ISUTAMI BEARINGS
en
SAAK Series Pillow Block Bearing Units
E-catalog
ISUTAMI BEARINGS

SAAK Series Pillow Block Bearing Units

SAAK Series Pillow Block Bearing Units
ISUTAMI SAAK pillow block bearing unit is a mounted bearing combined with a one-piece 2-bolt cast iron housing. Each side of the housing has an ear which is reinforced and with a bolt on it. The spherical bearing inside the case is a kind of ball bearing, usually made of bearing steel material. The bottom of the housing can be solid or hollow type. The bearing combination can be directly mounted to the body of machines by two bolts. It has a self-aligning function, which can be used to replenish grease. The installation and use of this bearing unit is simple.

SAAK series pillow block bearing units are light duty, with a narrow inner ring and an eccentric collar lock to secure the shaft. The inner bore diameter ranges from 20mm to 2 inches. In addition, the SAAK housing is a low shaft height one.

ISUTAMI SAAK series bearing units have the following features:

1. Long service life

Spherical ball bearings with housings are usually used in harsh working environments, such as dirt, dust, moisture and high temperatures, and the grease inside the bearing will deteriorate in a short period of time. Therefore, it is necessary to re-lubricate the bearing with a proper time interval and replace the deteriorated grease with fresh grease. SAAK ball bearings are equipped with grease nipples that can be re-lubricated to ensure perfect performance and long life in any working environment. The oil groove on the outer ring can better ensure that the grease can be smoothly injected into the bearing from the nozzle.

2.Special heat treatment of the inner ring

The inner ring channel and its surrounding hardened part are normally quenched, the convex of inner ring are high temperature local tempering to maintain toughness and impact resistance. After local high temperature tempering around the inner ring screw holes, the bearing obtains better performance, which prevents the screw from loosening during the running process, and the screw is tightened tightly without causing the inner ring to burst.

3. Unique design to prevent rotation of the insert bearing
The outer ring of the bearing is equipped with a unique stop pin that allows the bearing to self-align and prevent the outer ring from rotating, resulting in a longer bearing life.

4. Bearings and housings can be interchanged
Bearings and housings are precision machined, bearings and housings are fully interchangeable, and bearings can be easily replaced at any time.

ISUTAMI SAAK with spherical outer bearings can work in harsh environments. The bearing housing is generally with tight structure, reliable in sealing, and easy to assemble and disassemble. The product is widely applied in agriculture, textile, mining, metallurgy, chemical, transportation machinery and other industries.
SAAK Series Pillow Block Bearing Units
ISUTAMI SAAK pillow block bearing unit is a mounted bearing combined with a one-piece 2-bolt cast iron housing. Each side of the housing has an ear which is reinforced and with a bolt on it. The spherical bearing inside the case is a kind of ball bearing, usually made of bearing steel material. The bottom of the housing can be solid or hollow type. The bearing combination can be directly mounted to the body of machines by two bolts. It has a self-aligning function, which can be used to replenish grease. The installation and use of this bearing unit is simple.

SAAK series pillow block bearing units are light duty, with a narrow inner ring and an eccentric collar lock to secure the shaft. The inner bore diameter ranges from 20mm to 2 inches. In addition, the SAAK housing is a low shaft height one.

ISUTAMI SAAK series bearing units have the following features:

1. Long service life

Spherical ball bearings with housings are usually used in harsh working environments, such as dirt, dust, moisture and high temperatures, and the grease inside the bearing will deteriorate in a short period of time. Therefore, it is necessary to re-lubricate the bearing with a proper time interval and replace the deteriorated grease with fresh grease. SAAK ball bearings are equipped with grease nipples that can be re-lubricated to ensure perfect performance and long life in any working environment. The oil groove on the outer ring can better ensure that the grease can be smoothly injected into the bearing from the nozzle.

2.Special heat treatment of the inner ring

The inner ring channel and its surrounding hardened part are normally quenched, the convex of inner ring are high temperature local tempering to maintain toughness and impact resistance. After local high temperature tempering around the inner ring screw holes, the bearing obtains better performance, which prevents the screw from loosening during the running process, and the screw is tightened tightly without causing the inner ring to burst.

