ISUTAMI BEARINGS
en
UCP Series Pillow Block Bearing Units
E-catalog
ISUTAMI BEARINGS

UCP Series Pillow Block Bearing Units

UCP Series Pillow Block Bearing Units
ISUTAMI UCP pillow block bearing unit, is a kind of 2-bolt pillow block bearing unit, with normal base and a reinforced ear on each side. There is an inserted spherical bearing inside the housing, it is a sort of grease sealed deep groove ball bearing, usually made of bearing steel. The bearing housing has a spherical inner ring, and the bottom is usually divided into solid and hollow types, is generally made of cast iron material. The insert spherical bearing is mounted with the bearing housing to form a bearing assembly. The bearing assembly can be directly attached to the main body of the mechanical device by two bolts, with a self-aligning function, and supplemented with grease, etc. It is a product that is very easy to install and use.

UCP series pillow block bearing units are normal duty, always with wide inner ring and set screw locks to fix a corresponding shaft. The inner bore diameter ranges from 1/2 inch up to 3 inches.

UCP series bearings have following features:
1. Self-aligning function
The outer diameter of the bearing is spherically matched with the inner race of the bearing housing, and the self-aligning function is formed between the two parts, which can compensate for the misalignment of the axis caused by the installation error and the deformation of the mounting bottom surface.

2. Large load capacity
The ball bearing with bearing housing can not only bear the radial load, but also can bear a certain axial load, and the working noise is small.

ISUTAMI UCP housing spherical bearings have a double-structured seal that can operate in harsh environments. The bearing housing is generally compact in structure, reliable in sealing, easy in assembly and disassembly, and mainly suitable for low speed and normal load applications. It is widely used in agriculture, textile, mining, metallurgy, chemical, transportation machinery and other fields.
UCP Series Pillow Block Bearing Units
ISUTAMI UCP pillow block bearing unit, is a kind of 2-bolt pillow block bearing unit, with normal base and a reinforced ear on each side. There is an inserted spherical bearing inside the housing, it is a sort of grease sealed deep groove ball bearing, usually made of bearing steel. The bearing housing has a spherical inner ring, and the bottom is usually divided into solid and hollow types, is generally made of cast iron material. The insert spherical bearing is mounted with the bearing housing to form a bearing assembly. The bearing assembly can be directly attached to the main body of the mechanical device by two bolts, with a self-aligning function, and supplemented with grease, etc. It is a product that is very easy to install and use.

UCP series pillow block bearing units are normal duty, always with wide inner ring and set screw locks to fix a corresponding shaft. The inner bore diameter ranges from 1/2 inch up to 3 inches.

UCP series bearings have following features:
1. Self-aligning function
The outer diameter of the bearing is spherically matched with the inner race of the bearing housing, and the self-aligning function is formed between the two parts, which can compensate for the misalignment of the axis caused by the installation error and the deformation of the mounting bottom surface.

2. Large load capacity
The ball bearing with bearing housing can not only bear the radial load, but also can bear a certain axial load, and the working noise is small.

ISUTAMI UCP housing spherical bearings have a double-structured seal that can operate in harsh environments. The bearing housing is generally compact in structure, reliable in sealing, easy in assembly and disassembly, and mainly suitable for low speed and normal load applications. It is widely used in agriculture, textile, mining, metallurgy, chemical, transportation machinery and other fields.

