ISUTAMI BEARINGS
en
SAPF Series 3 Bolt Flange Mounted Units Pressed Steel
E-catalog
ISUTAMI BEARINGS

SAPF Series 3 Bolt Flange Mounted Units Pressed Steel

SAPF Series 3 Bolt Flange Mounted Units Pressed Steel
ISUTAMI SAPF pressed steel round flange mounted unit, also known as ISUTAMI SAPF 3-bolt pressed steel round flange mounted bearing unit, consisting of two main components: a flange stamped steel housing and a built-in spherical bearing. SA means that the unit uses SA200 series ball bearings, and PF is the code name for the bearing housing. The housing of SAPF bearing unit is a round flange housing made of low carbon pressed steel and galvanized on the surface of the material, so the housing has an anti-corrosion function. Three square bolt holes with a pitch of 120°are evenly distributed on the circular flange. These bolt holes are used to mount the entire mounted unit. The spherical bearing inside the bearing housing is a rolling ball one, which is mainly to reduce the friction of the transmission equipment. There is a dust-proof rubber race on each side of the bearing. In addition, the bearing unit is pre-lubricated, with a grease fitting in half and a grease groove in half.

ISUTAMI SAPF 3-bolt pressed steel round flange mounted unit has a narrow inner ring and its inner ring is an eccentric collar locking type. The bearing unit is light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 1-15/16 inches. The total diameter of the SAPF bearing unit (a) ranges from 90 mm to 156 mm; the diameter without the flange portion (f) ranges from 49 mm to 102 mm, and the side length of the bolt holes on the flange (s) is 7 mm, 9 mm, 10 mm or 13 mm; the bolt size range is 1/2 inch - M8; the length of the entire unit (Bi) ranges from 28.6 mm to 43.7 mm. In addition, SAPF 3-bolt pressed steel flange mounted bearing unit has an overall weight range of 0.35 kg to 2 kgs.

ISUTAMI SAPF pressed steel round flange mounted unit, is easy to assemble and disassemble, has a long service life under certain conditions, and is used in some specific machinery and equipment. ISUTAMI can also provide a 4-bolt round flange mounted unit, and the 4-bolt product is more stable after installation. In addition, we can design and manufacture other sizes of 3-bolt or 4-bolt pressed steel round flange mounted units for customers.
SAPF Series 3 Bolt Flange Mounted Units Pressed Steel
ISUTAMI SAPF pressed steel round flange mounted unit, also known as ISUTAMI SAPF 3-bolt pressed steel round flange mounted bearing unit, consisting of two main components: a flange stamped steel housing and a built-in spherical bearing. SA means that the unit uses SA200 series ball bearings, and PF is the code name for the bearing housing. The housing of SAPF bearing unit is a round flange housing made of low carbon pressed steel and galvanized on the surface of the material, so the housing has an anti-corrosion function. Three square bolt holes with a pitch of 120°are evenly distributed on the circular flange. These bolt holes are used to mount the entire mounted unit. The spherical bearing inside the bearing housing is a rolling ball one, which is mainly to reduce the friction of the transmission equipment. There is a dust-proof rubber race on each side of the bearing. In addition, the bearing unit is pre-lubricated, with a grease fitting in half and a grease groove in half.

ISUTAMI SAPF 3-bolt pressed steel round flange mounted unit has a narrow inner ring and its inner ring is an eccentric collar locking type. The bearing unit is light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 1-15/16 inches. The total diameter of the SAPF bearing unit (a) ranges from 90 mm to 156 mm; the diameter without the flange portion (f) ranges from 49 mm to 102 mm, and the side length of the bolt holes on the flange (s) is 7 mm, 9 mm, 10 mm or 13 mm; the bolt size range is 1/2 inch - M8; the length of the entire unit (Bi) ranges from 28.6 mm to 43.7 mm. In addition, SAPF 3-bolt pressed steel flange mounted bearing unit has an overall weight range of 0.35 kg to 2 kgs.

ISUTAMI SAPF pressed steel round flange mounted unit, is easy to assemble and disassemble, has a long service life under certain conditions, and is used in some specific machinery and equipment. ISUTAMI can also provide a 4-bolt round flange mounted unit, and the 4-bolt product is more stable after installation. In addition, we can design and manufacture other sizes of 3-bolt or 4-bolt pressed steel round flange mounted units for customers.

