ISUTAMI BEARINGS
en
Stamping Bearings
E-catalog
ISUTAMI BEARINGS

Stamping Bearings

Stamping Bearings
ISUTAMI stamping bearing, also called pressed bearing or conveyor roller bearing, combining of an inner ring, an outer ring, a stamping ball bearing and a retainer. It is pressed by external force to obtain the required shape and size. The stamped workpiece is mainly made of hot rolling or cold rolling steel plate and belt, the bearing usually used for heavy carrying capacity conveyor roller, walking wheels, industrial and transportation equipment with higher quality requirements.
Stamping Bearings
ISUTAMI stamping bearing, also called pressed bearing or conveyor roller bearing, combining of an inner ring, an outer ring, a stamping ball bearing and a retainer. It is pressed by external force to obtain the required shape and size. The stamped workpiece is mainly made of hot rolling or cold rolling steel plate and belt, the bearing usually used for heavy carrying capacity conveyor roller, walking wheels, industrial and transportation equipment with higher quality requirements.

Stamping Bearings Products


Stamping Bearings Features

Stamping bearing is the most representative bearing, widely used, can withstand radial load and two-way axial load.Suitable for high speed rotation and low noise and vibration.The sealed bearing with steel dust cover or rubber seal ring is pre-filled with appropriate amount of grease.Bearing of outer ring with retaining ring or flange, which is easy to be axial positioning and easy to be installed in the shell;The size of the maximum load bearing is the same as that of the standard bearing, but there is a filling groove in the inner and outer ring, which increases the number of balls and increases the rated load.

The difference between stamping bearings and sliding bearings: Firstly, from the structure of the surface, stamping bearings is support by stamping body rotation shaft . This contact area is made of a point, the more strength forcing body, the more times the area contacts point. Sliding bearing is to support the shaft of rotation by a smooth surface, so its contact area is a plane. Secondly, the movement in different ways, stamping bearing running model is stamping, while the sliding bearing is a sliding way,  thus the friction form is  incomplete. In the same situation, stamping bearings have simpler maintenance, much more reliable operation, better starting performance, and higher bearing capacity under the moderate speed than the sliding bearing.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China