ISUTAMI BEARINGS
en
SUK200 Stainless Steel Bearing
E-catalog
ISUTAMI BEARINGS

SUK200 Stainless Steel Bearing

SUK200 Stainless Steel Bearing
Stainless Steel Bearing SUK200 outer spherical Bearing inside diameter size and outside diameter size is made according to the standard tolerance, Bearing inner ring and the shaft, the outer ring with a hole tightness can only by controlling the tolerance of the shaft neck and tolerance of hole. ISUTAMI stainless steel outer spherical bearing inner ring and shaft with base hole system, stainless steel outer spherical bearing outer ring and seat hole with machine shaft system.
SUK200 Stainless Steel Bearing
Stainless Steel Bearing SUK200 outer spherical Bearing inside diameter size and outside diameter size is made according to the standard tolerance, Bearing inner ring and the shaft, the outer ring with a hole tightness can only by controlling the tolerance of the shaft neck and tolerance of hole. ISUTAMI stainless steel outer spherical bearing inner ring and shaft with base hole system, stainless steel outer spherical bearing outer ring and seat hole with machine shaft system.

SUK200 Stainless Steel Bearing Products

SUK200 Stainless Steel Bearing Size Chart

Stainless Steel Bearing SUK200

Bearing No.
Bore
Diameter
Boundary Dimensions(mm)
Basic
Load Rating
(KN)
Basic Static Load Rating
(KN)
Weight
(Kg)
d D Bi Be L Y d W T
in mm
SUK205+H2305 - 20 52 23 17 35 25 8 38 4.5 11.92 6.30 0.24
SUK205+HE2305 3/4 - 0.25
SUK205+HA2305 13/16 - 0.24
SUK206+H2306 - 25 62 26 19 38 30 8 45 5.1 16.65 9.05 0.40
SUK206+HS2306 7/8 - 0.42
SUK206+HA2306 15/16 - 0.41
SUK206+HE2306 1 - 0.37
SUK207+H2307 - 30 72 27 20 43 35 9 52 5.8 21.82 12.24 0.55
SUK207+HS2307 1-1/8 - 0.57
SUK207+HA2307 1-3/16 - 0.55
SUK208+H2308 - 35 80 29 21 46 40 10 58 6.2 25.09 14.51 0.72
SUK208+HE2308 1-1/4 - 0.78
SUK208+HA2308 1-5/16 - 0.75
SUK208+HS2308 1-3/8 - 0.72
SUK209+H2309 - 40 85 30 22 50 45 11 65 6.5 26.92 16.54 0.80
SUK209+HA2309 1-7/16 - 0.89
SUK209+HE2309 1-1/2 - 0.84
SUK209+HS2309 1-5/8 - 0.77
SUK210+H2310 - 45 90 31 24 55 50 12 70 6.5 29.81 18.54 0.93
SUK210+HA2310 1-11/16 - 0.98
SUK210+HE2310 1-3/4 - 0.95
SUK211+H2311 - 50 100 33 25 59 55 12 75 7.3 36.87 23.38 1.19
SUK211+HS2311 1-7/8 - 1.28
SUK211+HA2311 1-15/16 - 1.22
SUK211+HE2311 2 - 1.17
SUK212+H2312 - 55 110 36 27 62 60 13 80 7.7 40.60 26.35 1.52
SUK212+HA2312 2-1/16 - 1.62
SUK212+HS2312 2-1/8 - 1.56
SUK213+H2313 - 60 120 38 28 65 65 14 85 8.3 48.63 32.00 1.91
SUK213+HA2313 2-3/16 - 2.10
SUK213+HE2313 2-1/4 - 2.04
SUK213+HS2313 2-3/8 - 1.89

SUK200 Stainless Steel Bearing Features

To choose the right fit, it is necessary to know the actual load condition, working temperature and other requirements of the stainless steel outer spherical bearing, which is actually very difficult. Therefore, most cases are based on the use of refined selection.

The load size is determined by the amount of overwin between the ring and the shaft or the shell. The heavier load USES the larger overwin amount, while the lighter load USES the smaller overwin amount.

We are Stainless Steel Bearing is not correct, cause ISUTAMI Bearing service life is reduced, serious still can make the mechanical received damage, bring unnecessary loss, familiar with the basic operation environment of outer spherical Bearing, and some common methods for detection of ISUTAMI Bearing is very necessary. When in use, we must grasp the use of the bearing in the machine, and the use of conditions and the need to meet the conditions of use, the outer spherical bearing in high speed rotation, especially when the speed is close to or exceed the limit speed recorded in the size table, should pay attention to.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China