ISUTAMI BEARINGS
SI-TK Rod Ends
E-catalog
ISUTAMI BEARINGS

SI-TK Rod Ends

SI-TK Rod Ends
Rod ends bearing is a spherical sliding bearing, which is composed of an inner ring with a spherical sliding sphere contact surface, an inner ring with an inner sphere and an outer ring with an inner sphere, and can bear a large load.According to its different types and structures, it can bear the radial load, the axial load or the combined load in the radial direction.Generally used for low speed swing motion, but also in a certain Angle range for tilt motion, when the supporting shaft and shaft shell hole is not concentricity is large, still can work normally.Self-lubricating joint auxiliary bearing should be used in water conservancy, professional machinery and other industries.Because the spherical sliding contact area of the joint bearings, tilt Angle is large, but also because most of the joint bearings to take special processing methods, such as surface phosphating, zinc plating, chrome or outer sliding surface lining, gasketing, spraying.Therefore has the big load ability and the anti-impact ability, and has the anti-corrosion, the wear-resisting, from adjusts the center, the lubrication is good or from the lubrication does not have the lubrication dirt pollution the characteristic, even if the installment dislocation can also work normally.Therefore, the joint bearings are widely used in low speed swing motion, tilt motion and rotation motion.Spherical plain bearings and rod end joint bearings have a variety of designs and have different combinations of sliding contact surfaces.Each design and combination has unique properties that make it particularly suitable for certain applications.
SI-TK Rod Ends
Rod ends bearing is a spherical sliding bearing, which is composed of an inner ring with a spherical sliding sphere contact surface, an inner ring with an inner sphere and an outer ring with an inner sphere, and can bear a large load.According to its different types and structures, it can bear the radial load, the axial load or the combined load in the radial direction.Generally used for low speed swing motion, but also in a certain Angle range for tilt motion, when the supporting shaft and shaft shell hole is not concentricity is large, still can work normally.Self-lubricating joint auxiliary bearing should be used in water conservancy, professional machinery and other industries.Because the spherical sliding contact area of the joint bearings, tilt Angle is large, but also because most of the joint bearings to take special processing methods, such as surface phosphating, zinc plating, chrome or outer sliding surface lining, gasketing, spraying.Therefore has the big load ability and the anti-impact ability, and has the anti-corrosion, the wear-resisting, from adjusts the center, the lubrication is good or from the lubrication does not have the lubrication dirt pollution the characteristic, even if the installment dislocation can also work normally.Therefore, the joint bearings are widely used in low speed swing motion, tilt motion and rotation motion.Spherical plain bearings and rod end joint bearings have a variety of designs and have different combinations of sliding contact surfaces.Each design and combination has unique properties that make it particularly suitable for certain applications.

SI-TK Rod Ends Size Chart

Rod Ends SI-TK

Ends No. Dimensions Basic Load Rating α
Weight
(kg)
d B dk C1 d2 d3 h1 l3 l4 l5 l7 w d4 d5 Cr(KN) Cor(KN)
SI5T/K 5 8 11.1 7.5 18 M5*0.80 27 8 36 4 10 10 12 11 3.6 4.6 4 0.02
SI6T/K 6 9 12.7 7.5 20 M6*1.00 30 9 40 5 11 10 10 13 4.7 5.2 9 0.025
SI8T/K 8 12 15.8 9.5 24 M8*1.25 36 12 48 5 13 13 12.5 16 7.6 8.2 12 0.047
SI10T/K 10 14 19.1 11.5 30 M10*1.50 43 15 58 6.5 16 16 17 19 12 15 10 0.088
M10*1.25
SI12T/K 12 16 22.2 12.5 34 M12*1.75 50 18 67 6.5 18 18 17.5 22 14 19 12 0.14
M12*1.25
SI14T/K 14 19 25.4 14.5 38 M14*2.00 57 21 76 8 20 21 25 25 19 24 14 0.2
M14*1.50
SI16T/K 16 21 28.6 15.5 42 M16*2.00 64 24 85 8 24 22 27 27 23 29 14 0.25
M16*1.50
SI18T/K 18 23 31.8 17.5 46 M18*1.50 71 27 94 10 22.5 27 25 31 29 34 15 0.35
SI20T/K 20 25 34.9 18.5 50 M20*1.50 77 30 102 10 25 30 34 34 34 40 14 0.43
SI22T/K 22 28 38.1 21 56 M22*1.50 84 33 112 12 27.5 34 37 37 42 50 14 0.61
SI25T/K 25 31 42.9 23 60 M24*2.00 94 36 124 12 28.5 36 33.5 42 52 57 14 0.81
SI30T/K 30 37 50.8 27 70 M30*2.00 110 45 145 15 33 46 40 51 73 77 17 1.4
SI35T/K 35 43 57.2 28 80 M36*2.00 125 56 165 15 42 50 46 56 110 116 17 1.6

SI-TK Rod Ends Features

Rod ends bearings are damaged for a variety of reasons, including loads beyond the original estimates, poor sealing, tight fit, and small bearing clearances..Each of these factors has its own special damage pattern and will leave a special damage trace.Therefore, in most cases a damaged bearing can be found to have a probable cause.One third of the bearing damage is due to fatigue damage, another third is due to poor lubrication, and the other third is due to contaminants entering the bearing or improper installation and handling.These forms of damage vary.In pulp and paper industry, the damage of bearings is mostly caused by poor lubrication or pollution rather than material fatigue.Bearings belong to precision parts, even if the use of high-performance bearings, if the use of improper, can not achieve the desired performance effect, and easy to make the bearing damage.Therefore, the use of bearings should pay attention to a number of aspects.Keep the bearing and its surrounding environment clean, even if the naked eye can not see the tiny dust into the bearing, it will increase the bearing wear, vibration and noise.Careful use of installation, do not allow strong stamping, do not allow direct impact with the hammer bearing, do not allow the transfer of pressure through the rolling body.Use proper, accurate installation tools, use special tools whenever possible, and avoid cloth and staple materials at all costs.To prevent the corrosion of the bearing, directly take the bearing by hand, to fully wash the sweat on the hand, and coated with high quality mineral oil before operation, especially in the rainy season and summer to pay attention to rust.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China