ISUTAMI BEARINGS
en
SUCST200 Stainless Steel Mounted Bearings
E-catalog
ISUTAMI BEARINGS

SUCST200 Stainless Steel Mounted Bearings

SUCST200 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings by the radial and axial support, and on one side of the bearing as the fixed end, it has suffered two fixed shaft radial and axial load type and the function of the relative bearing axial displacement.As the free end is known, only bear radial load, axial relative motion can be.Fixed end bearing must be compared with fixed shaft and bearing, more suitable bearing can withstand, but the installation must maintain a certain radial bearing box spacing.Because the axial length of the free bearing changes thermal expansion does not occur extrusion.
SUCST200 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings by the radial and axial support, and on one side of the bearing as the fixed end, it has suffered two fixed shaft radial and axial load type and the function of the relative bearing axial displacement.As the free end is known, only bear radial load, axial relative motion can be.Fixed end bearing must be compared with fixed shaft and bearing, more suitable bearing can withstand, but the installation must maintain a certain radial bearing box spacing.Because the axial length of the free bearing changes thermal expansion does not occur extrusion.

SUCST200 Stainless Steel Mounted Bearings Products

SUCST200 Stainless Steel Mounted Bearings Size Chart

Stainless Steel Mounted Bearings SUCST200

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm)
Mass
(Kg)
in. mm w h g b N q o a e p j k L B s
SUCST201 SUC201 ST203 - 12 94 61 10 51 19 32 16 89 76 51 32 13.5 24 31.0 12.7 0.93
SUCST201-8 SUC201-8 1/2 -
SUCST202 SUC202 - 15
SUCST202-10 SUC202-10 5/8 -
SUCST203 SUC203 - 17
SUCST203-11 SUC203-11 11/16 -
SUCST204 SUC204 ST204 - 20 94 61 10 51 19 32 16 89 76 51 32 13.5 24 31.0 12.7 0.89
SUCST204-12 SUC204-12 3/4 -
SUCST205 SUC205 ST205 - 25 97 62 10 51 19 32 16 89 76 51 32 13.5 24 34.1 14.3 0.99
SUCST205-14 SUC205-14 7/8 -
SUCST205-15 SUC205-15 15/16 -
SUCST205-16 SUC205-16 1 -
SUCST206 SUC206 ST206 - 30 113 70 10 57 22 37 16 102 89 56 37 13.5 24 38.1 15.9 1.46
SUCST206-17 SUC206-17 1-1/16 -
SUCST206-18 SUC206-18 1-1/8 -
SUCST206-19 SUC206-18 1-3/16 -
SUCST206-20 SUC206-20 1-1/4 -
SUCST207 SUC207 ST207 - 35 129 78 13 64 22 37 16 102 89 64 37 13.5 30 42.9 17.5 1.81
SUCST207-20 SUC207-20 1-1/4 -
SUCST207-21 SUC207-21 1-5/16 -
SUCST207-22 SUC207-22 1-3/8 -
SUCST207-23 SUC207-23 1-7/16 -
SUCST208 SUC208 ST208 - 40 144 88 16 83 28 49 19 114 102 83 49 17.5 35 49.2 19.0 2.68
SUCST208-24 SUC208-24 1-1/2 -
SUCST208-25 SUC208-25 1-9/16 -
SUCST209 SUC209 ST209 - 45 144 87 16 83 28 49 19 117 102 83 49 17.5 35 49.2 19.0 2.99
SUCST209-26 SUC209-26 1-5/8 -
SUCST209-27 SUC209-27 1-11/16 -
SUCST209-28 SUC209-28 1-3/4 -
SUCST210 SUC210 ST210 - 50 149 90 16 86 28 49 19 117 102 83 49 17.5 35 51.6 19.0 2.98
SUCST210-29 SUC210-29 1-13/16 -
SUCST210-30 SUC210-30 1-7/8 -
SUCST210-31 SUC210-31 1-15/16 -
SUCST210-32 SUC210-32 2 -

SUCST200 Stainless Steel Mounted Bearings Features

Axial displacement occurs in the bearing ring, may also occur in the basic material requirements of the bearing depends on the working characteristics of the bearing.In general, bearings with high contact fatigue strength, wear resistance, high elastic limit and yield strength, high and uniform hardness, a certain impact toughness, good dimensional stability, good corrosion resistance, good process performance.To work under the special condition of stainless steel mounted bearings material, according to its specific requirements should also have its conditions that meet the needs of special performance, high temperature resistant, low temperature resistance, corrosion resistance, anti radiation, magnetic properties, etc.

Stainless steel mounted bearings are not allowed to use hammer percussion bearing directly, not allowed by transfer roller pressure.Use appropriate and accurate installation tools and use special tools whenever possible. Avoid cloth and staple materials.Rust prevent stainless steel mounted bearings, directly with the hand take stainless steel mounted bearings, to fully wash hands sweat, and again after coated with high quality mineral oils, especially in the rainy season and summer to pay attention to rust.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China