ISUTAMI BEARINGS
en
UCPFL Series Round Flange Mounted Unit Pressed Steel
E-catalog
ISUTAMI BEARINGS

UCPFL Series Round Flange Mounted Unit Pressed Steel

UCPFL Series Round Flange Mounted Unit Pressed Steel
ISUTAMI UCPFL 2-bolt pressed steel flange mounted unit, also known as ISUTAMI UCPFL 2-bolt diamond pressed steel flange mounted unit, which is mainly composed of PFL200 series pressed steel housing and UC200 series insert spherical ball bearing . The bearing housing of the UCPFL mounted unit is a diamond-shaped flange type, made of low carbon steel material and galvanized on the surface for superior corrosion resistance. The flanges on both sides of the housing have a square mounting bolt hole with the side length (s) of 9 mm or 10 mm and a corresponding bolt size range of 3/8 inch - M8. A spherical bearing is mounted inside the bearing housing, which is mainly made of bearing steel material. One side of the inner ring for the bearing has an extended portion, and two set screws are on it for mounting the matching round shaft.

The inner ring of ISUTAMI UCPFL 2-bolt diamond pressed steel flange mounted unit is a narrow one as well as a set screw locking type. The entire bearing unit is light duty. The diameter of the round shaft that fits its inner ring ranges from 20 mm to 1-5/16 inches. The length of the UCPFL mounted bearing unit (a) ranges from 90 mm to 125 mm; the overall width (b) ranges from 67 mm to 94 mm, and the length between the center points of the two bolt holes (e) ranges from 71 mm to 100 mm. The thickness of the unit (Bi) ranges from 31.0 mm to 42.9 mm. In addition, UCPFL 2 bolted pressed steel flange mounted units have an overall weight range of 0.3 kg-0.7 kg.

ISUTAMI UCPFL 2-bolt pressed steel flange mounted unit is widely used in transmission systems since it is easy to disassemble and install, and has a long service life under certain conditions, which has attracted more and more customers' attention. In addition, ISUTAMI can design and produce more 2-bolt stamped steel flange housing units for the required sizes to meet the specific needs from customers.
UCPFL Series Round Flange Mounted Unit Pressed Steel
ISUTAMI UCPFL 2-bolt pressed steel flange mounted unit, also known as ISUTAMI UCPFL 2-bolt diamond pressed steel flange mounted unit, which is mainly composed of PFL200 series pressed steel housing and UC200 series insert spherical ball bearing . The bearing housing of the UCPFL mounted unit is a diamond-shaped flange type, made of low carbon steel material and galvanized on the surface for superior corrosion resistance. The flanges on both sides of the housing have a square mounting bolt hole with the side length (s) of 9 mm or 10 mm and a corresponding bolt size range of 3/8 inch - M8. A spherical bearing is mounted inside the bearing housing, which is mainly made of bearing steel material. One side of the inner ring for the bearing has an extended portion, and two set screws are on it for mounting the matching round shaft.

The inner ring of ISUTAMI UCPFL 2-bolt diamond pressed steel flange mounted unit is a narrow one as well as a set screw locking type. The entire bearing unit is light duty. The diameter of the round shaft that fits its inner ring ranges from 20 mm to 1-5/16 inches. The length of the UCPFL mounted bearing unit (a) ranges from 90 mm to 125 mm; the overall width (b) ranges from 67 mm to 94 mm, and the length between the center points of the two bolt holes (e) ranges from 71 mm to 100 mm. The thickness of the unit (Bi) ranges from 31.0 mm to 42.9 mm. In addition, UCPFL 2 bolted pressed steel flange mounted units have an overall weight range of 0.3 kg-0.7 kg.

ISUTAMI UCPFL 2-bolt pressed steel flange mounted unit is widely used in transmission systems since it is easy to disassemble and install, and has a long service life under certain conditions, which has attracted more and more customers' attention. In addition, ISUTAMI can design and produce more 2-bolt stamped steel flange housing units for the required sizes to meet the specific needs from customers.

UCPFL Series Round Flange Mounted Unit Pressed Steel Size Chart

Round Flange Mounted Unit Pressed Steel UCPFL

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm) Bolt Size
Mass
(Kg)
in. mm a e g c s b f Bi n
UCPFL207-21 UC207-21 PFL207 1-5/16 - 125 100 2.6 22 10 94 81 42.9 17.5 3/8 0.7
UCPFL207-22 UC207-22 PFL207 1-3/8 - 125 100 2.6 22 10 94 81 42.9 17.5 3/8 0.7
UCPFL207-23 UC207-23 PFL207 1-7/16 - 125 100 2.6 22 10 94 81 42.9 17.5 3/8 0.7
UCPFL206-20 UC206-20 PFL206 1-1/4 - 113 90 2.6 17 10 84 71 38.1 15.9 3/8 0.5
UCPFL207 UC207 PFL207 - 35 125 100 2.6 22 10 94 81 42.9 17.5 M10 0.7
UCPFL207-20 UC207-20 PFL207 1-1/4 - 125 100 2.6 22 10 94 81 42.9 17.5 3/8 0.7
UCPFL206-17 UC206-17 PFL206 1-1/16 - 113 90 2.6 17 10 84 71 38.1 15.9 3/8 0.5
UCPFL206-18 UC206-18 PFL206 1-1/8 - 113 90 2.6 17 10 84 71 38.1 15.9 3/8 0.5
UCPFL206-19 UC206-19 PFL206 1-3/16 - 113 90 2.6 17 10 84 71 38.1 15.9 3/8 0.5
UCPFL205-15 UC205-15 PFL205 15/16 - 95 76 2.1 17 9 71 60 34.0 14.3 5/16 0.3
UCPFL205-16 UC205-16 PFL205 1 - 95 76 2.1 17 9 71 60 34.0 14.3 5/16 0.3
UCPFL206 UC206 PFL206 - 30 113 90 2.6 17 10 84 71 38.1 15.9 M10 0.5
UCPFL204-12 UC204-12 PFL204 3/4 - 90 71 2.1 16 9 67 56 31.0 12.7 5/16 0.3
UCPFL205 UC205 PFL205 - 25 95 76 2.1 17 9 71 60 34.0 14.3 M8 0.3
UCPFL205-14 UC205-14 PFL205 7/8 - 95 76 2.1 17 9 71 60 34.0 14.3 5/16 0.3
UCPFL201-8 UC201-8 PFL204 1/2 - 90 71 2.1 16 9 67 56 31.0 12.7 5/16 0.3
UCPFL202-10 UC202-10 PFL204 5/8 - 90 71 2.1 16 9 67 56 31.0 12.7 5/16 0.3
UCPFL204 UC204 PFL204 - 20 90 71 2.1 16 9 67 56 31.0 12.7 M8 0.3
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300,China