ISUTAMI BEARINGS
SAFL Series 2 Bolt Flange Mounted Bearings Units
E-catalog
ISUTAMI BEARINGS

SAFL Series 2 Bolt Flange Mounted Bearings Units

SAFL Series 2 Bolt Flange Mounted Bearings Units
ISUTAMI SAFL 2-bolt flange mounted bearing unit, also known as SAFL 2-bolt diamond flanged housing with bearing, mainly consists of a case with flange and an inserted spherical ball bearing. The case of bearing unit has flanges on both sides of its body, and each flange has a precisely ground bolt hole for fixing the entire unit. The entire bearing housing unit is like a diamond. The material of SAFL housing is mainly cast iron, thermoplastic or stainless steel. And the surface of cast iron material is generally painted, galvanized or nickel plated. The inner race of the housing is generally finely ground and tightly fitted with the smooth spherical outer ring of the spherical ball bearing. There is a grease nipple near one of the flanges on the bearing housing, which can be filled with grease at an suitable time to lubricate the internal bearing and extend the service life of the product. The built-in bearing is a ball bearing, mainly made of bearing steel or chrome steel. The inner ring of SAFL series bearing has a convex portion on one side, and two set screws distributed on this part are at a position of 120°for fixing the round shaft.

SAFL series mounted bearing unit is light duty, with a narrow inner ring and it is a eccentric collar lock type. The diameter of the bearing inner bore ranges from 1/2 inch up to 2 inches, matching the round shaft. The dimensions of the inner ring and housing in the bearing unit are divided into inch and metric. The housing of SAFL series product can be in solid or hollow type. The hollow type are made of less material, is lighter in weight and cheaper. However, the solid housing is more stable after installation. Consumers can purchase the right products according to the specific environments and requirements.

ISUTAMI 2-bolt flanged housing with bearing is applied in a wide range of applications and can be operated for longer time in harsh environments. Its structure is very compact, its sealing is good, and it is very easy to disassemble and install. This product is generally applied in industries such as agriculture, textiles as well as conveying systems, etc.
SAFL Series 2 Bolt Flange Mounted Bearings Units
ISUTAMI SAFL 2-bolt flange mounted bearing unit, also known as SAFL 2-bolt diamond flanged housing with bearing, mainly consists of a case with flange and an inserted spherical ball bearing. The case of bearing unit has flanges on both sides of its body, and each flange has a precisely ground bolt hole for fixing the entire unit. The entire bearing housing unit is like a diamond. The material of SAFL housing is mainly cast iron, thermoplastic or stainless steel. And the surface of cast iron material is generally painted, galvanized or nickel plated. The inner race of the housing is generally finely ground and tightly fitted with the smooth spherical outer ring of the spherical ball bearing. There is a grease nipple near one of the flanges on the bearing housing, which can be filled with grease at an suitable time to lubricate the internal bearing and extend the service life of the product. The built-in bearing is a ball bearing, mainly made of bearing steel or chrome steel. The inner ring of SAFL series bearing has a convex portion on one side, and two set screws distributed on this part are at a position of 120°for fixing the round shaft.

SAFL series mounted bearing unit is light duty, with a narrow inner ring and it is a eccentric collar lock type. The diameter of the bearing inner bore ranges from 1/2 inch up to 2 inches, matching the round shaft. The dimensions of the inner ring and housing in the bearing unit are divided into inch and metric. The housing of SAFL series product can be in solid or hollow type. The hollow type are made of less material, is lighter in weight and cheaper. However, the solid housing is more stable after installation. Consumers can purchase the right products according to the specific environments and requirements.

ISUTAMI 2-bolt flanged housing with bearing is applied in a wide range of applications and can be operated for longer time in harsh environments. Its structure is very compact, its sealing is good, and it is very easy to disassemble and install. This product is generally applied in industries such as agriculture, textiles as well as conveying systems, etc.

