ISUTAMI BEARINGS
SSB200 Stainless Steel Bearing
E-catalog
ISUTAMI BEARINGS

SSB200 Stainless Steel Bearing

SSB200 Stainless Steel Bearing
Stainless steel spherical bearing according to the use of parts and conditions of use and environmental conditions to choose the size, precision, with the appropriate spherical bearing is to ensure the life of the bearing and reliability of the premise. Stainless steel outer spherical bearing is suitable for bearing radial load of radial and axial combined load, mainly in the car front and rear wheel hub, active bevel gear, differential, reducer, and other transmission parts.
SSB200 Stainless Steel Bearing
Stainless steel spherical bearing according to the use of parts and conditions of use and environmental conditions to choose the size, precision, with the appropriate spherical bearing is to ensure the life of the bearing and reliability of the premise. Stainless steel outer spherical bearing is suitable for bearing radial load of radial and axial combined load, mainly in the car front and rear wheel hub, active bevel gear, differential, reducer, and other transmission parts.

SSB200 Stainless Steel Bearing Products

SSB200 Stainless Steel Bearing Size Chart

Stainless Steel Bearing SSB200

Bearing No.
Bore
Diameter
Boundary Dimensions(mm)
Basic
Load Rating
(KN)
Basic Static Load Rating
(KN)
Weight
(Kg)
d D Bi Be r N M G ds
in mm
SSB201 - 12 40 22.0 12 1.0 6.0 16.0 4.5 M5*0.8 7.81 3.58 0.10
SSB201-8 1/2 - 0.10
SSB202 - 15 0.09
SSB202-10 5/8 - 0.09
SSB203 - 17 0.08
SSB203-11 11/16 - 0.08
SSB204 - 20 47 25.0 14 1.5 7.0 18.0 4.5 M6*0.75 10.37 5.04 0.12
SSB204-12 3/4 - 0.13
SSB205 - 25 52 27.0 15 1.5 7.5 19.5 5.0 M6*0.75 11.31 5.97 0.17
SSB205-14 7/8 - 0.18
SSB205-15 15/16 - 0.17
SSB205-16 1 - 0.16
SSB206 - 30 62 30.0 16 1.5 8.0 22.0 5.5 M6*0.75 15.73 8.64 0.25
SSB206-17 1-1/16 - 0.28
SSB206-18 1-1/8 - 0.26
SSB206-19 1-3/16 - 0.25
SSB206-20 1-1/4 - 0.23
SSB207 - 35 72 32.0 17 2.0 8.5 23.5 6.0 M8*1 20.83 11.68 0.37
SSB207-20 1-1/4 - 0.41
SSB207-21 1-5/16 - 0.39
SSB207-22 1-3/8 - 0.37
SSB207-23 1-7/16 - 0.35
SSB208 - 40 80 34.0 18 2.0 9.0 25.0 8.0 M8*1 23.55 13.60 0.45
SSB208-24 1-1/2 - 0.48
SSB208-25 1-9/16 - 0.45
SSB209 - 45 85 41.2 19 2.0 9.5 31.0 8.0 M8*1 26.44 19.56 0.80
SSB209-26 1-5/8 - 0.80
SSB209-27 1-11/16 - 0.80
SSB209-28 1-3/4 - 0.80
SSB210 - 50 90 43.5 20 2.0 10.0 32.6 9.0 M8*1 30.01 22.53 0.87
SSB210-29 1-13/16 - 0.87
SSB210-30 1-7/8 - 0.87
SSB210-31 1-15/16 - 0.87
SSB210-32 2 - 0.87

SSB200 Stainless Steel Bearing Features

Stainless steel outer spherical bearing in the correct installation, good lubrication environment, allowing for the limit of the speed of 0.3-0.5 times. Under normal circumstances, 0.2 times the limit speed is the most appropriate. The outer spherical bearing is generally not allowed to tilt the shaft relative to the housing hole, such as tilt, the maximum is not more than 2 '.Under normal load, and lubricant has a high temperature resistant performance, and abundant lubrication conditions, general bearing allowed in - 30 ℃ -- 150 ℃ of ambient temperature.

ISUTAMI bearing should be guaranteed to be normal in the process of operation, so that the bearing has no damage and the bearing life is longer. Shaft and bearing tolerance selection and control to match: bearing pressure into the spherical bearing should be flexible rotation without blocking. If there is obvious rotation is not flexible, it indicates that the size of the shaft is too large, the tolerance to be reduced. At the same time, appropriate assembly method should also be used: because ISUTAMI bearings are high-precision products, improper assembly may easily cause damage to external spherical bearing raceway, resulting in bearing damage. Special attention is paid to the assembly of foreign bodies into the bearing, when the bearing is mounted on the rotor for dynamic balance, it is easy to put the iron chips generated in the dynamic balance into the bearing, so it is best to do the dynamic balance before the bearing is installed. The prevention of paint rust is also very necessary: paint rust generally in the sealed motor, motor assembly sound is very good, but in the warehouse for some time, the motor abnormal sound change is very big, remove the outer spherical bearing will produce serious rust phenomenon.

ISUTAMI stainless steel spherical bearings in the inspection process, if there are too many problems, we need to replace the high-quality bearings.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China