ISUTAMI BEARINGS
en
SAPFL Series Round Flange Mounted Unit Pressed Steel
E-catalog
ISUTAMI BEARINGS

SAPFL Series Round Flange Mounted Unit Pressed Steel

SAPFL Series Round Flange Mounted Unit Pressed Steel
ISUTAMI SAPFL 2-bolt pressed steel flange mounted unit, also known as ISUTAMI SAPFL 2-bolt diamond pressed steel flange mounted unit, which is mainly composed of PFL200 series pressed steel housing and SA200 series insert spherical ball bearing . The bearing housing of the SBPFL mounted unit is a diamond-shaped flange type, made of low carbon steel material and galvanized on the surface for superior corrosion resistance. The flanges on both sides of the housing have a square mounting bolt hole with the side length (s) of 9 mm or 10 mm and a corresponding bolt size range of 3/8 inch - M8. A spherical bearing is mounted inside the bearing housing, which is mainly made of bearing steel material. One side of the inner ring of the bearing has an extended part, and two set screws are on this part for mounting the round shaft.

The inner ring of ISUTAMI SAPFL 2-bolt diamond pressed steel flange mounted unit is a narrow one as well as a set screw locking type. The entire bearing unit is light duty. The diameter of the round shaft that fits its inner ring ranges from 20 mm to 1-5/16 inches. The length of the SAPFL mounted bearing unit (a) ranges from 81 mm to 125 mm; the overall width (b) ranges from 59 mm to 94 mm, and the length between the center points of two bolt holes (e) ranges from 64 mm to 100 mm. The thickness of the unit (Bi) ranges from 28.6 mm to 38.9 mm. In addition, SAPFL 2 bolted pressed steel flange mounted units have an overall weight range of 0.2 kg-0.7 kg.

ISUTAMI SAPFL 2-bolt pressed steel flange mounted unit is widely applied in transmission systems since it is easy to assemble and disassemble, and this kind of unit has a long service life under certain conditions, which has attracted more and more customers' attention. In addition, ISUTAMI can design and manufacture more 2-bolt pressed steel flange housing units of the other sizes to meet the specific needs from customers.
SAPFL Series Round Flange Mounted Unit Pressed Steel
ISUTAMI SAPFL 2-bolt pressed steel flange mounted unit, also known as ISUTAMI SAPFL 2-bolt diamond pressed steel flange mounted unit, which is mainly composed of PFL200 series pressed steel housing and SA200 series insert spherical ball bearing . The bearing housing of the SBPFL mounted unit is a diamond-shaped flange type, made of low carbon steel material and galvanized on the surface for superior corrosion resistance. The flanges on both sides of the housing have a square mounting bolt hole with the side length (s) of 9 mm or 10 mm and a corresponding bolt size range of 3/8 inch - M8. A spherical bearing is mounted inside the bearing housing, which is mainly made of bearing steel material. One side of the inner ring of the bearing has an extended part, and two set screws are on this part for mounting the round shaft.

The inner ring of ISUTAMI SAPFL 2-bolt diamond pressed steel flange mounted unit is a narrow one as well as a set screw locking type. The entire bearing unit is light duty. The diameter of the round shaft that fits its inner ring ranges from 20 mm to 1-5/16 inches. The length of the SAPFL mounted bearing unit (a) ranges from 81 mm to 125 mm; the overall width (b) ranges from 59 mm to 94 mm, and the length between the center points of two bolt holes (e) ranges from 64 mm to 100 mm. The thickness of the unit (Bi) ranges from 28.6 mm to 38.9 mm. In addition, SAPFL 2 bolted pressed steel flange mounted units have an overall weight range of 0.2 kg-0.7 kg.

ISUTAMI SAPFL 2-bolt pressed steel flange mounted unit is widely applied in transmission systems since it is easy to assemble and disassemble, and this kind of unit has a long service life under certain conditions, which has attracted more and more customers' attention. In addition, ISUTAMI can design and manufacture more 2-bolt pressed steel flange housing units of the other sizes to meet the specific needs from customers.

SAPFL Series Round Flange Mounted Unit Pressed Steel Size Chart

Round Flange Mounted Unit Pressed Steel SAPFL

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm a e g c s b f Bi n W
SAPFL207-21 SA207-21 PFL207 1-5/16 - 125 100 2.6 22 10 94 81 38.9 8.5 55.6 3/8 0.7
SAPFL207-22 SA207-22 PFL207 1-3/8 - 125 100 2.6 22 10 94 81 38.9 8.5 55.6 3/8 0.7
SAPFL207-23 SA207-23 PFL207 1-7/16 - 125 100 2.6 22 10 94 81 38.9 8.5 55.6 3/8 0.7
SAPFL206-20 SA206-20 PFL206 1-1/4 - 113 90 2.6 17 10 84 71 35.7 8.0 44.5 3/8 0.5
SAPFL207 SA207 PFL207 - 35 125 100 2.6 22 10 94 81 38.9 8.5 55.6 M10 0.7
SAPFL207-20 SA207-20 PFL207 1-1/4 - 125 100 2.6 22 10 94 81 38.9 8.5 55.6 3/8 0.7
SAPFL206-17 SA206-17 PFL206 1-1/16 - 113 90 2.6 17 10 84 71 35.7 8.0 44.5 3/8 0.5
SAPFL206-18 SA206-18 PFL206 1-1/8 - 113 90 2.6 17 10 84 71 35.7 8.0 44.5 3/8 0.5
SAPFL206-19 SA206-19 PFL206 1-3/16 - 113 90 2.6 17 10 84 71 35.7 8.0 44.5 3/8 0.5
SAPFL205-15 SA205-15 PFL205 15/16 - 95 76 2.1 17 9 71 60 31.0 7.5 38.1 5/16 0.3
SAPFL205-16 SA205-16 PFL205 1 - 95 76 2.1 17 9 71 60 31.0 7.5 38.1 5/16 0.3
SAPFL206 SA206 PFL206 - 30 113 90 2.6 17 10 84 71 35.7 8.0 44.5 M10 0.5
SAPFL204-12 SA204-12 PFL204 3/4 - 90 71 2.1 16 9 67 56 31.0 7.0 32 5/16 0.3
SAPFL205 SA205 PFL205 - 25 95 76 2.1 17 9 71 60 31.0 7.5 38.1 M8 0.3
SAPFL205-14 SA205-14 PFL205 7/8 - 95 76 2.1 17 9 71 60 31.0 7.5 38.1 5/16 0.3
SAPFL201-8 SA201-8 PFL203 1/2 - 81 64 1.9 14 7 59 49 28.6 6.0 28.6 1/4 0.2
SAPFL202-10 SA202-10 PFL203 5/8 - 81 64 1.9 14 7 59 49 28.6 6.0 28.6 1/4 0.2
SAPFL204 SA204 PFL204 - 20 90 71 2.1 16 9 67 56 31.0 7.0 32 M8 0.3
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China