ISUTAMI BEARINGS
en
Stamping Bearing SB-HM
E-catalog
ISUTAMI BEARINGS

Stamping Bearing SB-HM

Stamping Bearing SB-HM
Stamping Bearing of ISUTAMI sb-hm series, also known as the Bearing of sb-hm series Pressed,H is the abbreviation of high.Sb-hm series stamping bearing is a flangeless bearing, mainly composed of inner ring, outer ring, stamping body and cage.Stamping process of ISUTAMI Stamping Bearing can be roughly divided into the separation process and forming process.The separation process is to separate the stamping parts and blank along a certain contour line in the stamping process, and the quality of the separation section of the stamping parts must meet certain requirements.The forming process is to make the blanks deform plastically without damage and turn them into the required shape of finished products. At the same time, it should also meet the requirements of dimensional tolerance and other aspects.
Stamping Bearing SB-HM
Stamping Bearing of ISUTAMI sb-hm series, also known as the Bearing of sb-hm series Pressed,H is the abbreviation of high.Sb-hm series stamping bearing is a flangeless bearing, mainly composed of inner ring, outer ring, stamping body and cage.Stamping process of ISUTAMI Stamping Bearing can be roughly divided into the separation process and forming process.The separation process is to separate the stamping parts and blank along a certain contour line in the stamping process, and the quality of the separation section of the stamping parts must meet certain requirements.The forming process is to make the blanks deform plastically without damage and turn them into the required shape of finished products. At the same time, it should also meet the requirements of dimensional tolerance and other aspects.

Stamping Bearing SB-HM Size Chart

Stamping Bearing SB-HM

Bearing No. Dimension (inch) Drawing
D d B C
SB227-1000HM 2.265 0.645 0.81 0.38 1
SB227-1001HM 2.265 0.645 0.91 0.38 2
SB227-1002HM 2.265 0.698 0.91 0.38 3
SB227-1000HM 2.265 0.698 0.81 0.38 1
SB227-1101HM 2.265 0.698 0.91 0.38 2
SB227-1102HM 2.265 0.698 0.91 0.38 3
SB227-1000HM 2.265 0.645 0.81 0.38 1

Stamping Bearing SB-HM Features

There are two Stamping methods of ISUTAMI Stamping according to the Stamping temperature.This depends on the strength, plasticity, thickness, deformation degree and equipment capacity of the stamping bearing material, and the original heat treatment status and final service conditions of the material should be taken into account.Cold stamping metal processing at room temperature, generally applicable to the thickness of less than 4mm of raw materials.No heating, good surface quality, easy operation, low cost.The disadvantage is that the stamping bearing material will produce machining hardening phenomenon, serious metal loss of further deformation ability.Cold stamping requires that the thickness of the blank is uniform and the fluctuation range is small, the surface is bright and clean, no spots, no scratches and so on.A stamping process in which metal is heated to a specified temperature range.Advantages can eliminate internal stress, avoid hardening, increase the plasticity of materials, reduce deformation resistance, reduce the power consumption of equipment.

SB-HM series stamping bearing offers extensive support to the rotating shaft by means of compatible bearing and accessories, is mainly used in various heavy-duty load-bearing wheels, conveyor rollers, walking wheels, industrial and transportation equipment with high quality requirements, etc. The bearing applies to: drawers, keyboard drawer, sliding doors, windows, conveyors, medical equipment, office equipment, sports equipment, metal parts, cash drawer, cash register machine pulley, bicycles, building materials, hardware, machinery, transport, packaging, furniture pulley, drawer pulleys, pulley windows and doors, scooters.

  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China