ISUTAMI BEARINGS
en
SUCT200 Stainless Steel Mounted Bearings
E-catalog
ISUTAMI BEARINGS

SUCT200 Stainless Steel Mounted Bearings

SUCT200 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings need to confirm the damage state, bearing ring guard card, reason can consider, lack of lubricant, not suitable for, for the defect of oil discharge structure, foreign invasion, bearing installation error, the deflection of the shaft is too large, also can have these reasons.The cavitation erosion of bearing is the form of surface damage caused by contact between solid surface and liquid and relative movement.When the lubricating oil in the oil film of low pressure area, oil will form bubbles, the bubbles movement to high, the pressure under the action of air bubbles disappear, produced great impact and high temperature in an instant, the solid surface under the effect of the impact of repeated, material fatigue peeling, the friction surface appear small pits, and then developed into the cavernous scars.Cavitation erosion often occurs in the sliding bearings with heavy load, high speed, and large variation of load and speed.Bearing fluid erosion refers to the intense impact of fluid on the solid surface will cause fluid erosion, so that the solid surface puncture scars, the surface of this damage is smooth;Bearing electrical erosion is due to electrical leakage of the motor or electrical appliances, in the friction between the bearing surface sparks, resulting in point-like scars on the friction surface, which is characterized by the repeated damage in the hard shaft neck surface.
SUCT200 Stainless Steel Mounted Bearings
ISUTAMI stainless steel mounted bearings need to confirm the damage state, bearing ring guard card, reason can consider, lack of lubricant, not suitable for, for the defect of oil discharge structure, foreign invasion, bearing installation error, the deflection of the shaft is too large, also can have these reasons.The cavitation erosion of bearing is the form of surface damage caused by contact between solid surface and liquid and relative movement.When the lubricating oil in the oil film of low pressure area, oil will form bubbles, the bubbles movement to high, the pressure under the action of air bubbles disappear, produced great impact and high temperature in an instant, the solid surface under the effect of the impact of repeated, material fatigue peeling, the friction surface appear small pits, and then developed into the cavernous scars.Cavitation erosion often occurs in the sliding bearings with heavy load, high speed, and large variation of load and speed.Bearing fluid erosion refers to the intense impact of fluid on the solid surface will cause fluid erosion, so that the solid surface puncture scars, the surface of this damage is smooth;Bearing electrical erosion is due to electrical leakage of the motor or electrical appliances, in the friction between the bearing surface sparks, resulting in point-like scars on the friction surface, which is characterized by the repeated damage in the hard shaft neck surface.

SUCT200 Stainless Steel Mounted Bearings Products

SUCT200 Stainless Steel Mounted Bearings Size Chart

Stainless Steel Mounted Bearings SUCT200

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm)
Mass
(Kg)
in. mm w h g b N q o a e p j k L B s
SUCT201 SUC201 ST203 - 12 94 61 10 51 19 32 16 89 76 51 32 12 21 31.0 12.7 0.93
SUCT201-8 SUC201-8 1/2 -
SUCT202 SUC202 - 15
SUCT202-10 SUC202-10 5/8 -
SUCT203 SUC203 - 17
SUCT203-11 SUC203-11 11/16 -
SUCT204 SUC204 ST204 - 20 94 61 10 51 19 32 16 89 76 51 32 12 21 31.0 12.7 0.89
SUCT204-12 SUC204-12 3/4 -
SUCT205 SUC205 ST305 - 25 97 62 10 51 19 32 16 89 76 51 32 12 24 34.1 14.3 0.99
SUCT205-14 SUC205-14 7/8 -
SUCT205-15 SUC205-15 15/16 -
SUCT205-16 SUC205-16 1 -
SUCT206 SUC206 ST306 - 30 113 70 10 57 22 37 16 102 89 56 37 12 28 38.1 15.9 1.46
SUCT206-18 SUC206-18 1-1/8 -
SUCT206-19 SUC206-19 1-3/16 -
SUCT207 SUC207 ST307 - 35 129 78 13 64 22 37 16 102 89 64 37 12 32 42.9 17.5 1.81
SUCT207-20 SUC207-20 1-1/4 -
SUCT207-21 SUC207-21 1-5/16 -
SUCT207-22 SUC207-22 1-3/8 -
SUCT208 SUC208 ST308 - 40 144 88 16 83 29 49 19 114 102 83 49 16 34 49.2 19.0 2.68
SUCT208-24 SUC208-24 1-1/2 -
SUCT208-25 SUC208-25 1-9/16 -
SUCT209 SUC209 ST309 - 45 144 87 16 83 29 49 19 117 102 83 49 16 38 49.2 19.0 2.99
SUCT209-26 SUC209-26 1-5/8 -
SUCT209-27 SUC209-27 1-11/16 -
SUCT209-28 SUC209-28 1-3/4 -
SUCT210 SUC210 ST310 - 50 149 90 16 86 29 49 19 117 102 83 49 16 40 51.6 19.0 2.98
SUCT210-30 SUC210-30 1-7/8 -
SUCT210-31 SUC210-31 1-15/16 -
SUCT211 SUC211 ST311 - 55 171 106 19 95 35 64 25 146 130 102 64 22 44 55.6 22.2 4.52
SUCT211-32 SUC211-32 2 -
SUCT211-34 SUC211-34 2-7/8 -
SUCT211-35 SUC211-35 2-3/16 -
SUCT212 SUC212 ST312 - 60 194 119 19 102 35 64 32 146 130 102 64 22 46 65.1 25.4 5.57
SUCT212-36 SUC212-36 2-1/4 -
SUCT212-38 SUC212-38 2-3/8 -
SUCT212-39 SUC212-39 2-7/16 -
SUCT213 SUC213 ST313 - 65 224 137 21 121 41 70 32 167 151 111 70 26 50 65.1 25.4 7.60
SUCT213-40 SUC213-40 2-1/2 -

SUCT200 Stainless Steel Mounted Bearings Features

Stainless steel mounted bearings are basically caused by the vibration of the bearing ring, and bearing structure, stiffness, manufacturing accuracy, installation and usage and other factors.If the inner ring of the bearing has large radial ripples in the raceway, the outer ring of the bearing will produce radial vibration when the inner ring rotates.Bearing inner ring ripples will not only cause the radial vibration of outer ring, but also will cause the axial vibration of outer ring, bearing when the axial load can make the bearing inner and outer ring of the axial relative position changes, so the inner ring rotates the bearing outer ring, produce the axial vibration at work, for high-speed rotating bearing, due to ripple caused by the vibration frequency, may equal to the rotation frequency of the excitation shaft, which produce resonance.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China