ISUTAMI BEARINGS
en
UCFBPL200 Plastic Mounted Bearing
E-catalog
ISUTAMI BEARINGS

UCFBPL200 Plastic Mounted Bearing

UCFBPL200 Plastic Mounted Bearing
Plastic Mounted Bearing stresses on lubrication and sealing, which directly affects its service life.Bearing oil seal due to oil leakage, dust, poor waterproof effect, in addition to lubricating oil, in some bearings may appear in the air obstruction caused by oil, has not been able to meet the increasingly high requirements for use.The Plastic Mounted Bearing Bearing is known for its complex structure, in which the reverse-mounted single-blade rubber oil seal is used as radial seal and the other double-blade rubber oil seal is used as end face seal.When the oil was injected into the inner chamber of the Plastic Mounted Bearing, the old oil, wear products and excess lubricating oil spilled from the contact point between the inner surface of the rubber oil seal and the journal of the cruciform shaft. It did not need to install the relief valve, so it had a good effect of dust and water resistance.When used in dusty conditions, bearing life can be significantly improved.
UCFBPL200 Plastic Mounted Bearing
Plastic Mounted Bearing stresses on lubrication and sealing, which directly affects its service life.Bearing oil seal due to oil leakage, dust, poor waterproof effect, in addition to lubricating oil, in some bearings may appear in the air obstruction caused by oil, has not been able to meet the increasingly high requirements for use.The Plastic Mounted Bearing Bearing is known for its complex structure, in which the reverse-mounted single-blade rubber oil seal is used as radial seal and the other double-blade rubber oil seal is used as end face seal.When the oil was injected into the inner chamber of the Plastic Mounted Bearing, the old oil, wear products and excess lubricating oil spilled from the contact point between the inner surface of the rubber oil seal and the journal of the cruciform shaft. It did not need to install the relief valve, so it had a good effect of dust and water resistance.When used in dusty conditions, bearing life can be significantly improved.

UCFBPL200 Plastic Mounted Bearing Products

UCFBPL200 Plastic Mounted Bearing Size Chart

Plastic Mounted Bearing UCFBPL200

Bearing No. Bore Dia Boundary Dimensions(mm)
Housing Weight
(Kg)
Bull.fiss.
Bolt Size
in. mm a b c d e f g h i j k l m n
UCFBPL201 1/2 12 76.2 62 38.1 42.9 33.7 22.2 11.4 108.0 15.4 26.5 10.7 63.4 18.3 12.7 0.10 M10
UCFBPL202 9/16  5/8 15 76.2 62 38.1 42.9 33.7 22.2 11.4 108.0 15.4 26.5 10.7 63.4 18.3 12.7 0.10 M10
UCFBPL203 11/16 17 76.2 62 38.1 42.9 33.7 22.2 11.4 108.0 15.4 26.5 10.7 63.4 18.3 12.7 0.10 M10
UCFBPL204 3/4 20 76.2 62 38.1 42.9 33.7 22.2 11.4 108.0 15.4 26.5 10.7 63.4 18.3 12.7 0.10 M10
UCFBPL205 16/16  7/18  15/16  1 25 85.7 64 41.3 46.0 40.7 28.6 11.4 120.6 21.0 34.0 10.7 70.0 19.7 14.3 0.12 M10
UCFBPL206 1-1/16  1-1/8  1-3/16  1-1/4 30 95.0 76 47.6 52.4 41.2 31.8 13.3 138.5 19.0 32.0 10.7 83.0 22.2 15.9 0.16 M10
UCFBPL207 1-1/4  1-5/16  1-3/8   1-7/16 35 108.0 89 50.8 60.3 46.8 31.8 16.1 157.0 21.4 36.5 13.1 95.0 25.4 17.5 0.18 M12

UCFBPL200 Plastic Mounted Bearing Features

Plastic Mounted Bearing has simple structure, high strength, good durability, low production cost, at the same time must pay attention to the connection of two axis Angle shoulds not be too large, when ° from 4 to 16 ° Angle, Bearing life will drop significantly.

Plastic Mounted has the advantages of convenient dismounting, reliable use, good process control and mass production.Plastic bearing is an annular groove in the middle of the bearing, when the bearing dynamic fit into the correct position, the plastic bearing seat on the hole pressure into the ring groove, another hole with a vertical ring groove plastic overflow.The Plastic Mounted Bearing of this structure is reliable and its axial movement is small, but it is inconvenient to assemble and disassemble.In order to prevent axial channeling and heating, ensure that the end face clearance is always zero in any state.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China