ISUTAMI BEARINGS
SSA200 Stainless Steel Bearing
E-catalog
ISUTAMI BEARINGS

SSA200 Stainless Steel Bearing

SSA200 Stainless Steel Bearing
The stainless steel outer spherical bearing with a seat will heat up after the start of operation, after a period of time, that is, at a lower temperature in the normal. To normal time, according to the size of the bearing, form, rotation speed, lubrication method, change in the heat release conditions around the bearing, at this time it takes about 20 minutes to a few hours. When the temperature of outer spherical bearing with seat does not reach the normal state and abnormal temperature rise occurs, the following reasons can be considered. In addition, the use should be stopped as soon as possible and necessary countermeasures should be taken.
SSA200 Stainless Steel Bearing
The stainless steel outer spherical bearing with a seat will heat up after the start of operation, after a period of time, that is, at a lower temperature in the normal. To normal time, according to the size of the bearing, form, rotation speed, lubrication method, change in the heat release conditions around the bearing, at this time it takes about 20 minutes to a few hours. When the temperature of outer spherical bearing with seat does not reach the normal state and abnormal temperature rise occurs, the following reasons can be considered. In addition, the use should be stopped as soon as possible and necessary countermeasures should be taken.

SSA200 Stainless Steel Bearing Products

SSA200 Stainless Steel Bearing Size Chart

Stainless Steel Bearing SSA200

Bearing No.
Bore
Diameter
Boundary Dimensions(mm)
Basic
Load Rating
(KN)
Basic Static Load Rating
(KN)
Weight
(Kg)
d D Bi Be r N M L W K G ds
in mm
SSA201 - 12 40 19.1 12 0.8 6.0 13.1 28.6 28.6 13.50 5.0 M6*0.75 7.84 3.58 0.12
SSA201-8 1/2 - 0.14
SSA202 - 15 0.11
SSA202-10 5/8 - 0.13
SSA203 - 17 0.10
SSA203-11 11/16 - 0.12
SSA204 - 20 47 21.5 14 1.5 7.0 14.5 31.0 33.3 13.50 5.0 M6*0.75 10.37 5.04 0.15
SSA204-12 3/4 - 0.16
SSA205 - 25 52 21.5 15 1.5 7.5 14.0 31.0 38.1 13.50 5.0 M6*0.75 11.31 5.97 0.18
SSA205-14 7/8 - 0.21
SSA205-15 15/16 - 0.19
SSA205-16 1 - 0.18
SSA206 - 30 62 23.8 16 1.5 8.0 15.8 35.7 44.5 15.90 6.0 M8*1 15.73 8.64 0.30
SSA206-17 1-1/16 - 0.34
SSA206-18 1-1/8 - 0.32
SSA206-19 1-3/16 - 0.30
SSA206-20 1-1/4 - 0.29
SSA207 - 35 72 25.4 17 2.0 8.5 16.9 38.9 55.6 17.50 6.5 M8*1 20.83 11.68 0.50
SSA207-20 1-1/4 - 0.55
SSA207-21 1-5/16 - 0.53
SSA207-22 1-3/8 - 0.50
SSA207-23 1-7/16 - 0.47
SSA208 - 40 80 30.2 18 2.0 9.0 21.2 43.7 60.3 18.30 6.5 M8*1 23.55 13.60 0.63
SSA208-24 1-1/2 - 0.67
SSA208-25 1-9/16 - 0.65
SSA209 - 45 85 30.2 19 2.0 9.5 20.7 43.7 63.5 18.30 6.5 M8*1 26.44 19.56 0.66
SSA209-26 1-5/8 - 0.74
SSA209-27 1-11/16 - 0.72
SSA209-28 1-3/4 - 0.67
SSA210 - 50 90 30.2 20 2.0 10.0 20.2 43.7 69.9 18.30 6.5 M8*1 30.01 22.53 0.80
SSA210-29 1-13/16 - 0.90
SSA210-30 1-7/8 - 0.86
SSA210-31 1-15/16 - 0.83
SSA210-32 2 - 0.79

SSA200 Stainless Steel Bearing Features

The temperature of the stainless steel outer spherical bearing with seat is very important for maintaining the proper life of the bearing and preventing the deterioration of lubricating oil. Bearing in operation, to fully ensure lubrication, and according to the actual use of regular lubricating oil, not a long time off the oil. Therefore, for the user, should choose better, more suitable lubricating oil. The new type of special oil can significantly improve the lubrication performance, extend the oil change cycle, extend the service life of the stainless steel belt seat outer spherical bearing, and also has good rust and corrosion resistance. Using reinforced nylon material cage bearing, using temperature should be lower than 120 ℃, it is strictly prohibited to cooking oil to clean. ISUTAMI stainless steel outer spherical bearing with seat should pay attention to the method of daily maintenance and cleaning, to prevent damage, scratch roller surface. To remove as far as possible the residues of the external spherical bearing with seat, the method of washing and cleaning the residual oil should be adopted. It is necessary to avoid using the tilting type to make the cleaning garbage accumulate and remain in the bearing parts, which will lead to noise and wear failure of the outer spherical bearing with seat.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China