ISUTAMI BEARINGS
en
UCTPL200 Plastic Mounted Bearing
E-catalog
ISUTAMI BEARINGS

UCTPL200 Plastic Mounted Bearing

UCTPL200 Plastic Mounted Bearing
The Plastic Mounted Bearing is matched with the stainless steel spherical Bearing, which is light in weight, easy to install and free from maintenance. It also has the shock absorption and impact resistance that the commonly used cast-iron pedestal or stamping pedestal does not have.ISUTAMI keeps innovating in the use of new materials, and Plastic Mounted is getting more and more widely used. In the process of use, some damage degree must also pay attention to master the method to judge. Using hearing to identify irregular movements is a common method. The use of a screwdriver to judge a simplified abnormal noise is often used by experienced operators and maintenance personnel. >
UCTPL200 Plastic Mounted Bearing
The Plastic Mounted Bearing is matched with the stainless steel spherical Bearing, which is light in weight, easy to install and free from maintenance. It also has the shock absorption and impact resistance that the commonly used cast-iron pedestal or stamping pedestal does not have.ISUTAMI keeps innovating in the use of new materials, and Plastic Mounted is getting more and more widely used. In the process of use, some damage degree must also pay attention to master the method to judge. Using hearing to identify irregular movements is a common method. The use of a screwdriver to judge a simplified abnormal noise is often used by experienced operators and maintenance personnel. >

UCTPL200 Plastic Mounted Bearing Products

UCTPL200 Plastic Mounted Bearing Size Chart

Plastic Mounted Bearing UCTPL200

Bearing No. Bore Dia Boundary Dimensions(mm)
Housing Weight
(Kg)
Bull.fiss.
Bolt Size
in. mm a c d h m t v w Bi n
UCTPL201 1/2 12 99 27.5 12 64 76 35 88 47 31 12.7 0.16 M16
UCTPL202 9/16  5/8 15 99 27.5 12 64 76 35 88 47 31 12.7 0.16 M16
UCTPL203 11/16 17 99 27.5 12 64 76 35 88 47 31 12.7 0.16 M16
UCTPL204 3/4 20 99 27.5 12 64 76 35 88 47 31 12.7 0.16 M16
UCTPL205 16/16  7/18  15/16  1 25 99 27.5 12 64 76 35 88 47 34 14.3 0.17 M16
UCTPL206 1-1/16  1-1/8  1-3/16  1-1/4 30 125 34.5 12 76 89 40 102 63 38.1 15.9 0.22 M16
UCTPL207 1-1/4  1-5/16  1-3/8   1-7/16 35 125 34.5 12 76 89 40 102 63 42.9 17.5 0.26 M16
UCTPL208 1-1/2  1-9/16 40 140 38.5 16 85 102 46 114 80 49.2 19 0.38 M16
UCTPL209 1-5/8  1-11/16  1-3/4 45 149 40 16 90 102 50 117 85 49.2 19 0.48 M20
UCTPL210 1-13/16  1-7/8  1-15/16  2 50 149 40 16 90 102 50 117 85 51.6 19 0.52 M20

UCTPL200 Plastic Mounted Bearing Features

Plastic Mounted Bearing would purr if it was in good condition, such as the Bearing's shrill hissing, squeaking and other noises. Plastic Mounted Bearing in a constant state of high temperature, Bearing has said in the abnormal situation, the high temperature inside the Bearing lubricant is harmful, and sometimes the Bearing temperature is caused by Bearing inner lubricant, if in the long run of more than 120 ℃ temperature will reduce the Bearing life. Causes of bearing high temperature include insufficient or excessive lubrication of lubricants, impurities in lubricants, excessive load, bearing damage, insufficient clearance, and friction caused by oil seals. Under normal circumstances, Plastic Mounted would naturally rise in temperature after the first lubrication or after the first lubrication and would persist for a day or two.

Plastic Mounted Bearing: if it is well lubricated and there is no sundries and moisture, it can be sure that the oil seal is not worn. If it is opened, the Bearing should be visually inspected and the oil seal should be inspected regularly. Check the condition of the oil seals near the bearing to ensure that they are sufficient to prevent hot liquids, corrosive liquids, and gases from seeping into the bearing along the shaft. Replace the oil seals as soon as possible if they are damaged. Check the automatic lubrication system to ensure that oil or grease enters the bearing and to ensure that the correct amount is added and to check whether the lubricant is discolored or blackened. This usually indicates that the lubricant contains impurities, which is also harmful to the use of the bearing.

The Plastic Mounted clearance refers to the maximum radial or axial activity of the other Bearing ring under the condition of fixed ring. Therefore, it is divided into radial and axial clearance. The Plastic Mounted Bearing must be neither too big nor too small. Too large clearance will result in the reduction of the number of rolling body that can bear the load at the same time and the increase of the load of a single rolling body, thus reducing the rotation accuracy of the bearing and reducing the service life. If the clearance is too small, the friction force will increase, and the heat generated will increase, aggravating the wear and tear, which can also reduce the service life of the bearing. The Plastic Mounted Bearing had to be strictly controlled and adjusted in mounting.
  • TEL:+86-574-6399-8066
  • FAX:+86-574-6399 8025
  • EMAIL: sales@isutami.com
  • ADDRESS:No.500, North 3rd Ring Road West, Cixi, Ningbo, 315300, China