ISUTAMI BEARINGS
Solid Collar
E-catalog
ISUTAMI BEARINGS

Solid Collar

Solid Collar
The solid collars is a cylindrical mechanical part on the rotating shaft, which is an integral part of the sliding bearing.Generally speaking, the solid collars and bearing block adopt interference fit, and adopt clearance fit with the shaft.The solid collars is generally used with the bearing. The shaft sleeve is the sleeve, and the bearing is the part that can fix and reduce the friction coefficient of the load in the process of mechanical transmission.The common thing between the bush and the bearing is that both bear the load of the shaft.And the difference between the two is the overall structure of the shaft sleeve, rotation is the relative motion between the shaft and the shaft sleeve;While the bearing is split, the rotation is the relative movement of the inner and outer rings of the bearing itself.But in essence, the bush is actually a kind of sliding bearing.The bearing bush is equivalent to the outer ring of the sliding bearing. The bearing sleeve is integral and moves relative to the shaft, while the bearing bush is fragmentary and rotates relative to the shaft.
Solid Collar
The solid collars is a cylindrical mechanical part on the rotating shaft, which is an integral part of the sliding bearing.Generally speaking, the solid collars and bearing block adopt interference fit, and adopt clearance fit with the shaft.The solid collars is generally used with the bearing. The shaft sleeve is the sleeve, and the bearing is the part that can fix and reduce the friction coefficient of the load in the process of mechanical transmission.The common thing between the bush and the bearing is that both bear the load of the shaft.And the difference between the two is the overall structure of the shaft sleeve, rotation is the relative motion between the shaft and the shaft sleeve;While the bearing is split, the rotation is the relative movement of the inner and outer rings of the bearing itself.But in essence, the bush is actually a kind of sliding bearing.The bearing bush is equivalent to the outer ring of the sliding bearing. The bearing sleeve is integral and moves relative to the shaft, while the bearing bush is fragmentary and rotates relative to the shaft.

Solid Collar Products


Solid Collar Features

Grease used in bearings must have antirust effect, antirust agent best insoluble in water.The grease should have good adhesion to form an oil film on the steel surface, which can be maintained even if the grease is filled with water.Grease will become soft during machining, leading to leakage.When there are examples of vibration applications, grease will be thrown into the bearing by the bearing housing.If the mechanical stability of grease is not enough, grease will be constantly thrown out of the bearing, which will cause mechanical disintegration of the soap structure and damage of grease.Oil seal is necessary to protect the bearings and lubricants to prevent external pollution, no matter what sundries or moisture can not infiltrate into the bearing, in order to prevent damage.Proper installation and maintenance is an important factor to maximize the service life of bearings.At the same time, we must pay attention to the cleanliness of the bearing, the correctness of bearing selection and the selection of appropriate installation and maintenance tools.Bearings must be protected from contaminants and moisture and must be properly installed and lubricated.The design of the bearings, the condition of the oil seals, the type and cycle of the lubricants, and even the specialized maintenance all play the same important role.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China