ISUTAMI BEARINGS
SUCFCX00 Stainless Steel Mounted Bearings
E-catalog
ISUTAMI BEARINGS

SUCFCX00 Stainless Steel Mounted Bearings

SUCFCX00 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings in assembly process, also can check out the pros and cons of bearing material, so as to identify the merits of the bearing quality.After the bearing inner ring assembly on the shaft, under normal operating conditions, if the bearing material is unqualified, forced deformation due to the inner ring, change will cause stent deformation or clearance, so that the stainless steel mounted bearings rotation is not flexible and rolling body fall off.In addition, the bearing hardness value above or below are unqualified.When testing the hardness of the bearing, the side of the inner ring or outer ring should be selected at the checkpoint to avoid damaging the bearing.In the test, the hacksaw blade can be used as the outer ring and inner ring of the bearing. If the sound is made and there is no chip, leaving only an insignificant mark, the hardness is enough. If there is chip, the hardness of the material does not meet the requirements.In addition, before the hardness test, the hardness should be confirmed to meet the standard requirements before.
SUCFCX00 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings in assembly process, also can check out the pros and cons of bearing material, so as to identify the merits of the bearing quality.After the bearing inner ring assembly on the shaft, under normal operating conditions, if the bearing material is unqualified, forced deformation due to the inner ring, change will cause stent deformation or clearance, so that the stainless steel mounted bearings rotation is not flexible and rolling body fall off.In addition, the bearing hardness value above or below are unqualified.When testing the hardness of the bearing, the side of the inner ring or outer ring should be selected at the checkpoint to avoid damaging the bearing.In the test, the hacksaw blade can be used as the outer ring and inner ring of the bearing. If the sound is made and there is no chip, leaving only an insignificant mark, the hardness is enough. If there is chip, the hardness of the material does not meet the requirements.In addition, before the hardness test, the hardness should be confirmed to meet the standard requirements before.

SUCFCX00 Stainless Steel Mounted Bearings Products

SUCFCX00 Stainless Steel Mounted Bearings Size Chart

Stainless Steel Mounted Bearings SUCFCX00

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm)
Mass
(Kg)
in. mm a P e i f N g j k E S
SUCFCX05 SUCX05 SFCX05 - 25 111 92 65 10 76.2 10 24 6 9.5 32.2 15.9 1.06
SUCFCX05-14 SUCX05-14 7/8 -
SUCFCX05-15 SUCX05-15 15/16 -
SUCFCX05-16 SUCX05-16 1 -
SUCFCX06 SUCX06 SFCX06 - 30 127 105 74.2 8 85.7 12 23 10 9.5 33.4 17.5 1.46
SUCFCX06-18 SUCX06-18 1-1/8 -
SUCFCX06-19 SUCX06-19 1-3/16 -
SUCFCX07 SUCX07 SFCX07 - 35 133 111 78.5 9 92.1 12 26 11 11.0 39.2 19.0 1.88
SUCFCX07-20 SUCX07-20 1-1/4 -
SUCFCX07-21 SUCX07-21 1-5/16 -
SUCFCX07-22 SUCX07-22 1-3/8 -
SUCFCX08 SUCX08 SFCX08 - 40 133 111 78.5 9 92.1 12 26 11 11.0 39.2 19.0 1.85
SUCFCX08-24 SUCX08-24 1-1/2 -
SUCFCX08-25 SUCX08-25 1-9/16 -
SUCFCX09 SUCX09 SFCX09 - 45 155 130 91.9 8 108.0 14 25 12 11.0 40.6 19.0 2.73
SUCFCX09-26 SUCX09-26 1-5/8 -
SUCFCX09-27 SUCX09-27 1-11/16 -
SUCFCX09-28 SUCX09-28 1-3/4 -
SUCFCX10 SUCX10 SFCX10 - 50 162 136 96.2 7 114.3 14 25 16 11.0 40.4 22.2 3.13
SUCFCX10-30 SUCX10-30 1-7/8 -
SUCFCX10-31 SUCX10-31 1-15/16 -
SUCFCX11 SUCX11 SFCX11 - 55 180 152 107.5 4 127.0 16 26 22 13.0 43.7 25.4 4.23
SUCFCX11-32 SUCX11-32 2 -
SUCFCX11-34 SUCX11-34 2-7/8 -
SUCFCX11-35 SUCX11-35 2-3/16 -
SUCFCX12 SUCX12 SFCX12 - 60 194 165 116.7 11 139.7 16 33 20 14.0 50.7 25.4 5.30
SUCFCX12-36 SUCX12-36 2-1/4 -
SUCFCX12-38 SUCX12-38 2-3/8 -
SUCFCX12-39 SUCX12-39 2-7/16 -
SUCFCX13 SUCX13 SFCX13 - 65 194 165 116.7 11 139.7 16 33 20 14.0 55.4 30.2 5.48
SUCFCX13-40 SUCX13-40 2-1/2 -
SUCFCX13-41 SUCX13-41 2-9/16 -

SUCFCX00 Stainless Steel Mounted Bearings Features

Stainless steel mounted bearings installation position is not correct, will cause a larger ball end face and inner race and bearing seat block of axial force, bearing caused by overheating.It is better to use the specified precision level of the bearings.The solution to the heating caused by the different cores of the bending body holes of the bearing spindle in use is to repair the spindle.The solution to heating caused by too tight bearing belt is to adjust the belt to make it elastic properly.The solution to heating caused by poor lubrication is to select the specified brand of lubrication data and clean it properly.The solution to the heating caused by low assembly quality is to improve the assembly quality.The solution to the heat caused by running rings of the inner shell of the bearing is to replace the bearing and related wear parts, correct the diameter of the balance hole and check the static balance value.Too much axial force caused by heat is the solution to clean, adjust the sealing ring clearance requirements.The solution to heat caused by bearing damage is to replace the bearing.When we use stainless steel mounted bearings, if it is found that the temperature is very high, is to stop the equipment running, then find out the causes, and solutions for processing, but perhaps because of bearing heating for different reasons, so the solution is also different, so the particular case is particular to treat.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China