ISUTAMI BEARINGS
en
SAPFT Series Triangle Flange Mounted Unit Pressed Steel
E-catalog
ISUTAMI BEARINGS

SAPFT Series Triangle Flange Mounted Unit Pressed Steel

SAPFT Series Triangle Flange Mounted Unit Pressed Steel
ISUTAMI SAPFT pressed steel triangle flange mounted unit, also known as ISUTAMI SAPFT 3-bolt pressed steel triangle flange mounted bearing unit, combined of two main components: a stamped steel housing and a built-in spherical bearing. The housing of bearing unit is the PFT series, which is with a hexagonal flange made of galvanized low carbon stamped steel. There are three square bolt holes on the flange with an angle of 120°between each hole. These holes are used to fix and install the entire bearing unit. The spherical bearing in the bearing housing is a rolling ball one. The bearing is the SA200 series, which is used to reduce the friction of the transmission equipment during operation. There is a dust-proof rubber ring on each side of the bearing.

ISUTAMI SAPFT pressed steel triangle flange mounted unit has a narrow inner ring of the eccentric collar locking type. The bearing units are light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 1-5/16 inches. The total length of the SAPFT bearing unit (a) ranges from 69 mm to 106 mm; the length of bolt holes on the flange (s) ranges from 7 mm, 9 mm or 10 mm; the matching bolt size ranges from 3/8 inch to M8. The length of the main part of the bearing in the unit (c) ranges from 14 mm to 19 mm; the diameter of the outer ring of the bearing housing (f) ranges from 49 mm to 81 mm; the overall length of the unit(Bi) ranges from 28.6 mm to 38.9 mm. In addition, the overall weight range of SAPFT pressed steel triangle flange mounted unit ranges from 0.26 kg to 0.7 kg.

ISUTAMI SAPFT 3-bolt pressed steel triangle flange mounted bearing unit is easy to assemble and disassemble. It has a long service life under normal conditions and is used in some specific mechanical equipment. ISUTAMI can also design and manufacture other sizes of pressed steel triangle flange mounted unit for customers to meet their specific needs. If you have special needs, feel free to contact us.
SAPFT Series Triangle Flange Mounted Unit Pressed Steel
ISUTAMI SAPFT pressed steel triangle flange mounted unit, also known as ISUTAMI SAPFT 3-bolt pressed steel triangle flange mounted bearing unit, combined of two main components: a stamped steel housing and a built-in spherical bearing. The housing of bearing unit is the PFT series, which is with a hexagonal flange made of galvanized low carbon stamped steel. There are three square bolt holes on the flange with an angle of 120°between each hole. These holes are used to fix and install the entire bearing unit. The spherical bearing in the bearing housing is a rolling ball one. The bearing is the SA200 series, which is used to reduce the friction of the transmission equipment during operation. There is a dust-proof rubber ring on each side of the bearing.

ISUTAMI SAPFT pressed steel triangle flange mounted unit has a narrow inner ring of the eccentric collar locking type. The bearing units are light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 1-5/16 inches. The total length of the SAPFT bearing unit (a) ranges from 69 mm to 106 mm; the length of bolt holes on the flange (s) ranges from 7 mm, 9 mm or 10 mm; the matching bolt size ranges from 3/8 inch to M8. The length of the main part of the bearing in the unit (c) ranges from 14 mm to 19 mm; the diameter of the outer ring of the bearing housing (f) ranges from 49 mm to 81 mm; the overall length of the unit(Bi) ranges from 28.6 mm to 38.9 mm. In addition, the overall weight range of SAPFT pressed steel triangle flange mounted unit ranges from 0.26 kg to 0.7 kg.

ISUTAMI SAPFT 3-bolt pressed steel triangle flange mounted bearing unit is easy to assemble and disassemble. It has a long service life under normal conditions and is used in some specific mechanical equipment. ISUTAMI can also design and manufacture other sizes of pressed steel triangle flange mounted unit for customers to meet their specific needs. If you have special needs, feel free to contact us.

SAPFT Series Triangle Flange Mounted Unit Pressed Steel Size Chart

Triangle Flange Mounted Unit Pressed Steel SAPFT

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm a e h s c g b f Bi n W
SAPFT207-21 SA207-21 PFT207 1-5/16 - 106 100 44 10 19 2.6 32 81 38.9 8.5 55.6 3/8 0.70
SAPFT207-22 SA207-22 PFT207 1-3/8 - 106 100 44 10 19 2.6 32 81 38.9 8.5 55.6 3/8 0.70
SAPFT207-23 SA207-23 PFT207 1-7/16 - 106 100 44 10 19 2.6 32 81 38.9 8.5 55.6 3/8 0.70
SAPFT206-20 SA206-20 PFT206 1-1/4 - 94 90 38 10 17 2.6 25 71 35.7 8.0 44.5 3/8 0.40
SAPFT207 SA207 PFT207 - 35 106 100 44 10 19 2.6 32 81 38.9 8.5 55.6 M10 0.70
SAPFT207-20 SA207-20 PFT207 1-1/4 - 106 100 44 10 19 2.6 32 81 38.9 8.5 55.6 3/8 0.70
SAPFT206-17 SA206-17 PFT206 1-1/16 - 94 90 38 10 17 2.6 25 71 35.7 8.0 44.5 3/8 0.40
SAPFT206-18 SA206-18 PFT206 1-1/8 - 94 90 38 10 17 2.6 25 71 35.7 8.0 44.5 3/8 0.40
SAPFT206-19 SA206-19 PFT206 1-3/16 - 94 90 38 10 17 2.6 25 71 35.7 8.0 44.5 3/8 0.40
SAPFT205-15 SA205-15 PFT205 15/16 - 79 76 35 9 17 2.1 28 66 31.0 7.5 38.1 5/16 0.30
SAPFT205-16 SA205-16 PFT205 1 - 79 76 35 9 17 2.1 28 66 31.0 7.5 38.1 5/16 0.30
SAPFT206 SA206 PFT206 - 30 94 90 38 10 17 2.6 25 71 35.7 8.0 44.5 M10 0.40
SAPFT204-12 SA204-12 PFT204 3/4 - 76 71 33 9 16 2.1 27 56 31.0 7.0 32.0 5/16 0.27
SAPFT205 SA205 PFT205 - 25 79 76 35 9 17 2.1 28 66 31.0 7.5 38.1 M8 0.30
SAPFT205-14 SA205-14 PFT205 7/8 - 79 76 35 9 17 2.1 28 66 31.0 7.5 38.1 5/16 0.30
SAPFT201-8 SA201-8 PFT203 1/2 - 69 64 29 7 14 1.9 21 49 28.6 6.0 28.6 1/4 0.26
SAPFT202-10 SA202-10 PFT203 5/8 - 69 64 29 7 14 1.9 21 49 28.6 6.0 28.6 1/4 0.26
SAPFT204 SA204 PFT204 - 20 76 71 33 9 16 2.1 27 56 31.0 7.0 32.0 M8 0.27
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China