearings are widely used in low speed swing motion, tilt motion and rotation motion.Spherical plain bearings and rod end joint bearings have a variety of designs and have different combinations of sliding contact surfaces.Each design and combination has unique properties that make it particularly suitable for certain applications.
SA-C & SA-ET-2RS Rod Ends
Rod ends bearings are spherical sliding contact area, large inclination Angle, but also because most joint bearings take special processing methods, such as surface phosphating, galvanized, chrome or external sliding surface lining, gaskets, spraying, etc..Therefore has the big load ability and the anti-impact ability, and has the anti-corrosion, the wear-resisting, from adjusts the center, the lubrication is good or from the lubrication does not have the lubrication dirt pollution the characteristic, even if the installment dislocation can also work normally.Therefore, the joint bearings are widely used in low speed swing motion, tilt motion and rotation motion.Spherical plain bearings and rod end joint bearings have a variety of designs and have different combinations of sliding contact surfaces.Each design and combination has unique properties that make it particularly suitable for certain applications.

SA-C & SA-ET-2RS Rod Ends Size Chart

Rod Ends SA-C & SA-ET-2RS

Ends No. Dimensions Basic Load Rating α
Weight
(kg)
d B dk C1 d2 d3 h l1 l2 l7 Cr(KN) Cor(KN)
SA5C 5 6 10 4.5 21 M5*0.80 36 16 46.5 11.5 3.6 3.9 13 0.017
SA6C 6 6 10 4.5 21 M6*1.00 36 16 46.5 11.5 3.6 5.5 13 0.017
SA8C 8 8 13 6.5 24 M8*1.25 42 21 54 13 5.8 10 15 0.029
SA10C 10 9 16 7.5 29 M10*1.50 48 26 62.5 15.5 8.6 16 12 0.05
SA12C 12 10 18 8.5 34 M12*1.75 54 28 71 18 11 23 10 0.066
SA15C 15 12 22 10.5 40 M14*2.00 63 34 83 21 18 32 8 0.12
SA15ET-2RS 25
SA17C 17 14 25 11.5 46 M16*2.00 69 36 92 24 22 44 10 0.19
SA17ET-2RS 32
SA20C 20 16 29 13.5 53 M20*1.50 78 43 105 25.5 31 60 9 0.31
SA20ET-2RS 45
SA25C 25 20 35.5 18 64 M24*2.00 94 53 126 31 51 83 7 0.56
SA25ET-2RS 85
SA30C 30 22 40.7 20 73 M30*2.00 110 65 142 35.5 65 110 6 0.89
SA30ET-2RS 110
SA35ET-2RS 35 25 47 22 82 M36*3.00 140 82 181 41 140 146 6 1.4
SA40ET-2RS 40 28 53 24 92 M39*3.00 150 86 196 47 175 180 7 1.8
SA45ET-2RS 45 32 60 28 102 M42*3.00 163 92 214 52 225 240 7 2.5
SA50ET-2RS 50 35 66 31 112 M45*3.00 185 104 241 60 275 290 6 3.6
SA60ET-2RS 60 44 80 39 135 M52*3.00 210 115 278 75.5 430 450 6 5.7
SA70ET-2RS 70 49 92 43 160 M56*4.00 235 125 315 95 550 610 6 7.9
SA80ET-2RS 80 55 105 48 180 M64*4.00 270 140 360 106 705 750 6 12

SA-C & SA-ET-2RS Rod Ends Features

Rod ends bearing is easy to process and manufacture. Because of the middle adjustable link, the tolerance band of machining size of parts can be greatly relaxed, and the rejection rate also drops exponentially.At the same time, it can reduce the precision requirement of the machine tool and make it possible to process the high precision bearing on the common precision machine tool.The technical level of workers can also be appropriately reduced, with certain economic benefits.It is easy to assemble and install. After the outer ring is made into a split type, the radial clearance of the bearing can be adjusted to the ideal value conveniently, and the higher accuracy can be achieved without using the grouping assembly method.The installation on the shaft is also very convenient, no need to attach other adjustment device, simplify the structure of the whole machine.The bearing capacity can be increased by using double row rolling body, and it can bear bidirectional axial force.Reduce the type of parts, the outer ring made of split, can make the rolling body on the fairway full, this can save the cage.At the same time, the move can also reduce the process, improve the carrying capacity, it can be said to kill two birds with one stone.It is easy to maintain and repair. When the bearing clearance is out of tolerance due to wear and tear, the clearance can be reduced and the original accuracy can be restored by properly reducing the thickness of the spacer, thus extending the service life of the bearing.In addition, when only individual components abnormal damage, but also to replace the damaged parts of the method to repair the bearing, or even the whole old as new, can yet be regarded as a good way of careful calculation.Rod ends bearing introduced here has the advantages of novel conception, reasonable structure, convenient assembly and easy maintenance.In particular, the problem of adjusting the clearance of the bearing can be easily solved by changing the outer ring of the bearing from integral type to axial split-body combination type.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China