ISUTAMI BEARINGS
UCPP Series Pillow Block Mounted Units Pressed Steel
E-catalog
ISUTAMI BEARINGS

UCPP Series Pillow Block Mounted Units Pressed Steel

UCPP Series Pillow Block Mounted Units Pressed Steel
ISUTAMI UCPP pressed steel pillow block mounted unit, also known as ISUTAMI UCPP 2-bolt pressed steel housing mounted bearing unit, is in a  stand-up structure like the stand-up cast iron mounted bearing unit, and UC is a code name for the bearing housing. The bearing is mainly composed of a stamped steel bearing housing and a spherical ball bearing. The bearing housing is made of two pieces pressed steel plates of nap-together design. The stamped steel housing has anti-corrosion function. The spherical bearing in the housing is made of bearing steel and also has a certain anti-corrosion function. The rubber seals are provided on both sides of the bearing to prevent dust from entering into the bearing body. The matching bearing of UCPP bearing unit is PP200 series rolling ball bearing.

UCPP pressed steel pillow block mounted bearing unit is light duty as well as set screw locking type, the inner ring of the insert bearing is a narrow one, and its matching mounting shaft diameter ranges from 1/2 inch up to 1-7/16 inches. The total length of the bearing unit (a) ranges from 105 mm to 146 mm, the length between the two bottom mounting bolt holes (e) ranges from 76 mm to 108 mm, and the width of the bottom (b) ranges from 25 mm to 33 mm. The overall width (Bi) of the unit ranges from 31 mm to 42.9 mm, and the height (h) of the shaft center ranges from 25.4 mm to 39.69 mm. The overall unit weight ranges from 0.22 kg to 0.73 kg.

The pressed steel stand-up housing is lighter in weight and smaller in size than the cast iron one. It is the smallest type among the stand-up type housing, however, it can only be used in applications with low load. Designed for simple applications with limited loads and speeds, the UCPP unit provides a simple and effective bearing arrangement that accommodates moderate misalignment of mounting tolerances and is easy to install on the associated equipment. ISUTAMI is able to design and manufacture more mounted bearing units with special size for different customers.
UCPP Series Pillow Block Mounted Units Pressed Steel
ISUTAMI UCPP pressed steel pillow block mounted unit, also known as ISUTAMI UCPP 2-bolt pressed steel housing mounted bearing unit, is in a  stand-up structure like the stand-up cast iron mounted bearing unit, and UC is a code name for the bearing housing. The bearing is mainly composed of a stamped steel bearing housing and a spherical ball bearing. The bearing housing is made of two pieces pressed steel plates of nap-together design. The stamped steel housing has anti-corrosion function. The spherical bearing in the housing is made of bearing steel and also has a certain anti-corrosion function. The rubber seals are provided on both sides of the bearing to prevent dust from entering into the bearing body. The matching bearing of UCPP bearing unit is PP200 series rolling ball bearing.

UCPP pressed steel pillow block mounted bearing unit is light duty as well as set screw locking type, the inner ring of the insert bearing is a narrow one, and its matching mounting shaft diameter ranges from 1/2 inch up to 1-7/16 inches. The total length of the bearing unit (a) ranges from 105 mm to 146 mm, the length between the two bottom mounting bolt holes (e) ranges from 76 mm to 108 mm, and the width of the bottom (b) ranges from 25 mm to 33 mm. The overall width (Bi) of the unit ranges from 31 mm to 42.9 mm, and the height (h) of the shaft center ranges from 25.4 mm to 39.69 mm. The overall unit weight ranges from 0.22 kg to 0.73 kg.

The pressed steel stand-up housing is lighter in weight and smaller in size than the cast iron one. It is the smallest type among the stand-up type housing, however, it can only be used in applications with low load. Designed for simple applications with limited loads and speeds, the UCPP unit provides a simple and effective bearing arrangement that accommodates moderate misalignment of mounting tolerances and is easy to install on the associated equipment. ISUTAMI is able to design and manufacture more mounted bearing units with special size for different customers.

UCPP Series Pillow Block Mounted Units Pressed Steel Size Chart

Pillow Block Mounted Units Pressed Steel UCPP

Bearing No.
Insert
Bearing No.
Housing No. Shaft Dia Boundary Dimensions(mm)
Mass
(Kg)
in. mm h a e b S1 S2 w g Bi n
UCPP207-21 UC207-21 PP207ST 1-5/16 - 39.69 146 108 33 13 19 79 6 42.9 17.5 0.73
UCPP207-22 UC207-22 PP207ST 1-3/8 - 39.69 146 108 33 13 19 79 6 42.9 17.5 0.73
UCPP207-23 UC207-23 PP207ST 1-7/16 - 39.69 146 108 33 13 19 79 6 42.9 17.5 0.73
UCPP206-20 UC206-20 PP206ST 1-1/4 - 33.34 124 95 32 10 14 67 6 38.1 15.9 0.47
UCPP207 UC207 PP207ST - 35 39.69 146 108 33 13 19 79 6 42.9 17.5 0.73
UCPP207-20 UC207-20 PP207ST 1-1/4 - 39.69 146 108 33 13 19 79 6 42.9 17.5 0.73
UCPP206-17 UC206-17 PP206ST 1-1/16 - 33.34 124 95 32 10 14 67 6 38.1 15.9 0.47
UCPP206-18 UC206-18 PP206ST 1-1/8 - 33.34 124 95 32 10 14 67 6 38.1 15.9 0.47
UCPP206-19 UC206-19 PP206ST 1-3/16 - 33.34 124 95 32 10 14 67 6 38.1 15.9 0.47
UCPP205-15 UC205-15 PP205ST 15/16 - 28.58 109 86 29 10 14 56 5 34 14.3 0.31
UCPP205-16 UC205-16 PP205ST 1 - 28.58 109 86 29 10 14 56 5 34 14.3 0.31
UCPP206 UC206 PP206ST - 30 33.34 124 95 32 10 14 67 6 38.1 15.9 0.47
UCPP204-12 UC204-12 PP204ST 3/4 - 25.4 105 76 25 10 13 53 4 31 12.7 0.22
UCPP205 UC205 PP205ST - 25 28.58 109 86 29 10 14 56 5 34 14.3 0.31
UCPP205-14 UC205-14 PP205ST 7/8 - 28.58 109 86 29 10 14 56 5 34 14.3 0.31
UCPP201-8 UC201-8 PP204ST 1/2 - 25.4 105 76 25 10 13 53 4 31 12.7 0.22
UCPP202-10 UC202-10 PP204ST 5/8 - 25.4 105 76 25 10 13 53 4 31 12.7 0.22
UCPP204 UC204 PP204ST - 20 25.4 105 76 25 10 13 53 4 31 12.7 0.22

  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China