ISUTAMI BEARINGS
en
UCPF Series 3 Bolt Flange Mounted Units Pressed Steel
E-catalog
ISUTAMI BEARINGS

UCPF Series 3 Bolt Flange Mounted Units Pressed Steel

UCPF Series 3 Bolt Flange Mounted Units Pressed Steel
ISUTAMI UCPF pressed steel round flange mounted unit, also known as ISUTAMI UCPF 3-bolt pressed steel round flange mounted bearing unit, consisting of two main components: a flange stamped steel housing and a built-in spherical bearing. UC means that the unit uses UC200 series ball bearings, and PF is the code name for the bearing housing. The housing of UCPF bearing unit is a round flange housing, which is made of low carbon pressed steel and galvanized on the surface of the material, so the housing has an anti-corrosion function. Three square bolt holes with a pitch of 120°are evenly distributed on the round flange. These bolt holes are used to mount the entire mounted unit. The spherical bearing inside the bearing housing is a rolling ball one, which is mainly to reduce the friction of the transmission equipment. There is a dust-proof rubber race on each side of the bearing. In addition, the bearing unit is pre-lubricated, with a grease fitting in half and a grease groove in half.

ISUTAMI UCPF 3-bolt pressed steel round flange mounted unit has a narrow inner ring and its inner ring is a set screw locking type. The bearing unit is light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 1-15/16 inches. The total diameter of the UCPF bearing unit (a) ranges from 90 mm to 156 mm; the diameter without the flange portion (f) ranges from 56 mm to 102 mm, and the side length of the bolt holes on the flange (s) is 9 mm, 10 mm or 13 mm; the bolt size range is 1/2 inch - M8; the length of the entire unit (Bi) ranges from 31.0 mm to 51.6 mm. In addition, UCPF 3-bolt pressed steel flange mounted bearing unit has an overall weight range of 0.35 kg to 2 kgs.

ISUTAMI UCPF pressed steel round flange mounted unit, is easy to assemble and disassemble, has a long service life under certain conditions, and is used in some specific machinery and equipment. ISUTAMI can also provide a 4-bolt round flange mounted unit, and the 4-bolt product is more stable after installation. Moreover, we can design and manufacture other sizes of 3-bolt or 4-bolt pressed steel round flange mounted units for customers. If you have special needs, feel free to contact our sales team.
UCPF Series 3 Bolt Flange Mounted Units Pressed Steel
ISUTAMI UCPF pressed steel round flange mounted unit, also known as ISUTAMI UCPF 3-bolt pressed steel round flange mounted bearing unit, consisting of two main components: a flange stamped steel housing and a built-in spherical bearing. UC means that the unit uses UC200 series ball bearings, and PF is the code name for the bearing housing. The housing of UCPF bearing unit is a round flange housing, which is made of low carbon pressed steel and galvanized on the surface of the material, so the housing has an anti-corrosion function. Three square bolt holes with a pitch of 120°are evenly distributed on the round flange. These bolt holes are used to mount the entire mounted unit. The spherical bearing inside the bearing housing is a rolling ball one, which is mainly to reduce the friction of the transmission equipment. There is a dust-proof rubber race on each side of the bearing. In addition, the bearing unit is pre-lubricated, with a grease fitting in half and a grease groove in half.

ISUTAMI UCPF 3-bolt pressed steel round flange mounted unit has a narrow inner ring and its inner ring is a set screw locking type. The bearing unit is light duty. The diameter of the round shaft that fits the inner ring ranges from 20 mm to 1-15/16 inches. The total diameter of the UCPF bearing unit (a) ranges from 90 mm to 156 mm; the diameter without the flange portion (f) ranges from 56 mm to 102 mm, and the side length of the bolt holes on the flange (s) is 9 mm, 10 mm or 13 mm; the bolt size range is 1/2 inch - M8; the length of the entire unit (Bi) ranges from 31.0 mm to 51.6 mm. In addition, UCPF 3-bolt pressed steel flange mounted bearing unit has an overall weight range of 0.35 kg to 2 kgs.

ISUTAMI UCPF pressed steel round flange mounted unit, is easy to assemble and disassemble, has a long service life under certain conditions, and is used in some specific machinery and equipment. ISUTAMI can also provide a 4-bolt round flange mounted unit, and the 4-bolt product is more stable after installation. Moreover, we can design and manufacture other sizes of 3-bolt or 4-bolt pressed steel round flange mounted units for customers. If you have special needs, feel free to contact our sales team.

