ISUTAMI BEARINGS
en
Triangle Flange Mounted Unit Pressed Steel
E-catalog
ISUTAMI BEARINGS

Triangle Flange Mounted Unit Pressed Steel

Triangle Flange Mounted Unit Pressed Steel
ISUTAMI pressed steel triangle flange mounted unit, also known as ISUTAMI 3-bolt pressed steel triangle flange mounted bearing unit, consisting of two main components: a stamped steel housing and a built-in spherical bearing. The housing of the unit is a hexagonal flange one, with three short sides extending outward. The flange housing is made of zinc-plated low carbon pressed steel and has an anti-corrosion function. There are three square bolt holes distributed on the triangular flange, and the angle between each hole is 120°. These holes are primarily used to install the entire bearing unit. The spherical bearing inside the steel bearing housing is a rolling ball one, which is used to reduce the friction of the transmission equipment during working. There is a dust-proof rubber ring on each side of the bearing. In addition, the inner ring of the bearing is generally divided into two types: a set screw locking and an eccentric locking, which can fix a circular shaft. Besides, this series of products is pre-lubricated.
Triangle Flange Mounted Unit Pressed Steel
ISUTAMI pressed steel triangle flange mounted unit, also known as ISUTAMI 3-bolt pressed steel triangle flange mounted bearing unit, consisting of two main components: a stamped steel housing and a built-in spherical bearing. The housing of the unit is a hexagonal flange one, with three short sides extending outward. The flange housing is made of zinc-plated low carbon pressed steel and has an anti-corrosion function. There are three square bolt holes distributed on the triangular flange, and the angle between each hole is 120°. These holes are primarily used to install the entire bearing unit. The spherical bearing inside the steel bearing housing is a rolling ball one, which is used to reduce the friction of the transmission equipment during working. There is a dust-proof rubber ring on each side of the bearing. In addition, the inner ring of the bearing is generally divided into two types: a set screw locking and an eccentric locking, which can fix a circular shaft. Besides, this series of products is pre-lubricated.

Triangle Flange Mounted Unit Pressed Steel Products


Triangle Flange Mounted Unit Pressed Steel Features

ISUTAMI pressed steel triangle flange housings are lighter in weight and smaller in size than the cast iron triangle flange types. The largest weight of 3-bolt stamped steel triangular flange mounted unit is no more than 1 kg. However, the mounted bearing unit can only be used in applications where the load is small. At present, ISUTAMI can provide two different types of products: SBPFT series bearing unit and SAPFT series bearing unit. Correspondingly, among the two products, the SB200 series ball bearing and the SA200 series ball bearing are combined with the PFT series bearing housing to form a complete bearing unit. ISUTAMI 3-bolt steel triangle flange mounted bearing unit is easy to assemble and disassemble, has a long service life as well as a small footprint, and is used in some specific mechanical equipment.

In addition, ISUTAMI can design and manufacture more sizes of 3-bolt triangle flange mounted units for customers to meet their specific needs. If you have special needs, please feel free to contact us.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China