UCP Series Pillow Block Bearing Units Size Chart

Pillow Block Bearing Units UCP

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm h a e b s1 s2 g w Bi n
UCP201-8 UC201-8 P204 1/2 - 33.3 127 95 38 13 16 15 65 31 12.7 3/8 0.8
UCP202-10 UC202-10 P204 5/8 - 33.3 127 95 38 13 16 15 65 31 12.7 3/8 0.8
UCP204 UC204 P204 - 20 33.3 127 95 38 13 16 15 65 31 12.7 M10 0.8
UCP204-12 UC204-12 P204 3/4 - 33.3 127 95 38 13 16 15 65 31 12.7 3/8 0.8
UCP205 UC205 P205 - 25 36.6 140 105 38 13 16 16 70 34 14.3 M10 1.0
UCP205-14 UC205-14 P205 7/8 - 36.6 140 105 38 13 16 16 70 34 14.3 3/8 1.0
UCP205-15 UC205-15 P205 15/16 - 36.6 140 105 38 13 16 16 70 34 14.3 3/8 1.0
UCP205-16 UC205-16 P205 1 - 36.6 140 105 38 13 16 16 70 34 14.3 3/8 1.0
UCP206 UC206 P206 - 30 42.9 165 121 48 17 21 18 83 38.1 15.9 M14 1.6
UCP206-17 UC206-17 P206 1-1/16 - 42.9 165 121 48 17 21 18 83 38.1 15.9 1/2 1.6
UCP206-18 UC206-18 P206 1-1/8 - 42.9 165 121 48 17 21 18 83 38.1 15.9 1/2 1.6
UCP206-19 UC206-19 P206 1-3/16 - 42.9 165 121 48 17 21 18 83 38.1 15.9 1/2 1.6
UCP206-20 UC206-20 P206 1-1/4 - 42.9 165 121 48 17 21 18 83 38.1 15.9 1/2 1.6
UCP207 UC207 P207 - 35 47.6 167 127 48 17 21 19 94 42.9 17.5 M14 2.1
UCP207-20 UC207-20 P207 1-1/4 - 47.6 167 127 48 17 21 19 94 42.9 17.5 1/2 2.1
UCP207-21 UC207-21 P207 1-5/16 - 47.6 167 127 48 17 21 19 94 42.9 17.5 1/2 2.1
UCP207-22 UC207-22 P207 1-3/8 - 47.6 167 127 48 17 21 19 94 42.9 17.5 1/2 2.1
UCP207-23 UC207-23 P207 1-7/16 - 47.6 167 127 48 17 21 19 94 42.9 17.5 1/2 2.1
UCP208 UC208 P208 - 40 49.2 184 137 54 17 25 19 100 49.2 19 M14 2.6
UCP208-24 UC208-24 P208 1-1/2 - 49.2 184 137 54 17 25 19 100 49.2 19 1/2 2.6
UCP208-25 UC208-25 P208 1-9/16 - 49.2 184 137 54 17 25 19 100 49.2 19 1/2 2.6
UCP209 UC209 P209 - 45 54 190 146 54 17 25 20 108 49.2 19 M14 3.0
UCP209-26 UC209-26 P209 1-5/8 - 54 190 146 54 17 25 20 108 49.2 19 1/2 3.0
UCP209-27 UC209-27 P209 1-11/16 - 54 190 146 54 17 25 20 108 49.2 19 1/2 3.0
UCP209-28 UC209-28 P209 1-3/4 - 54 190 146 54 17 25 20 108 49.2 19 1/2 3.0
UCP210 UC210 P210 - 50 57.2 206 159 60 20 25 22 114 51.6 19 M16 3.6
UCP210-30 UC210-30 P210 1-7/8 - 57.2 206 159 60 20 25 22 114 51.6 19 5/8 3.6
UCP210-31 UC210-31 P210 1-15/16 - 57.2 206 159 60 20 25 22 114 51.6 19 5/8 3.6
UCP210-32 UC210-32 P210 2 - 57.2 206 159 60 20 25 22 114 51.6 19 5/8 3.6
UCP211 UC211 P211 - 55 63.5 219 171 60 20 25 22 126 55.6 22.2 M16 4.4
UCP211-32 UC211-32 P211 2 - 63.5 219 171 60 20 25 22 126 55.6 22.2 5/8 4.4
UCP211-34 UC211-34 P211 2-1/8 - 63.5 219 171 60 20 25 22 126 55.6 22.2 5/8 4.4
UCP211-35 UC211-35 P211 2-3/16 - 63.5 219 171 60 20 25 22 126 55.6 22.2 5/8 4.4
UCP212 UC212 P212 - 60 69.8 241 184 70 20 25 25 138 65.1 25.4 M16 6.2
UCP212-36 UC212-36 P212 2-1/4 - 69.8 241 184 70 20 25 25 138 65.1 25.4 5/8 6.2
UCP212-38 UC212-38 P212 2-3/8 - 69.8 241 184 70 20 25 25 138 65.1 25.4 5/8 6.2
UCP212-39 UC212-39 P212 2-7/16 - 69.8 241 184 70 20 25 25 138 65.1 25.4 5/8 6.2
UCP213 UC213 P213 - 65 76.2 265 203 70 25 29 27 150 65.1 25.4 M20 7.0
UCP213-40 UC213-40 P213 2-1/2 - 76.2 265 203 70 25 29 27 150 65.1 25.4 3/4 7.0
UCP214 UC214 P214 - 70 79.4 266 210 72 25 31 27 156 74.6 30.2 M20 7.6
UCP214-43 UC214-43 P214 2-11/16 - 79.4 266 210 72 25 31 27 156 74.6 30.2 3/4 7.6
UCP214-44 UC214-44 P214 2-3/4 - 79.4 266 210 72 25 31 27 156 74.6 30.2 3/4 7.6
UCP215 UC215 P215 - 75 82.6 275 217 74 25 31 28 163 77.8 33.3 M20 8.5
UCP215-47 UC215-47 P215 2-15/16 - 82.6 275 217 74 25 31 28 163 77.8 33.3 3/4 8.5
UCP215-48 UC215-48 P215 3 - 82.6 275 217 74 25 31 28 163 77.8 33.3 3/4 8.5
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China