ISUTAMI BEARINGS
en
SBPFT Series Triangle Flange Mounted Unit Pressed Steel
E-catalog
ISUTAMI BEARINGS

SBPFT Series Triangle Flange Mounted Unit Pressed Steel

SBPFT Series Triangle Flange Mounted Unit Pressed Steel
ISUTAMI SBPFT pressed steel triangle flange mounted unit, also known as ISUTAMI SBPFT 3-bolt pressed steel triangle flange mounted bearing unit, combined of two main components: a stamped steel housing and a built-in spherical bearing. The housing of bearing unit is the PFT series, which is with a hexagonal flange made of galvanized low carbon stamped steel. There are three square bolt holes on the flange with an angle of 120°between each hole. These holes are mainly used to fix and install the entire bearing unit. The spherical bearing in the bearing housing is a rolling ball one. The bearing is the SB200 series, which is used to reduce the friction of the transmission equipment during operation. There is a dust-proof rubber ring on each side of the bearing. In addition, this series of products is pre-lubricated.

ISUTAMI SBPFT pressed steel triangle flange mounted unit has a narrow inner ring of the set screw locking type. The bearing units are light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 1-5/16 inches. The total length of the SBPFT bearing unit (a) ranges from 69 mm to 106 mm; the length of bolt holes on the flange (s) ranges from 7 mm, 9 mm or 10 mm; the matching bolt size ranges from 3/8 inch to M8. The length of the main part of the bearing in the unit (c) ranges from 14 mm to 19 mm; the diameter of the outer ring of the bearing housing (f) ranges from 49 mm to 81 mm; the overall length of the unit(Bi) ranges from 22 mm to 32 mm. In addition, the overall weight range of  SBPFT pressed steel triangle flange mounted unit ranges from 0.26 kg to 0.7 kg.

ISUTAMI SBPFT 3-bolt pressed steel triangle flange mounted bearing unit is easy to assemble and disassemble. It has a long service life under normal conditions and is used in some specific mechanical equipment. ISUTAMI can design and manufacture other sizes of pressed steel triangle flange mounted unit for customers to meet their specific needs. If you have special needs, feel free to contact our sales team.
SBPFT Series Triangle Flange Mounted Unit Pressed Steel
ISUTAMI SBPFT pressed steel triangle flange mounted unit, also known as ISUTAMI SBPFT 3-bolt pressed steel triangle flange mounted bearing unit, combined of two main components: a stamped steel housing and a built-in spherical bearing. The housing of bearing unit is the PFT series, which is with a hexagonal flange made of galvanized low carbon stamped steel. There are three square bolt holes on the flange with an angle of 120°between each hole. These holes are mainly used to fix and install the entire bearing unit. The spherical bearing in the bearing housing is a rolling ball one. The bearing is the SB200 series, which is used to reduce the friction of the transmission equipment during operation. There is a dust-proof rubber ring on each side of the bearing. In addition, this series of products is pre-lubricated.

ISUTAMI SBPFT pressed steel triangle flange mounted unit has a narrow inner ring of the set screw locking type. The bearing units are light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 1-5/16 inches. The total length of the SBPFT bearing unit (a) ranges from 69 mm to 106 mm; the length of bolt holes on the flange (s) ranges from 7 mm, 9 mm or 10 mm; the matching bolt size ranges from 3/8 inch to M8. The length of the main part of the bearing in the unit (c) ranges from 14 mm to 19 mm; the diameter of the outer ring of the bearing housing (f) ranges from 49 mm to 81 mm; the overall length of the unit(Bi) ranges from 22 mm to 32 mm. In addition, the overall weight range of  SBPFT pressed steel triangle flange mounted unit ranges from 0.26 kg to 0.7 kg.

ISUTAMI SBPFT 3-bolt pressed steel triangle flange mounted bearing unit is easy to assemble and disassemble. It has a long service life under normal conditions and is used in some specific mechanical equipment. ISUTAMI can design and manufacture other sizes of pressed steel triangle flange mounted unit for customers to meet their specific needs. If you have special needs, feel free to contact our sales team.

SBPFT Series Triangle Flange Mounted Unit Pressed Steel Size Chart

Triangle Flange Mounted Unit Pressed Steel SBPFT

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm a e h s c g b f Bi n
SBPFT207-21 SB207-21 PFT207 1-5/16 - 106 100 44 10 19 2.6 32 81 32 8.5 3/8 0.70
SBPFT207-22 SB207-22 PFT207 1-3/8 - 106 100 44 10 19 2.6 32 81 32 8.5 3/8 0.70
SBPFT207-23 SB207-23 PFT207 1-7/16 - 106 100 44 10 19 2.6 32 81 32 8.5 3/8 0.70
SBPFT206-20 SB206-20 PFT206 1-1/4 - 94 90 38 10 17 2.6 25 71 30 8.0 3/8 0.40
SBPFT207 SB207 PFT207 - 35 106 100 44 10 19 2.6 32 81 32 8.5 M10 0.70
SBPFT207-20 SB207-20 PFT207 1-1/4 - 106 100 44 10 19 2.6 32 81 32 8.5 3/8 0.70
SBPFT206-17 SB206-17 PFT206 1-1/16 - 94 90 38 10 17 2.6 25 71 30 8.0 3/8 0.40
SBPFT206-18 SB206-18 PFT206 1-1/8 - 94 90 38 10 17 2.6 25 71 30 8.0 3/8 0.40
SBPFT206-19 SB206-19 PFT206 1-3/16 - 94 90 38 10 17 2.6 25 71 30 8.0 3/8 0.40
SBPFT205-15 SB205-15 PFT205 15/16 - 79 76 35 9 17 2.1 28 66 27 7.5 5/16 0.30
SBPFT205-16 SB205-16 PFT205 1 - 79 76 35 9 17 2.1 28 66 27 7.5 5/16 0.30
SBPFT206 SB206 PFT206 - 30 94 90 38 10 17 2.6 25 71 30 8.0 M10 0.40
SBPFT204-12 SB204-12 PFT204 3/4 - 76 71 33 9 16 2.1 27 56 25 7.0 5/16 0.27
SBPFT205 SB205 PFT205 - 25 79 76 35 9 17 2.1 28 66 27 7.5 M8 0.30
SBPFT205-14 SB205-14 PFT205 7/8 - 79 76 35 9 17 2.1 28 66 27 7.5 5/16 0.30
SBPFT201-8 SB201-8 PFT203 1/2 - 69 64 29 7 14 1.9 21 49 22 6.0 1/4 0.26
SBPFT202-10 SB202-10 PFT203 5/8 - 69 64 29 7 14 1.9 21 49 22 6.0 1/4 0.26
SBPFT204 SB204 PFT204 - 20 76 71 33 9 16 2.1 27 56 25 7.0 M8 0.27
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China