ISUTAMI BEARINGS
en
SUCFL200 Stainless Steel Mounted Bearings
E-catalog
ISUTAMI BEARINGS

SUCFL200 Stainless Steel Mounted Bearings

SUCFL200 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings axis and axis perpendicularity of the median line, bearing assembly precision or the condition of the transition of the joint venture, after the race and bearing hole of the joint venture for the clearance of the joint venture.The shaft ring of the bearing shall be fixed on the shaft to avoid axial transfer associated with the transformation.The installation method of the bearing is the change of the shaft, so the joint operation of the inner ring and the shaft is the over-win joint operation, and the joint operation of the bearing outer ring and the bearing chamber is the clearance joint operation.Standard G grade tolerance bearing.Bearing only bearing radial load thrust bearing only bearing axial load.Rigid bearing seat and shaft.Lubrication and cooling conditions are normal.
SUCFL200 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings axis and axis perpendicularity of the median line, bearing assembly precision or the condition of the transition of the joint venture, after the race and bearing hole of the joint venture for the clearance of the joint venture.The shaft ring of the bearing shall be fixed on the shaft to avoid axial transfer associated with the transformation.The installation method of the bearing is the change of the shaft, so the joint operation of the inner ring and the shaft is the over-win joint operation, and the joint operation of the bearing outer ring and the bearing chamber is the clearance joint operation.Standard G grade tolerance bearing.Bearing only bearing radial load thrust bearing only bearing axial load.Rigid bearing seat and shaft.Lubrication and cooling conditions are normal.

SUCFL200 Stainless Steel Mounted Bearings Products

SUCFL200 Stainless Steel Mounted Bearings Size Chart

Stainless Steel Mounted Bearings SUCFL200

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm)
Mass
(Kg)
in. mm a e i b g L N E S
SUCFL201 SUC201 SFL203 - 12 99 76.2 15 57 11.0 25.5 11.5 33.3 12.70 0.56
SUCFL201-8 SUC201-8 1/2 -
SUCFL202 SUC202 - 15
SUCFL202-10 SUC202-10 5/8 -
SUCFL203 SUC203 - 17
SUCFL203-11 SUC203-11 11/16 -
SUCFL204 SUC204 SFL204 - 20 113 90.0 15 60 11.0 25.5 12.0 33.3 12.70 0.52
SUCFL204-12 SUC204-12 3/4 -
SUCFL205 SUC205 SFL205 - 25 130 99.0 16 68 13.0 27.0 16.0 35.8 14.30 0.64
SUCFL205-14 SUC205-14 7/8 -
SUCFL205-15 SUC205-15 15/16 -
SUCFL205-16 SUC205-16 1 -
SUCFL206 SUC206 SFL206 - 30 148 117.0 18 80 13.0 31.0 16.0 40.2 15.90 0.93
SUCFL206-17 SUC206-17 1-1/16 -
SUCFL206-18 SUC206-18 1-1/8 -
SUCFL206-19 SUC206-19 1-3/16 -
SUCFL206-20 SUC206-20 1-1/4 -
SUCFL207 SUC207 SFL207 - 35 161 130.0 19 90 15.0 34.0 16.0 44.4 17.50 1.20
SUCFL207-20 SUC207-20 1-1/4 -
SUCFL207-21 SUC207-21 1-5/16 -
SUCFL207-22 SUC207-22 1-3/8 -
SUCFL207-23 SUC207-23 1-7/16
SUCFL208 SUC208 SFL208 - 40 175 144.0 21 100 15.0 36.0 16.0 51.2 19.00 1.59
SUCFL208-24 SUC208-24 1-1/2 -
SUCFL208-25 SUC208-25 1-9/16 -
SUCFL209 SUC209 SFL209 - 45 188 148.0 22 108 16.0 38.0 19.0 52.2 19.00 1.84
SUCFL209-26 SUC209-26 1-5/8 -
SUCFL209-27 SUC209-27 1-11/16 -
SUCFL209-28 SUC209-28 1-3/4 -
SUCFL210 SUC210 SFL210 - 50 197 157.0 22 115 16.0 40.0 19.0 54.6 19.00 2.15
SUCFL210-29 SUC210-29 1-7/8 -
SUCFL210-30 SUC210-30 1-7/8 -
SUCFL210-31 SUC210-31 1-15/16 -
SUCFL210-32 SUC210-32 2 -

SUCFL200 Stainless Steel Mounted Bearings Features

When the stainless steel mounted bearings under load conditions during operation, due to the rolling element and raceway contact surface between the contact stress increases, the bearing temperature rise, the performance of the lubricant is relatively worse, therefore, the limit of bearing rotating speed will be reduced accordingly.Due to the lower limit speed is very small, so it can not be considered, for bearing under combined load effect, because of its number increasing, the load of rolling body friction resistance increases, higher calorific value, lubrication and cooling conditions, but also increase the force applied to keep the rack, therefore, must according to the size of the bearing type and load Angle, the stainless steel mounted bearings of the limit speed reduction coefficient.

Stainless steel mounted bearings when the ellipse and a grinding machining allowance after quenching, thus, coat in raceway size precision.Bearing inner and outer raceway quenching ellipse, uniform allowance, uniform machining residual stress, so that the raceway size is stable after the final grinding of the ring, control in the process within the specified range.During the initial grinding of raceway for inner and outer raceway of bearing, the spindle rotation precision of grinding head is improved due to the machine tool equipment, the surface of raceway after rough grinding is improved, and the raceway size after final grinding is excellent, and the technical coordination keeps pace with the work.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China