ISUTAMI BEARINGS
SAPP Series Pillow Block Mounted Units Pressed Steel
E-catalog
ISUTAMI BEARINGS

SAPP Series Pillow Block Mounted Units Pressed Steel

SAPP Series Pillow Block Mounted Units Pressed Steel
ISUTAMI SAPP pressed steel pillow block mounted unit, also known as ISUTAMI SAPP 2-bolt pressed steel housing mounted bearing unit, is in a  stand-up structure like the stand-up cast iron mounted bearing unit, and SB is a bearing housing code name. The bearing is mainly consisted of a stamped steel bearing housing and a spherical ball bearing. The bearing housing is made of two pieces pressed steel plates of nap-together design. The stamped steel housing has anti-corrosion function. The spherical bearing inside the housing is made of bearing steel and also has a certain anti-corrosion function. The rubber seals are provided on both sides of the bearing to keep dust from entering into the bearing body. The bearing of SAPP bearing unit is PP200 series rolling ball bearing.

SAPP pressed steel pillow block mounted unit is light duty as well as set screw locking type, the inner ring of the insert bearing is a narrow one, and its matching mounting shaft diameter ranges from 1/2 inch up to 1-7/16 inches. The total length of the bearing unit (a) ranges from 92 mm to 146 mm, the length between the two bottom mounting bolt holes (e) ranges from 68 mm to 108 mm, and the width of the bottom (b) ranges from 25 mm to 33 mm. The overall width (Bi) of the unit ranges from 28.6 mm to 38.9 mm, and the height (h) of the shaft center ranges from 22.22 mm to 39.69 mm, as well as the mounting bolt diameter ranges from 5/16-3/8 inch. The overall unit weight ranges from 0.2 kg to 0.75 kg.

The pressed steel stand-up housing is lighter in weight and smaller in size than the cast iron one. It is the smallest type among the stand-up type housing, however, it can only be applied in applications with low load. Designed for simple applications with limited loads and speeds, the SAPP unit provides a simple and effective bearing arrangement that accommodates moderate misalignment of mounting tolerances and is easy to mount on the associated equipment. ISUTAMI is able to design and manufacture more mounted bearing units with special size for different customers.
SAPP Series Pillow Block Mounted Units Pressed Steel
ISUTAMI SAPP pressed steel pillow block mounted unit, also known as ISUTAMI SAPP 2-bolt pressed steel housing mounted bearing unit, is in a  stand-up structure like the stand-up cast iron mounted bearing unit, and SB is a bearing housing code name. The bearing is mainly consisted of a stamped steel bearing housing and a spherical ball bearing. The bearing housing is made of two pieces pressed steel plates of nap-together design. The stamped steel housing has anti-corrosion function. The spherical bearing inside the housing is made of bearing steel and also has a certain anti-corrosion function. The rubber seals are provided on both sides of the bearing to keep dust from entering into the bearing body. The bearing of SAPP bearing unit is PP200 series rolling ball bearing.

SAPP pressed steel pillow block mounted unit is light duty as well as set screw locking type, the inner ring of the insert bearing is a narrow one, and its matching mounting shaft diameter ranges from 1/2 inch up to 1-7/16 inches. The total length of the bearing unit (a) ranges from 92 mm to 146 mm, the length between the two bottom mounting bolt holes (e) ranges from 68 mm to 108 mm, and the width of the bottom (b) ranges from 25 mm to 33 mm. The overall width (Bi) of the unit ranges from 28.6 mm to 38.9 mm, and the height (h) of the shaft center ranges from 22.22 mm to 39.69 mm, as well as the mounting bolt diameter ranges from 5/16-3/8 inch. The overall unit weight ranges from 0.2 kg to 0.75 kg.

The pressed steel stand-up housing is lighter in weight and smaller in size than the cast iron one. It is the smallest type among the stand-up type housing, however, it can only be applied in applications with low load. Designed for simple applications with limited loads and speeds, the SAPP unit provides a simple and effective bearing arrangement that accommodates moderate misalignment of mounting tolerances and is easy to mount on the associated equipment. ISUTAMI is able to design and manufacture more mounted bearing units with special size for different customers.

SAPP Series Pillow Block Mounted Units Pressed Steel Size Chart

Pillow Block Mounted Units Pressed Steel SAPP

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm h a e b S1 S2 w g Bi n W
SAPP201-8 SA201-8 PP203ST 1/2 - 22.22 92 68 25 9 13 44 4 28.6 6 28.6 5/16 0.2
SAPP202-10 SA202-10 PP203ST 5/8 - 22.22 92 68 25 9 13 44 4 28.6 6 28.6 5/16 0.2
SAPP204 SA204 PP204ST - 20 25.4 105 76 25 10 13 53 4 31 7 32 M8 0.24
SAPP204-12 SA204-12 PP204ST 3/4 - 25.4 105 76 25 10 13 53 4 31 7 32 5/16 0.24
SAPP205 SA205 PP205ST - 25 28.58 109 86 29 10 14 56 5 31 7.5 38.1 M10 0.33
SAPP205-14 SA205-14 PP205ST 7/8 - 28.58 109 86 29 10 14 56 5 31 7.5 38.1 3/8 0.33
SAPP205-15 SA205-15 PP205ST 15/16 - 28.58 109 86 29 10 14 56 5 31 7.5 38.1 3/8 0.33
SAPP205-16 SA205-16 PP205ST 1 - 28.58 109 86 29 10 14 56 5 31 7.5 38.1 3/8 0.33
SAPP206 SA206 PP206ST - 30 33.34 124 95 32 10 14 67 6 35.7 8 44.5 M10 0.5
SAPP206-17 SA206-17 PP206ST 1-1/16 - 33.34 124 95 32 10 14 67 6 35.7 8 44.5 3/8 0.5
SAPP206-18 SA206-18 PP206ST 1-1/8 - 33.34 124 95 32 10 14 67 6 35.7 8 44.5 3/8 0.5
SAPP206-19 SA206-19 PP206ST 1-3/16 - 33.34 124 95 32 10 14 67 6 35.7 8 44.5 3/8 0.5
SAPP206-20 SA206-20 PP206ST 1-1/4 - 33.34 124 95 32 10 14 67 6 35.7 8 44.5 3/8 0.5
SAPP207 SA207 PP207ST - 35 39.69 146 108 33 13 19 79 6 38.9 8.5 56.6 M10 0.75
SAPP207-20 SA207-20 PP207ST 1-1/4 - 39.69 146 108 33 13 19 79 6 38.9 8.5 56.6 3/8 0.75
SAPP207-21 SA207-21 PP207ST 1-5/16 - 39.69 146 108 33 13 19 79 6 38.9 8.5 56.6 3/8 0.75
SAPP207-22 SA207-22 PP207ST 1-3/8 - 39.69 146 108 33 13 19 79 6 38.9 8.5 56.6 3/8 0.75
SAPP207-23 SA207-23 PP207ST 1-7/16 - 39.69 146 108 33 13 19 79 6 38.9 8.5 56.6 3/8 0.75
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China