ISUTAMI BEARINGS
en
SUCFL300 Stainless Steel Mounted Bearings
E-catalog
ISUTAMI BEARINGS

SUCFL300 Stainless Steel Mounted Bearings

SUCFL300 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings friction vibration is mainly refers to stainless steel mounted bearings bearing abnormal vibration, in general friction vibration in the large bearing is easy to happen, especially with grease lubrication grease lubrication performance not good when are more likely to happen.According to the test and observation, stainless steel mounted bearings produce friction vibration often have a direct bearing and lubricating oil properties.When the lubricating oil performance is not good or not clean, it is easy to appear friction vibration, but also with the rolling bearing outer raceway processing quality, if this use of special precision processing method, can better control the friction vibration.
SUCFL300 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings friction vibration is mainly refers to stainless steel mounted bearings bearing abnormal vibration, in general friction vibration in the large bearing is easy to happen, especially with grease lubrication grease lubrication performance not good when are more likely to happen.According to the test and observation, stainless steel mounted bearings produce friction vibration often have a direct bearing and lubricating oil properties.When the lubricating oil performance is not good or not clean, it is easy to appear friction vibration, but also with the rolling bearing outer raceway processing quality, if this use of special precision processing method, can better control the friction vibration.

SUCFL300 Stainless Steel Mounted Bearings Products

SUCFL300 Stainless Steel Mounted Bearings Size Chart

Stainless Steel Mounted Bearings SUCFL300

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm)
Mass
(Kg)
in. mm a e i b g L N E S
SUCFL305 SUC205 SFL305 - 25 150 113.0 16 80 13 29 19 39 15 1.52
SUCFL305-14 SUC205-14 7/8 -
SUCFL305-15 SUC205-15 15/16 -
SUCFL305-16 SUC205-16 1 -
SUCFL306 SUC206 SFL306 - 30 180 134.0 18 90 15 32 23 44 17 1.92
SUCFL306-18 SUC206-18 1-1/8 -
SUCFL306-19 SUC206-19 1-3/16 -
SUCF307 SUC207 SFL307 - 35 185 141.0 20 100 16 36 23 49 19 2.66
SUCFL307-20 SUC207-20 1-1/4 -
SUCFL307-21 SUC207-21 1-5/16 -
SUCFL307-22 SUC207-22 1-3/8 -
SUCFL308 SUC208 SFL308 - 40 200 158.0 23 112 17 40 23 56 19 3.50
SUCFL308-24 SUC208-24 1-1/2 -
SUCFL308-25 SUC208-25 1-9/16 -
SUCFL309 SUC209 SFL309 - 45 230 177.0 25 125 18 44 25 60 22 4.68
SUCFL309-26 SUC209-26 1-5/8 -
SUCFL309-27 SUC209-27 1-11/16 -
SUCFL309-28 SUC209-28 1-3/4 -
SUCFL310 SUC210 SFL310 - 50 240 187.0 28 140 19 48 25 67 22 6.44
SUCFL310-30 SUC210-30 1-7/8 -
SUCFL310-31 SUC210-31 1-15/16 -
SUCFS311 SUC311 SF311 - 55 250 198.0 30 150 20 52 25 71 25 7.69
SUCFS311-32 SUC311-32 2 -
SUCFS311-34 SUC311-34 2-7/8 -
SUCFS311-35 SUC311-35 2-3/16 -
SUCFS312 SUC312 SF312 - 60 270 212.0 33 160 22 56 31 78 26 9.40
SUCFS312-36 SUC312-36 2-1/4 -
SUCFS312-38 SUC312-38 2-3/8 -
SUCFS312-39 SUC312-39 2-7/16 -
SUCFS313 SUC313 SF313 - 65 295 240 33 175 25 58 31 78 30 11.70
SUCFS313-40 SUC313-40 2-1/2 -

SUCFL300 Stainless Steel Mounted Bearings Features

Stainless steel mounted bearings vibration is basically caused by the vibration of the bearing ring, and bearing structure, the stiffness, manufacturing accuracy, installation and usage and other factors.If the inner ring of the bearing has large radial ripples in the raceway, the outer ring of the bearing will produce radial vibration when the inner ring rotates.Bearing inner ring ripples will not only cause the radial vibration of outer ring, but also will cause the axial vibration of outer ring, bearing when the axial load can make the bearing inner and outer ring of the axial relative position changes, so the inner ring rotates the bearing outer ring, produce the axial vibration at work, for high-speed rotating bearing, due to ripple caused by the vibration frequency, may equal to the rotation frequency of the excitation shaft, which produce resonance.

Maintain the cleanness of bearing and the surrounding environment, even invisible to the naked eye the tiny dust bearing, also increases the thrust stainless steel mounted bearings wear and tear, vibration and noise.Bearings and their peripheral accessories should be kept clean, especially dust and dirt, tools and working environment should also be kept clean.When using and installing, please be careful and careful. Strong stamping and hammer are not allowed. Thrust cylindrical roller bearing is not allowed to be directly hit.Use appropriate and accurate installation tools and use special tools whenever possible. Avoid cloth and staple materials.To prevent the corrosion of the bearing, directly with the hand to take the bearing, to fully wash the sweat on the hand, and coated with high-quality mineral oil before the operation, in the rainy season and summer in particular to pay attention to rust.However, under certain special operating conditions, the bearing can obtain a longer life than the traditional calculation, especially under light load.These special operating conditions are the surface damage that may result when the rolling surface (rails and rolling parts) is effectively separated by a lubricating film and limited by contaminants.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China