3. Unique design to prevent rotation of the insert bearing
The outer ring of the bearing is equipped with a unique stop pin that allows the bearing to self-align and prevent the outer ring from rotating, resulting in a longer bearing life.

4. Bearings and housings can be interchanged
Bearings and housings are precision machined, bearings and housings are fully interchangeable, and bearings can be easily replaced at any time.

ISUTAMI SAAK with spherical outer bearings can work in harsh environments. The bearing housing is generally with tight structure, reliable in sealing, and easy to assemble and disassemble. The product is widely applied in agriculture, textile, mining, metallurgy, chemical, transportation machinery and other industries.

SAAK Series Pillow Block Bearing Units Size Chart

Pillow Block Bearing Units SAAK

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm h a e b s1 s2 g w Bi n
SAAK204 SA204 AK204 - 20 31.8 127 96 31 13 16 14 63 31 7 M10 0.5
SAAK204-12 SA204-12 AK204 3/4 - 31.8 127 96 31 13 16 14 63 31 7 3/8 0.5
SAAK205 SA205 AK205 - 25 33.3 140 105 38 13 19 15 66.5 31 7.5 M10 0.7
SAAK205-14 SA205-14 AK205 7/8 - 33.3 140 105 38 13 19 15 66.5 31 7.5 3/8 0.7
SAAK205-15 SA205-15 AK205 15/16 - 33.3 140 105 38 13 19 15 66.5 31 7.5 3/8 0.7
SAAK205-16 SA205-16 AK205 1 - 33.3 140 105 38 13 19 15 66.5 31 7.5 3/8 0.7
SAAK206 SA206 AK206 - 30 36.7 160 121 44 14 19 16 79 35.7 8 M14 1.2
SAAK206-17 SA206-17 AK206 1-1/16 - 36.7 160 121 44 14 19 16 79 35.7 8 1/2 1.2
SAAK206-18 SA206-18 AK206 1-1/8 - 36.7 160 121 44 14 19 16 79 35.7 8 1/2 1.2
SAAK206-19 SA206-19 AK206 1-3/16 - 36.7 160 121 44 14 19 16 79 35.7 8 1/2 1.2
SAAK206-20 SA206-20 AK206 1-1/4 - 36.7 160 121 44 14 19 16 79 35.7 8 1/2 1.2
SAAK207 SA207 AK207 - 35 46 167 127 48 15 19 17 91 38.9 8.5 M14 1.4
SAAK207-20 SA207-20 AK207 1-1/4 - 46 167 127 48 15 19 17 91 38.9 8.5 1/2 1.4
SAAK207-21 SA207-21 AK207 1-5/16 - 46 167 127 48 15 19 17 91 38.9 8.5 1/2 1.4
SAAK207-22 SA207-22 AK207 1-3/8 - 46 167 127 48 15 19 17 91 38.9 8.5 1/2 1.4
SAAK207-23 SA207-23 AK207 1-7/16 - 46 167 127 48 15 19 17 91 38.9 8.5 1/2 1.4
SAAK208 SA208 AK208 - 40 49.2 180 136 52 15 21 18 98 43.7 9 M14 1.9
SAAK208-24 SA208-24 AK208 1-1/2 - 49.2 180 136 52 15 21 18 98 43.7 9 1/2 1.9
SAAK208-25 SA208-25 AK208 1-9/16 - 49.2 180 136 52 15 21 18 98 43.7 9 1/2 1.9
SAAK209 SA209 AK209 - 45 52.4 189 146 54 15 21 20 105 43.7 9.5 M14 2.1
SAAK209-26 SA209-26 AK209 1-5/8 - 52.4 189 146 54 15 21 20 105 43.7 9.5 1/2 2.1
SAAK209-27 SA209-27 AK209 1-11/16 - 52.4 189 146 54 15 21 20 105 43.7 9.5 1/2 2.1
SAAK209-28 SA209-28 AK209 1-3/4 - 52.4 189 146 54 15 21 20 105 43.7 9.5 1/2 2.1
SAAK210 SA210 AK210 - 50 55.6 204 159 57 19 22 21 111.5 43.7 10 M16 2.3
SAAK210-30 SA210-30 AK210 1-7/8 - 55.6 204 159 57 19 22 21 111.5 43.7 10 5/8 2.3
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China