SAPF Series 3 Bolt Flange Mounted Units Pressed Steel Size Chart

2 Bolt Flange Mounted Units Pressed Steel SAPF

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm a e g c s f Bi n W
SAPF210-31 SA210-31 PF210 1-15/16 - 156 127 3.8 22 13 102 43.7 10.0 69.9 1/2 2.00
SAPF210-32 SA210-32 PF210 2 - 156 127 3.8 22 13 102 43.7 10.0 69.9 1/2 2.00
SAPF209-28 SA209-28 PF209 1-3/4 - 149 121 3.4 22 13 97 43.7 9.5 63.5 1/2 1.70
SAPF210 SA210 PF210 - 50 156 127 3.8 22 13 102 43.7 10.0 69.9 M14 2.00
SAPF210-30 SA210-30 PF210 1-7/8 - 156 127 3.8 22 13 102 43.7 10.0 69.9 1/2 2.00
SAPF209 SA209 PF209 - 45 149 121 3.4 22 13 97 43.7 9.5 63.5 M14 1.70
SAPF209-26 SA209-26 PF209 1-5/8 - 149 121 3.4 22 13 97 43.7 9.5 63.5 1/2 1.70
SAPF209-27 SA209-27 PF209 1-11/16 - 149 121 3.4 22 13 97 43.7 9.5 63.5 1/2 1.70
SAPF208 SA208 PF208 - 40 148 119 3.4 21 13 90 43.7 9.0 60.4 M14 1.30
SAPF208-24 SA208-24 PF208 1-1/2 - 148 119 3.4 21 13 90 43.7 9.0 60.4 1/2 1.30
SAPF208-25 SA208-25 PF208 1-9/16 - 148 119 3.4 21 13 90 43.7 9.0 60.4 1/2 1.30
SAPF207-21 SA207-21 PF207 1-5/16 - 122 100 2.6 19 10 81 38.9 8.5 56.6 3/8 0.84
SAPF207-22 SA207-22 PF207 1-3/8 - 122 100 2.6 19 10 81 38.9 8.5 56.6 3/8 0.84
SAPF207-23 SA207-23 PF207 1-7/16 - 122 100 2.6 19 10 81 38.9 8.5 56.6 3/8 0.84
SAPF206-20 SA206-20 PF206 1-1/4 - 113 90 2.6 17 10 71 35.7 8.0 44.5 3/8 0.68
SAPF207 SA207 PF207 - 35 122 100 2.6 19 10 81 38.9 8.5 56.6 M10 0.84
SAPF207-20 SA207-20 PF207 1-1/4 - 122 100 2.6 19 10 81 38.9 8.5 56.6 3/8 0.84
SAPF206-17 SA206-17 PF206 1-1/16 - 113 90 2.6 17 10 71 35.7 8.0 44.5 3/8 0.68
SAPF206-18 SA206-18 PF206 1-1/8 - 113 90 2.6 17 10 71 35.7 8.0 44.5 3/8 0.68
SAPF206-19 SA206-19 PF206 1-3/16 - 113 90 2.6 17 10 71 35.7 8.0 44.5 3/8 0.68
SAPF205-15 SA205-15 PF205 15/16 - 95 76 2.1 17 9 66 31.0 7.5 38.1 5/16 0.40
SAPF205-16 SA205-16 PF205 1 - 95 76 2.1 17 9 66 31.0 7.5 38.1 5/16 0.40
SAPF206 SA206 PF206 - 30 113 90 2.6 17 10 71 35.7 8.0 44.5 M10 0.68
SAPF204-12 SA204-12 PF204 3/4 - 90 71 2.1 16 9 56 31.0 7.0 32.0 5/16 0.35
SAPF205 SA205 PF205 - 25 95 76 2.1 17 9 66 31.0 7.5 38.1 M8 0.40
SAPF205-14 SA205-14 PF205 7/8 - 95 76 2.1 17 9 66 31.0 7.5 38.1 5/16 0.40
SAPF201-8 SA201-8 PF203 1/2 - 81 64 2 14 7 49 28.6 6.0 28.6 5/16 0.31
SAPF202-10 SA202-10 PF203 5/8 - 81 64 2 14 7 49 28.6 6.0 28.6 5/16 0.31
SAPF204 SA204 PF204 - 20 90 71 2.1 16 9 56 31.0 7.0 32.0 M8 0.35
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China