ISUTAMI BEARINGS
en
SUCPW200 Stainless Steel Mounted Bearings
E-catalog
ISUTAMI BEARINGS

SUCPW200 Stainless Steel Mounted Bearings

SUCPW200 Stainless Steel Mounted Bearings
ISUTAMI stainless steel Mounted bearing in the operation of the check condition and prepare thoroughly check program has been more and more important, which focusing on the bearing, because it is the most important of all the machines rotating parts, Stainless Steel Mounted Bearings condition monitoring is an important part of the preventive maintenance, early detection of bearing damage in order to avoid because of the bearing damage caused by the unscheduled maintenance equipment during outage.Stainless Steel Mounted Bearings using the hearing to identify irregular operation is a very common method, through to check that a certain parts of abnormal noise was experienced researchers often use.If the bearing is in good running condition, it will make low sound. If it makes sharp and other irregular sound, it usually indicates that the bearing is in bad running condition.
SUCPW200 Stainless Steel Mounted Bearings
ISUTAMI stainless steel Mounted bearing in the operation of the check condition and prepare thoroughly check program has been more and more important, which focusing on the bearing, because it is the most important of all the machines rotating parts, Stainless Steel Mounted Bearings condition monitoring is an important part of the preventive maintenance, early detection of bearing damage in order to avoid because of the bearing damage caused by the unscheduled maintenance equipment during outage.Stainless Steel Mounted Bearings using the hearing to identify irregular operation is a very common method, through to check that a certain parts of abnormal noise was experienced researchers often use.If the bearing is in good running condition, it will make low sound. If it makes sharp and other irregular sound, it usually indicates that the bearing is in bad running condition.

SUCPW200 Stainless Steel Mounted Bearings Products

SUCPW200 Stainless Steel Mounted Bearings Size Chart

Stainless Steel Mounted Bearings SUCPW200

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm)
Mass
(Kg)
in. mm h a e b g W F t S B
SUCPW201 SUC201 SPW203 - 12 33.3 65 50.8 32 8 62 13 M8 12.7 31.0 0.70
SUCPW201-8 SUC201-8 1/2 -
SUCPW202 SUC202 - 15
SUCPW202-10 SUC202-10 5/8 -
SUCPW203 SUC203 - 17
SUCPW203-11 SUC203-11 11/16 -
SUCPW204 SUC204 SPW204 - 20 33.3 65 50.8 32 11 64 13 M8 12.7 31.0 0.66
SUCPW204-12 SUC204-12 3/4 -
SUCPW205 SUC205 SPW205 - 25 36.5 70 50.8 36 12 70 13 M10 14.3 34.1 0.84
SUCPW205-14 SUC205-14 7/8 -
SUCPW205-15 SUC205-15 15/16 -
SUCPW205-16 SUC205-16 1 -
SUCPW206 SUC206 SPW206 - 30 42.9 98 76.2 38 12 82 16 M10 15.9 38.1 1.48
SUCPW206-17 SUC206-17 1-1/16 -
SUCPW206-18 SUC206-18 1-1/8 -
SUCPW206-19 SUC206-19 1-3/16 -
SUCPW206-20 SUC206-20 1-1/4 -
SUCPW207 SUC207 SPW207 - 35 47.6 103 82.6 45 12 93 19 M10 17.5 42.9 1.94
SUCPW207-20 SUC207-20 1-1/4 -
SUCPW207-21 SUC207-21 1-5/16 -
SUCPW207-22 SUC207-22 1-3/8 -
SUCPW207-23 SUC207-23 1-7/16
SUCPW208 SUC208 SPW208 - 40 49.2 116 88.9 47 12 99 19 M12 19.0 49.2 2.40
SUCPW208-24 SUC208-24 1-1/2 -
SUCPW208-25 SUC208-25 1-9/16 -
SUCPW209 SUC209 SPW209 - 45 53.9 120 95.2 48 12 107 19 M12 19.0 49.2 2.70
SUCPW209-26 SUC209-26 1-5/8 -
SUCPW209-27 SUC209-27 1-11/16 -
SUCPW209-28 SUC209-28 1-3/4 -
SUCPW210 SUC210 SPW210 - 50 57.2 135 101.6 54 14 115 22 M16 19.0 51.6 3.22
SUCPW210-29 SUC210-29 1-7/8 -
SUCPW210-30 SUC210-30 1-7/8 -
SUCPW210-31 SUC210-31 1-15/16 -
SUCPW210-32 SUC210-32 2 -

SUCPW200 Stainless Steel Mounted Bearings Features

Abnormal concentration of nonferrous metals was found in routine analysis.There are many submicron wear particles of nonferrous metal in ferrography.The lubricating oil moisture exceeds the standard and acid value exceeds the standard.Bearing surface strain: there are iron cutting abrasive particles or black oxide particles in the ferrography, and there is temper color on the metal surface.Surface corrosion: spectral analysis shows that the concentration of iron is abnormal, and there are many submicron particles of iron in the iron spectrum, and the oil moisture exceeds the standard or the acid value exceeds the standard.Surface strain: cutting abrasive particles are found in ferrography.Fretting wear: spectral analysis revealed abnormal iron concentration, submicron wear particles with many iron components in the iron spectrum, and abnormal moisture and acid values of lubricating oil.

Under the condition of liquid lubrication, the sliding surface is separated by lubricating oil without direct contact, which can greatly reduce the friction loss and surface wear, and the oil film also has a certain capacity of vibration absorption.The sharp noise may be due to improper lubrication.Improper bearing clearance can also cause metal noise.The grooves on the track of the outer ring of the bearing will cause vibration and produce a smooth and crisp sound. If the noise is caused by the percussion scars during the installation, the noise will vary with the speed of the bearing.If there is intermittent noise, it means that the rolling parts may be damaged, bearing this sound is occurred when the damaged surface is rolled out, bearing if there are pollutants often cause, serious bearing damage will produce irregular and huge noise.Bearing damage is detected by hearing, but it is usually present and must be replaced immediately.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China