UCPF Series 3 Bolt Flange Mounted Units Pressed Steel Size Chart

2 Bolt Flange Mounted Units Pressed Steel UCPF

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm a e g c s f Bi n
UCPF210-31 UC210-31 PF210 1-15/16 - 156 127 3.8 22 13 102 51.6 19.0 1/2 2.00
UCPF210-32 UC210-32 PF210 2 - 156 127 3.8 22 13 102 51.6 19.0 1/2 2.00
UCPF209-28 UC209-28 PF209 1-3/4 - 149 121 3.4 22 13 97 49.2 19.0 1/2 1.70
UCPF210 UC210 PF210 - 50 156 127 3.8 22 13 102 51.6 19.0 M14 2.00
UCPF210-30 UC210-30 PF210 1-7/8 - 156 127 3.8 22 13 102 51.6 19.0 1/2 2.00
UCPF209 UC209 PF209 - 45 149 121 3.4 22 13 97 49.2 19.0 M14 1.70
UCPF209-26 UC209-26 PF209 1-5/8 - 149 121 3.4 22 13 97 49.2 19.0 1/2 1.70
UCPF209-27 UC209-27 PF209 1-11/16 - 149 121 3.4 22 13 97 49.2 19.0 1/2 1.70
UCPF208 UC208 PF208 - 40 148 119 3.4 21 13 90 49.2 19.0 M14 1.30
UCPF208-24 UC208-24 PF208 1-1/2 - 148 119 3.4 21 13 90 49.2 19.0 1/2 1.30
UCPF208-25 UC208-25 PF208 1-9/16 - 148 119 3.4 21 13 90 49.2 19.0 1/2 1.30
UCPF207-21 UC207-21 PF207 1-5/16 - 122 100 2.6 19 10 81 42.9 17.5 3/8 0.84
UCPF207-22 UC207-22 PF207 1-3/8 - 122 100 2.6 19 10 81 42.9 17.5 3/8 0.84
UCPF207-23 UC207-23 PF207 1-7/16 - 122 100 2.6 19 10 81 42.9 17.5 3/8 0.84
UCPF206-20 UC206-20 PF206 1-1/4 - 113 90 2.6 17 10 71 38.1 15.9 3/8 0.68
UCPF207 UC207 PF207 - 35 122 100 2.6 19 10 81 42.9 17.5 3/8 0.84
UCPF207-20 UC207-20 PF207 1-1/4 - 122 100 2.6 19 10 81 42.9 17.5 3/8 0.84
UCPF206-17 UC206-17 PF206 1-1/16 - 113 90 2.6 17 10 71 38.1 15.9 3/8 0.68
UCPF206-18 UC206-18 PF206 1-1/8 - 113 90 2.6 17 10 71 38.1 15.9 3/8 0.68
UCPF206-19 UC206-19 PF206 1-3/16 - 113 90 2.6 17 10 71 38.1 15.9 3/8 0.68
UCPF205-15 UC205-15 PF205 15/16 - 95 76 2.1 17 9 66 34 14.3 5/16 0.40
UCPF205-16 UC205-16 PF205 1 - 95 76 2.1 17 9 66 34 14.3 5/16 0.40
UCPF206 UC206 PF206 - 30 113 90 2.6 17 10 71 38.1 15.9 M10 0.68
UCPF204-12 UC204-12 PF204 3/4 - 90 71 2.1 16 9 56 31 12.7 5/16 0.35
UCPF205 UC205 PF205 - 25 95 76 2.1 17 9 66 34 14.3 M8 0.40
UCPF205-14 UC205-14 PF205 7/8 - 95 76 2.1 17 9 66 34 14.3 5/16 0.40
UCPF201-8 UC201-8 PF204 1/2 - 90 71 2.1 16 9 56 31 12.7 5/16 0.35
UCPF202-10 UC202-10 PF204 5/8 - 90 71 2.1 16 9 56 31 12.7 5/16 0.35
UCPF204 UC204 PF204 - 20 90 71 2.1 16 9 56 31 12.7 M8 0.35
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China