ISUTAMI BEARINGS
en
Shaft Support
E-catalog
ISUTAMI BEARINGS

Shaft Support

Shaft Support
ISUTAMI shaft support, also called linear shaft block, is a product used for end or intermittent support where loads are light and slight shaft deflection is not a concern. Unlike shaft support rails, blocks do not permit longitudinal passage of open type ball bushing bearings. Shaft supports enable clamping of shafts, and eliminate the need for bolts to maintain shaft position. Shimming is suggested for high precision applications to eliminate the effect of variations in surface of base or manufacturing tolerances between supports.
Shaft Support
ISUTAMI shaft support, also called linear shaft block, is a product used for end or intermittent support where loads are light and slight shaft deflection is not a concern. Unlike shaft support rails, blocks do not permit longitudinal passage of open type ball bushing bearings. Shaft supports enable clamping of shafts, and eliminate the need for bolts to maintain shaft position. Shimming is suggested for high precision applications to eliminate the effect of variations in surface of base or manufacturing tolerances between supports.

Shaft Support Products


Shaft Support Features

ISUTAMI shaft support rails, matching with the open type linear bushing bearings, linear rail supports can be purchased from ISUTAMI with and without predrilled holes in the aluminum support. The shaft is pre-mounted to the shaft support rail. Please note that shaft supports require the use of open design linear bearing units.

Support shaft is a kind of shaft, so it also refers to a mechanical part.Basically be to have prop up, fixed action, it is to point to cylindrical part commonly.A wheel or other moving part turns around or with it.

According to the use of the main parts to choose the material to manufacture the support shaft.If used for support, choose a material that will hold the support.If used for fixing, choose materials that are easy to weld the support shaft to the fixed point.According to the main parts of the material to choose the manufacture of supporting shaft material.Generally speaking, the main parts of steel, in order to make the parts can have the same service life with the main parts, the parts should be selected and the main parts of the same or higher material manufacturing;If the main part is made of soft materials such as plastic, the material with the same or higher texture can be selected.According to the principle of reducing cost, select the material of manufacturing support shaft.If the same purpose can be achieved under the premise of the general choice of the lowest cost of materials manufacturing shaft.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China