ISUTAMI BEARINGS
en
Shaft & Shaft Support
E-catalog
ISUTAMI BEARINGS

Shaft & Shaft Support

Shaft & Shaft Support
ISUTAMI linear shaft support is a product that has the guiding function of sliding bearing and can make linear motion possible. The requirements of these linear motion systems are: simple design, best execution, low maintenance costs, strict selection of durable materials for use, high-frequency heat treatment, accurate outside diameter, roundness, straightness and surface treatment.
Shaft & Shaft Support
ISUTAMI linear shaft support is a product that has the guiding function of sliding bearing and can make linear motion possible. The requirements of these linear motion systems are: simple design, best execution, low maintenance costs, strict selection of durable materials for use, high-frequency heat treatment, accurate outside diameter, roundness, straightness and surface treatment.

Shaft & Shaft Support Products


Shaft & Shaft Support Series

Ordinary linear shaft support: the surface hardness of ordinary linear optical axis is required to be very high because the ordinary linear shaft support is in contact with the point opposite to the linear bearing, so the material and heat treatment method is very important.Material: gb gcr15, hardness: hrc60 + 2;Depth of hardened layer: 0.8-3mm;Surface roughness: ra0.10m-ra0.35m;Straightness: less than 70um/1000mm;Shaft outer diameter tolerance g6.

Chrome-plated linear shaft support: chrome-plated linear shaft support is coated with a layer of hard chromium on the basis of the ordinary linear shaft support, also known as the bearing bar, which can be applied to the environment of easy rust or bad environment. This axis is widely used in the motion part of industrial robots, automatic sliding system devices.Material: gb gcr15, hardness: hrc60 + 2;Depth of hardened layer: 0.8-3mm;Surface roughness: ra0.10m-ra0.35m linearity material.

Chrome plated linear flexible shaft: chrome plated linear flexible shaft can be directly used for precision piston rod and some self-lubricating bearings due to its thick chrome coating. Due to its moderate hardness, it has been applied in many fields.Material: 45# or 40cr or 2cr13;Hardness: hb220-260;Depth of hardened layer: 0.8-3mm;Straightness: less than 0.15mm/1000mm;Chrome-plated layer thickness: 0.02-0.05mm.

Stainless steel spool: stainless steel spool with high corrosion resistance, high strength and wear resistance to maintain its efficient performance. Therefore, it can be used in situations where oxidation is prone, such as water, chemicals, steam, sea water and so on.Material: sus404c, sus304 hardness: hrc60 + 2;Depth of hardened layer: 0.8-3mm;Surface roughness: ra0.10m-ra0.35m straightness.

Chrome-plated hollow shaft: due to its hollow structure characteristics, the hollow shaft greatly reduces weight and simplifies the structure, its internal suitable for penetration measurement wire, compressed air, adding lubricating oil, or for the robotic arm.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China