SAFL Series 2 Bolt Flange Mounted Bearings Units Size Chart

2 Bolt Flange Mounted Bearings Units SAFL

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm a e i g l s b z Bi n
SAFL201-8 SA201-8 FL203 1/2 - 99 76 13 10 22 12 54 35.6 28.6 6 3/8 0.41
SAFL202-10 SA202-10 FL203 5/8 - 99 76 13 10 22 12 54 35.6 28.6 6 3/8 0.41
SAFL204 SA204 FL204 - 20 113 90 15 11 25.5 12 60 39 31 7 M10 0.43
SAFL204-12 SA204-12 FL204 3/4 - 113 90 15 11 25.5 12 60 39 31 7 3/8 0.43
SAFL205 SA205 FL205 - 25 130 99 16 13 27 16 68 39.5 31 7.5 M14 0.53
SAFL205-14 SA205-14 FL205 7/8 - 130 99 16 13 27 16 68 39.5 31 7.5 1/2 0.53
SAFL205-15 SA205-15 FL205 15/16 - 130 99 16 13 27 16 68 39.5 31 7.5 1/2 0.53
SAFL205-16 SA205-16 FL205 1 - 130 99 16 13 27 16 68 39.5 31 7.5 1/2 0.53
SAFL206 SA206 FL206 - 30 148 117 18 13 31 16 80 45.7 35.7 8 M14 0.84
SAFL206-17 SA206-17 FL206 1-1/16 - 148 117 18 13 31 16 80 45.7 35.7 8 1/2 0.84
SAFL206-18 SA206-18 FL206 1-1/8 - 148 117 18 13 31 16 80 45.7 35.7 8 1/2 0.84
SAFL206-19 SA206-19 FL206 1-3/16 - 148 117 18 13 31 16 80 45.7 35.7 8 1/2 0.84
SAFL206-20 SA206-20 FL206 1-1/4 - 148 117 18 13 31 16 80 45.7 35.7 8 1/2 0.84
SAFL207 SA207 FL207 - 35 161 130 19 15 34 16 90 49.4 38.9 8.5 M14 1.26
SAFL207-20 SA207-20 FL207 1-1/4 - 161 130 19 15 34 16 90 49.4 38.9 8.5 1/2 1.26
SAFL207-21 SA207-21 FL207 1-5/16 - 161 130 19 15 34 16 90 49.4 38.9 8.5 1/2 1.26
SAFL207-22 SA207-22 FL207 1-3/8 - 161 130 19 15 34 16 90 49.4 38.9 8.5 1/2 1.26
SAFL207-23 SA207-23 FL207 1-7/16 - 161 130 19 15 34 16 90 49.4 38.9 8.5 1/2 1.26
SAFL208 SA208 FL208 - 40 175 144 21 15 36 16 100 55.7 43.7 9 M14 1.58
SAFL208-24 SA208-24 FL208 1-1/2 - 175 144 21 15 36 16 100 55.7 43.7 9 1/2 1.58
SAFL208-25 SA208-25 FL208 1-9/16 - 175 144 21 15 36 16 100 55.7 43.7 9 1/2 1.58
SAFL209 SA209 FL209 - 45 188 148 22 16 38 19 108 56.2 43.7 9.5 M16 2
SAFL209-26 SA209-26 FL209 1-5/8 - 188 148 22 16 38 19 108 56.2 43.7 9.5 5/8 2
SAFL209-27 SA209-27 FL209 1-11/16 - 188 148 22 16 38 19 108 56.2 43.7 9.5 5/8 2
SAFL209-28 SA209-28 FL209 1-3/4 - 188 148 22 16 38 19 108 56.2 43.7 9.5 5/8 2
SAFL210 SA210 FL210 - 50 197 157 22 16 40 19 116 55.7 43.7 10 M16 2.25
SAFL210-30 SA210-30 FL210 1-7/8 - 197 157 22 16 40 19 116 55.7 43.7 10 5/8 2.25
SAFL210-31 SA210-31 FL210 1-15/16 - 197 157 22 16 40 19 116 55.7 43.7 10 5/8 2.25
SAFL210-32 SA210-32 FL210 2 - 197 157 22 16 40 19 116 55.7 43.7 10 5/8 2.25
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China