ISUTAMI BEARINGS
SBPF Series 3 Bolt Flange Mounted Units Pressed Steel
E-catalog
ISUTAMI BEARINGS

SBPF Series 3 Bolt Flange Mounted Units Pressed Steel

SBPF Series 3 Bolt Flange Mounted Units Pressed Steel
ISUTAMI SBPF pressed steel round flange mounted unit, also known as ISUTAMI SBPF 3-bolt pressed steel round flange mounted bearing unit, consisting of two main components: a flange stamped steel housing and a built-in spherical bearing. SB means that the unit uses SB200 series ball bearings, and PF is the code name for the bearing housing. The housing of SBPF bearing unit is a round flange housing made of low carbon pressed steel and galvanized on the surface of the material, so the housing has an anti-corrosion function. Three square bolt holes with a pitch of 120°are evenly distributed on the circular flange. These bolt holes are used to mount the entire mounted unit. The spherical bearing inside the bearing housing is a rolling ball one, which is mainly to reduce the friction of the transmission equipment. There is a dust-proof rubber race on each side of the bearing. In addition, the bearing unit is pre-lubricated, with a grease fitting in half and a grease groove in half.

ISUTAMI SBPF 3-bolt pressed steel round flange mounted unit has a narrow inner ring and its inner ring is a set screw locking type. The bearing unit is light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 40 mm. The total diameter of the SBPF bearing unit (a) ranges from 90 mm to 148 mm; the diameter without the flange portion (f) ranges from 49 mm to 90 mm, and the side length of the bolt holes on the flange (s) is 7 mm, 9 Mm, 10 mm or 13 mm, the bolt size range is 1/2 inch - M8; the length of the entire unit (Bi) ranges from 22 mm to 34 mm. In addition, the SBPF 3-bolt pressed steel flange mounted bearing unit has an overall weight range of 0.3 kg to 1 kg.

ISUTAMI SBPF pressed steel round flange mounted unit, is easy to assemble and disassemble, has a long service life under certain conditions, and is used in some specific machinery and equipment. ISUTAMI can also provide a 4-bolt round flange mounted unit, and the 4-bolt product is more stable after installation. In addition, we can design and manufacture other sizes of 3-bolt or 4-bolt pressed steel round flange mounted units for customers.
SBPF Series 3 Bolt Flange Mounted Units Pressed Steel
ISUTAMI SBPF pressed steel round flange mounted unit, also known as ISUTAMI SBPF 3-bolt pressed steel round flange mounted bearing unit, consisting of two main components: a flange stamped steel housing and a built-in spherical bearing. SB means that the unit uses SB200 series ball bearings, and PF is the code name for the bearing housing. The housing of SBPF bearing unit is a round flange housing made of low carbon pressed steel and galvanized on the surface of the material, so the housing has an anti-corrosion function. Three square bolt holes with a pitch of 120°are evenly distributed on the circular flange. These bolt holes are used to mount the entire mounted unit. The spherical bearing inside the bearing housing is a rolling ball one, which is mainly to reduce the friction of the transmission equipment. There is a dust-proof rubber race on each side of the bearing. In addition, the bearing unit is pre-lubricated, with a grease fitting in half and a grease groove in half.

ISUTAMI SBPF 3-bolt pressed steel round flange mounted unit has a narrow inner ring and its inner ring is a set screw locking type. The bearing unit is light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 40 mm. The total diameter of the SBPF bearing unit (a) ranges from 90 mm to 148 mm; the diameter without the flange portion (f) ranges from 49 mm to 90 mm, and the side length of the bolt holes on the flange (s) is 7 mm, 9 Mm, 10 mm or 13 mm, the bolt size range is 1/2 inch - M8; the length of the entire unit (Bi) ranges from 22 mm to 34 mm. In addition, the SBPF 3-bolt pressed steel flange mounted bearing unit has an overall weight range of 0.3 kg to 1 kg.

ISUTAMI SBPF pressed steel round flange mounted unit, is easy to assemble and disassemble, has a long service life under certain conditions, and is used in some specific machinery and equipment. ISUTAMI can also provide a 4-bolt round flange mounted unit, and the 4-bolt product is more stable after installation. In addition, we can design and manufacture other sizes of 3-bolt or 4-bolt pressed steel round flange mounted units for customers.

SBPF Series 3 Bolt Flange Mounted Units Pressed Steel Size Chart

2 Bolt Flange Mounted Units Pressed Steel SBPF

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm a e g c s f Bi n
SBPF208 SB208 PF208 - 40 148 119 3.4 21 13 90 34 9.0 M14 1.00
SBPF208-24 SB208-24 PF208 1-1/2 - 148 119 3.4 21 13 90 34 9.0 1/2 1.00
SBPF208-25 SB208-25 PF208 1-9/16 - 148 119 3.4 21 13 90 34 9.0 1/2 1.00
SBPF207-21 SB207-21 PF207 1-5/16 - 122 100 2.6 19 10 81 32 8.5 3/8 0.82
SBPF207-22 SB207-22 PF207 1-3/8 - 122 100 2.6 19 10 81 32 8.5 3/8 0.82
SBPF207-23 SB207-23 PF207 1-7/16 - 122 100 2.6 19 10 81 32 8.5 3/8 0.82
SBPF206-20 SB206-20 PF206 1-1/4 - 113 90 2.6 17 10 71 30 8.0 3/8 0.64
SBPF207 SB207 PF207 - 35 122 100 2.6 19 10 81 32 8.5 M10 0.82
SBPF207-20 SB207-20 PF207 1-1/4 - 122 100 2.6 19 10 81 32 8.5 3/8 0.82
SBPF206-17 SB206-17 PF206 1-1/16 - 113 90 2.6 17 10 71 30 8.0 3/8 0.64
SBPF206-18 SB206-18 PF206 1-1/8 - 113 90 2.6 17 10 71 30 8.0 3/8 0.64
SBPF206-19 SB206-19 PF206 1-3/16 - 113 90 2.6 17 10 71 30 8.0 3/8 0.64
SBPF205-15 SB205-15 PF205 15/16 - 95 76 2.1 17 9 66 27 7.5 5/16 0.38
SBPF205-16 SB205-16 PF205 1 - 95 76 2.1 17 9 66 27 7.5 5/16 0.38
SBPF206 SB206 PF206 - 30 113 90 2.6 17 10 71 30 8.0 M10 0.64
SBPF204-12 SB204-12 PF204 3/4 - 90 71 2.1 16 9 56 25 7.0 5/16 0.33
SBPF205 SB205 PF205 - 25 95 76 2.1 17 9 66 27 7.5 M8 0.38
SBPF205-14 SB205-14 PF205 7/8 - 95 76 2.1 17 9 66 27 7.5 5/16 0.38
SBPF201-8 SB201-8 PF203 1/2 - 81 64 2.0 14 7 49 22 6.0 1/4 0.30
SBPF202-10 SB202-10 PF203 5/8 - 81 64 2.0 14 7 49 22 6.0 1/4 0.30
SBPF204 SB204 PF204 - 20 90 71 2.1 16 9 56 25 7.0 M8 0.33

  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China